Construction of Godown GCI Sheet Roof Godown 30x40 At BLT EC Kirmira District Jharsuguda

Earthwork in excavation of foundation in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the Engineer In Charge.

Supplying, Filling sand in foundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P etc. complete as per specification and direction of the Engineer In Charge.

Cement Concrete (1:4:8) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work including watering & curing, etc. complete as per the direction of the Engineer- in- charge.

Plain cement concrete (1:2:4) using 12mm size hard granaite crusher broken chips of approved quality and from approved quarry including lowering laying concrete,watering and curing etc.complete for required levels laid in layers including cost and conveyance,royality & taxes of all materials and cost of all labour T &P required for the work etc.complete as per the direction of the Engineer in charge.

Providing Fly Ash brick masonry work in F&P using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc. complete as per the direction of the Engineer In Charge.

Reinforced Cement Concrete (M20 grade) with 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,required for the work etc. complete as per specification and direction for the Engineer In Charge.

Column base, frustum, Plinth band

Column & Beam

Lintel

sun shade & Chajja

Supplying, fitting and placing MS round/ deformed/ tor steel HYSD bar reinforcement of only of approved manufacturing companies of approved grade of required diameters of approved quality complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engineer In Charge.

Providing Fly Ash brick masonry work in using 230 mm X 110 mm X 80 mm in superstructure in ground floor (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc. complete as per the direction of the Engineer In Charge.

6 mm thick cement plaster (1:4) to CC surface including closed deep chipping and cleaning to C.C. surface to receive cement plaster,watering and curing etc.complete with cost,conveyance,royalities,all taxes and cost of all materials and cost of all labour with T & P required for the work complete.

16mm thick cement plaster (1:6) to inside of brick walls surface after racking out the joints…curing and watering with all cost etc.complete

12 mm cement plaster outside in cement mortar (1:6)including necessary scaffolding curing etc. in Foundation and Superstructure as per direction of Engineer In Charge.

Finishing walls with priming 1 coat with any approved primer complete as per the direction of the Engineer- in- charge.

Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the Engineer- in- charge.

Finishing walls two coats with plastic emulsion paint of approved shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per direction of Engineer In Charge.

Fitting vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles including cost of all material labour t&P etc. required for the work all complete as per direction of Engineer in Charge (for new work only)

Supply and fixing of MCM Modified Clay Material - MCM R Series Brick (087089) - 222 x 63 mm of PHOMI make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate

Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting

Supplying and fixing of MS window grill and grill gate including cost of fabrication and cost, conveyance, taxes etc. complete.

Hoisting joists and trusses with M.S Angle and placing in position.

Priming one coat to steel surface with Red oxide primer over iron workcomplete including cost and conveyance and taxes of all materials and cost of all labour with T&P required for the work ,labour welfare cess@1% etc. complete as per the direction of the Engineer in charge.

Painting 2 coats with any approved enamel paint coat of shade including cost of material with all taxes and cost of all labour with T & P required for the work etc.complete in all respect.

Supply fitting and fixing of 0.40mm GCI. Sheet in in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting as per direction of Engineer-incharge.

Internal Electrical Work

Recresed wiring to light point/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FR PVC insulated single standard multistandard copper conductor of ISI marked and ceilling rose ISI marked mounted on MS box having front modular cover of suitable size MS modular box with 1.0 sqmm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer In Charge.

Light Point & Fan Point

Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the Engineer In Charge.

Supplying and fixing LED Bulb/Ceiling Led Light(Panasonic/Philips) ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

15 Watt LED Bulb

50 Watt Street Light

Supply, Installation, Testing and Commissioning of ceiling fan (1200 mm)), including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Installation, testing and commissioning of exhaust fan up sweep 300 mmin the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Providing & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Supply and fixing of 5 amp to 32 amp rating 240 V "B" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer In Charge.

Please Enable Macros to View BoQ information