REPAIR / MAINT PERIMETER LIGHTING / FLOOD LIGHTS / HIGH MAST LIGHT AND STREET LIGHTS / SECURITY LIGHTS AT MIL STN SGNR

Amount

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed.

Supply and laying DWC pipe non metallic type 450 Resistance to impact ,normal resistance to bending ,IP 67 ,resistance against corrision ,non flamamble normal outside 75 mm dia confirming to IS 16205(Part-24) :2017 for protectionof LT cable all as directed.

Taking out/down unserviceable, defective any Type/size cable including disconnecting/dismantling all the electrical connections all as required at site and deposit in MES store complete all as specified and directed. (Note : Earth work shall be measured seperately)

M & L PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core complete all as specified and directed.

M & L PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 4 core complete all as specified and directed.

M & L PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 4 core complete all as specified and directed.

M & L PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core complete all as specified and directed. Note : Excavation & earth work shall be measured and paid separately under respective item of this Schedule.

M & L for boring hole under road,pavement , hard standing by trenchesless for laying DWC/GI pipe upto 80 mm suitable for outer dia of cable passing without damaging Road / Plinth /Floor complete all as specified and directed.

Supply and fix in replacement of GI pipe 50 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directed.

Taking down existing unserviceable gate light /garden light/ post top light fitting any type/any size and deposit in MES store Yard for reuse if possible complete all as specified and directed.

S&F LED post top 20 watt with cool day white light effect and efficient light distribution and IP65 protection with impact and corrosion resistant with driver and lamp complete all as specified and as directed.

S&F LED post top 40 watt lantern is a weather proof indirect lighting solution which improves horizontal uniformity with reduced glare and improved lighting control IP65 complete all as specified and as directed.

S&F LED garden light 10 watt with light effect and efficient light distribution and IP65 protection with impact and corrosion resistant with available in B-22 holder which give choice of different wattage of lamp including 10 watt warm white LED bulb including civil work for foundation of garden light complete all as specified and directed.

Supply & fixing LED land scape light/bollard light 10W/9 W with 900mm height extruded aluminium cylindrical section housing IP-65 rated complete with base & log bolt grafite grey epoxy cationic powder coated all accessories all as specified. and directed.

Supply and fixing pyramid shape integral decorative as garden light with IP 66 degree of protection of capacity 10 watt LED with all accessories pole, foundation, complete errect/fixed/mount properly at directed place with reqd fixing/ mounting arrangement and connecting/testing complete all as specified and directed.

M&L for pole of suitable height made with MS pipe of dia 40 mm with all accessories pole, foundation, complete errect/fixed/mount properly at directed place with reqd fixing/ mounting arrangement and connecting/testing complete all as specified and directed.

Supply and errection of Decorative Casting poles in different designs, shaped and 2 mtr heights to compliment the EROS LED Post Top family including decorative arm LED light 15/20 watt complete all as specified and directed.

M & L in replacement PVC insulated, PVC sheathed Copper conductor electric cable 1.5 Sq mm 3Core 1100 volts grade for existing Security light fitting on pole complete all as specified and directed.

M&L for preparation of old surface of steel tubular pole any size and type of poles and applying two coat aluminium paint over red oxide primer and applying two coats of synthetic enamel paint with black & white or yellow colour strips 30cm each up to 1.5 mtr height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80 mm high letters 150 mm above the top strip complete all as specified and directed. (Note :- Numbering of pole should be match with Security light record register)

S& F Security light bracket made out of 32/40 mm dia GI tubing medium grade made to Shape 1.5 mtr long with fixing arrangement for LED fitting duly painted with two coats of synthetic enamel paint over a coat of primer zink MS clamp and back plates fabricated from steel section and nuts , bots washers etc complete all as specified and directed.

S & F in replacement pole box with fuse/MCB provision and suitable connector for single phase connections loop in and out 10 to 16 Sqmm 2 core/4 core aluminium armoured cable branch out 2.5 Sqmm single core copper PVC insulated cable enclosed in a thermoplastic polysterene/polycarbonate enclosure which shcould be shock proof safe IP 66/67 weather proof, rust proof, dust proof, water proof, flame retradant glow wire test at min 750 C internally embeded gasket with provision for cable entry through IP 66/67 thermoplastic metric size glands and / or grommets enxlosure size (155 mm x 210 mm x 92 mm) including taking down the old unsv pole mounting box.complete all as specified and directed.

S&F in replacement motor for high mast light of suitable cap in 1 HP including repair to which to lift and lower the high mast light including arrangement for replacement of pinion/gear box, chain etc to make the high mast light servicable complete all as specified and directed.

S&F in replacement steel wire rope min 6 mm dia for high mast light to make the high mast light servicable complete all as specified and directed.

M & L in replacement PVC insulated, PVC sheathed copper conductor electric cable 2.5 Sq mm 5 core 1100 volts grade for existing high mast light fitting complete all as specified and directed.

