PROVN OF CLOTH DRYING LINES IN SLRS MD ACC AND GATES AT STAIRCASE OF RES BLK OF AYUDH VIHARI AND AYUDH VIHARII ADDN ALTN OF ALUMINIUM WINDOWSVENTILATORS IN LIEU OF WOODEN WINDOWSVENTILATORS IN PQ BLDGS AND PROVN OF CERTAIN REV WKS 01 02 AT NSK

Amount

M&L for 50 mm sand filling under roof or below paver blocks incl. watering and consolidation complete all as specified and directed

M&L for machine pressed pre-cast concrete coloured rubber moulded interlocking paver block any shape and size conforming to IS-15658-2006, OF 60MM thickness, M-35 grade with grey cement and pigment laid dry over complete all as specified and directed

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in hard/dense soil complete all as specified and directed

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed

M&L 20mm Rough cast plaster complete all as specified and directed

Forming groove of uniform size 15mm wide and 15mm deep in tp layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of Engineer-in-charge.

M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L for preparation of new decorated surfaces of walls of any description over 10cm in width or grith not otherwise described and applying two coats of acrylic emulsion paint and one coat of primer complete all as specified and directed

Taking down chowkats of frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm & not exc 4 Sqm each complete all as specified and directed

Taking down chowkats of frames with shutters (without taking off shutters from the frames) nexc 1.5.Sqm each complete all as specified and directed

Taking down cement plaster on brick or stone wall etc, including raking out joints, hacking for key, scrubbing down with water etc, and removing to premises outside MD land all as specified and directed.

M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in jambs, pillars, window cills, and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade except white or black over 15 mm thick Screed in CM (1:4) complete all as specified and directed

S&F aluminium windows/ventilators, made out of extruded powder coated aluminium sections , with sliding or openable shutters including frames and necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beadings, screws etc. Complete and also including the following powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hook & eyes, peg stay and handles connected items with and including, complete all as specified and directed. Notes:- (i) Minimum thickness of powder coating shall be 50 micron for widows and 50 microns for doors. (ii) Rubber beading of shutters shall be measured and paid for separately. (iii) Design of door, window and ventilator shutters and sections to be used in their fabrications shall be as approved by the Engineer-in-Charge/GE.

S&F Sheet glass 4.0mm thick,exc .5 sqm of required sizes, ordinary quality , complete all as specified & directed.

S&F frosted glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed

S&F rubber beading suitable for fixing 4mm/5mm thick glass in panels of aluminium doors/windows/ventilators. Complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples complete all as specified and directed

S&F star lock for window incl all necessary fittings complete all as specified and direced.

S&F aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide 4 to 6 nos frosted glass complete all as specified and directed.

S&F aluminium (anodized) grill of design DG 104 pattern, made out of 10mm thick dia, rod fixed with and inclding standard aluminium frame of 'F' section of size 23.40mm x 15.30mm and 1.4mm thick all as per manufacturers instructions and as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) mixed with WPC, finished even & smooth, without using extra cement complete all as specified and directed Note:- WPC shall be measured &paid separately

M & L for preparation of new/old surfaces of walls and applying two coats of distemper oil emulsion (OBD) over a coat of primer on plastered surfaces. Complete all as specified and directed

S & F in repair drapery rod ms alloy, powder coated, 25mm dia with incl decorative brass brackets etc and fixed on wall, complete all as specified and directed

S & F Readymade pulley operated clothes drying system incl of four aluminum pipes of 9 feet long each ( 4 pipe set), channel assembly, locking system ropes and all fixing materials complete all as specified and directed. Make:- Easy Dry or equivalent make as approved by CE Southern Command Pune

M&L rendering 20mm thick cm 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for praparing new surfaces (plastered) of walls and applying two coats of cement base paint over primer complete all as specified and directed

Excavating in post holes ( or similar holes) each in exc 0.5 cum getting out, harddense soil returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed

S&F mild steel work as in post tubular and struts including cutting top to shape directed, drilling holes, notching fot wires etc flat iron fillet including any special shaped and washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed

M&L cutting holes in brick walls, built in CM for inserting hold fasts and making good dismantled portion of hold fasts or lugs measured from the face of the jambs into the wall n.exc. Half brick complete all as specified and directed

M&L Preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for providing PCC 1:2:4 type B1 using 20mm aggregate as in window or dooe cills, lintels, bressummers steps, quoin blocks (for use with masonary), string courses, copings. kneelers, apex,stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).corbels, brackets,etc. (of any section indicated), withplain fair faces,including chamfers,weatherings, throat- ing etc. and setting in CM 1:4 complete with joints to match complete all as specified and as directed.

M.K Enterprises

B R Kohli Constuction Private Limited

D.N.PATIL