Design, Manufacturing, Supply, Installation, Testing and Commissioning of 8 nos. passenger Lift at old Eye Ward of City Hospital, Cuttack

Civil works-Earth work in excavation of foundation trenches in all kinds of soil up to the required depth including Moorum, stony earth and earth mixed with boulders except sheet rocks and boulders requiring blasting including dressing, leveling the bed and depositing the excavated materials away from work site with initial leads and lifts, T&P shoring, shuttering and dewatering if required etc, complete as directed by Engineer-in-charge.

Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge.

Cement concrete (1:3:6) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.

R.C.C work of M-20 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge. (A)Raft

(B)Column in Superstructure (i)Ground floor

(ii)First floor

(iii)Second floor

(C )Plinth Beam

(D)RCC Wall

(E )Roof Beam (i)Ground floor

(ii)First floor

(iii)Second floor

(F)Lintel (i)Ground floor

(ii)First floor

(iii)Second floor

(G)Chajja (i)Ground floor

(ii)First floor

(iii)Second floor

(H)Roof slab (i)Ground floor

(ii)First floor

(iii)Second floor

Cutting, straightening coiled or bent up M.S. Rod or tor steel (TATA/ SAIL/Vizag/ Zindal etc)including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. (i)Ground floor

(ii)First floor

(iii)Second floor

Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in SUPERSTRUCTURES in all floors including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. (i)Ground floor

(ii)First floor

(iii)Second floor

Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. (i)Ground floor

(ii)First floor

(iii)Second floor

Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. (i)Ground floor

(ii)First floor

(iii)Second floor

Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge. (i)Ground floor

(ii)First floor

(iii)Second floor

Supplying, fitting & fixing of Vitrified tile of plain Ivory having thickness 8mm to 10mm confirming to IS:13755 of size 800X800 plain ivory of approved make in floors on 20mm thick bed of cement mortar (1:4) and fitting the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, labour, T&P etc complete as per direction of Engineer-in-charge.

2.5cm thick (1”) A.S. flooring with Plain cement concrete (1:2:4) using 12mm to 20mm size (20mm size not to exceed 25%) black hard crusher broken granite stone chips of approved quality & from approved quarry laid in 2 layers including watering, curing, cost of all labour, T&P, cost, conveyance, royalty & taxes of all materials required for the work etc. complete in all respect as per direction of Engineer-in-charge. Second floor

Providing, fitting and fixing of GRANITE TILES in dados of walls of approved quality & shade laid over 20mm thick cement mortar of prop. (1:3) to proper slope & level jointed with neat cement slurry with approved colour pigment to match the colour of tile including watering, curing, cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete and as per specification & direction of Engineer-in-charge. Ground floor & First floor

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, made out of M.S Square bar/ flat as per approved drawing and design including priming with red oxide primer making holes in walls and R.C.C structure, wood work etc., and making good to the damages to walls with cement concrete (1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) of approved quality with cost of all materials, labour, cost of welding, all T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-charge.

Providing, fitting & fixing of aluminium sliding window fully glazed shutter made out of aluminium frame of approved quality made of Section No.9778, 4095, 4096, 9777, 3994 as window frame section of ISI mark inserted with 5mm thick black glass of approved quality & colour including all hardware fittings, cost of all Labour, T&P, cost, conveyance and taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge.

Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. (i)Ground floor

(ii)First floor

(iii)Second floor

Painting two coats with approved plastic emulsion paint over a coat of wall primer to inside surface of walls after cleaning the surface including watering, curing with cost, conveyance, taxes of all materials, labour, T&P required for the work etc. complete as per specification & direction of Engineering-in-charge.(i)Ground floor

(ii)First floor

Finishing the wall surface with Acrylic Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge.(i)Ground floor

(ii)First floor

Distempering two coats over a coat of wall primer with any approved shade and quality in interior surface of walls up to any height & in all floors to give an even shade including cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge.Second floor

Painting two coats with approved synthetic enamel paints of approved colour, shade to new iron work over a coat of red oxide primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.(i)Ground floor

(ii)First floor

(iii)Second floor

Carriage of surplus Earth by Mechanical Means upto 5KM. Lead including Cost of all Labour for Loading & Unloading Charges, Transportation and spreading in layers at the dumping area etc. Complete as per specification & direction of Engineering-in-charge.