Supply and fixing in replacement pole mounting box of size 205 x255x112 mm, shockproof, dustproof, wheatherproof, including pole mounting arrangement such as clamp made of MS flat 3x25mm size & nut bolts and washer, four way connector suitable for three phase supply, MCB SP 2.5A B cure, as per IS 10192 including taking down the old unservicable pole mounting box complete all as specified and directed.

S & F in replacement Security light timer, Three phase for 5 KW light load comprising of nature switch, contactor and MCB housed in a pole mountable enclosure complete all as specified and directed.

M&L for preparation of old surfaces of GI poles of any length and applying two coat of aluminium paint complete, including scrapping of old painted surface and one coat of red oxide paint all as specified and directed. (Note :- Numbering of pole should be match with Security light record register)

Supply and erecting factory made 7 m long hot dip galvanised octagonal pole with 130 mm dia including 1.5 Mtr single Arm HDG OD-48.3 at bottom and 70 mm dia at top A/F made up of 3mm thick HT sheet along with foundation type base plate of size 220X220X12 mm foundation bolt 4 nos of M20X750 high J type EN8 Grade with inbuilt junction box suitable for incoming 3 phase LT cable 16sqmm 4 core having 6A SP B class MCB fixed on bakelite sheet and stud type connector inside the pole, the pole shall be adequetly strengthened at the location of the door to compensate for the loss in section including excavation and RCC/PCC (1:2:4) type B1 for foundation and grouting the bolts as per manufactures instructions including marking pole numbers in letters and figures of size radium tape not less than 10cm height with red colour enamel paint including taking down old u/s pole complete all as specified and as directed.

Taking down existing unserviceable RCC/PCC/Steel tubuar/octagonal pole of any capacity / size from existing location and deposit to MES Store yard complete all as specified & directed.

S & F in replacement 3 phase Power contactors 40 A ,415 volt complete all as specified and directed .

S & F in replacement Digital Programable timer Switch For Street Light timer complete all as specified and directed .

S & F pole box with fuse/MCB provision and suitable connector for single phase connections loop in and out 10 to 16 Sqmm 2 core/4 core aluminium armoured cable branch out 2.5 Sqmm single core copper PVC insulated cable enclosed in a thermoplastic polysterene/polycarbonate enclosure which shcould be shock proof safe IP 66/67 weather proof, rust proof, dust proof, water proof, flame retradant glow wire test at min 750 C internally embeded gasket with provision for cable entry through IP 66/67 thermoplastic metric size glands and / or grommets enxlosure size (155 mm x 210 mm x 92 mm) including taking down the old unsv pole mounting box.complete all as specified and as directed.

Supply and fixing pole mounting box of size 300x200x105mm, shockproof, dustproof, wheatherproof, including pole mounting arrangement such as clamp made of MS flat 3x25mm size & nut bolts and washer, four way connector suitable for three phase supply, MCB SP 2.5A B cure, as per IS 10192 including taking down the old unservicable pole mounting box complete all as specified and directed.

S & F in replacement street light timer, single phase for 5 KW light load comprising of nature switch, contactor and MCB housed in a pole mountable enclosure complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth of not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia. by means of bolts, nuts and washers of the earth wire galvanized iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 40mm dia. up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mmthick pre-cast RCC (1:2:4) type B-0 cover with 40mm x 40mm x 6mm MS angle iron frame, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Complete all as specified and directed. Notes: - (i) GI strip up to earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement shall be 1 kg for each earth pit cover

Cutting/ trimming of tree branches not exc 10cm girth touching/approaching the LT overhead lines with hack saw/axe to clear the LT/ line upto 3 metre on each side (Horizontal and / or vertical) including disposal of trimmed branches 2 KM away inside the cantonment area & clearing site complete all as specified and directed. Note :- 3 metre width on each side of LT line shall be cleared and each span having not less than 3/5 conductors and min30-40 m pole to pole distance.

S & F Steel Poles (4.5 Meter) made out of Grooved GI Section with Cast Iron embellishments. The Poles have diameter min 83 mm at the Top, diameter min 107mm in middle and min 133mm at the Bottom. Base is made of die cast iron including 20 mm and 24 mm foundation bolts. Pole is pure polyester based powder coated with high corrosion resistance and chemical chromatised protection including Brackets made out of steel sections to be mounted on the Pole Embellishment are made in MS/Aluminium. The Bracket should be painted with multiple coats of weather resistant polyurethane paint.Hot dip galvanizing to be done on the bracket complete all as specified and directed. Note :- Cost of PCC work for foundation is deemed to be included in quotated rate.

S & F decorative light luminaire comprises by spun housing and clear cover Post Top LED Light, 60 watt with IP 65 protection. Resistant to impact and corrosion.Glare Free and better uniformity complete all as specified and directed.

Repair / cutting of damaged portion and welding with new portion and Re modification of pole for reuse again in existing position and reconnection of elect supply to the existing/new light fitting complete all as specified and directed.

NAMAN ENTERPRISES (BID ID -3495196)

Bhavya Enterprises (BID ID -3497482)