REPAIRS TO ROLLING SHUTTER,DAMAGED STRUCTURES, FLOORING FLOOR TILES, FALSE CEILING, ALUMINIUM JOINERY / PARTITION, ROOF LEEKAGE/ SEEPAGE, MISC WIRKS AND PERODICAL SERVICES AT OTM AND MD ACCN WITH DAY TO DAY PETTY REPAIRS IN BLDGS AT BCF AND NSD SEWRI

Amount

Preparation of old surfaces on walls (plastered or unplastered or previously white washed) and applying one coat of white wash complete all as specified.

All as per item No 1 above but on ceiling.

Preparation of old surfaces on walls (plastered or unplastered or previously colour washed) and applying one coat of Colour wash complete all as specified.

All as per item No 3 above but on ceiling.

Preparation of old surfaces on walls (plastered or unplastered or previously distempered ) and applying one coat of Oil bound distemper complete all as specified.

Preparation of old surfaces on walls (plastered or unplastered or previously distempered ) and applying one coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified.

Preparation of old surfaces on walls (plastered or unplastered or previously painted) and applying one coat of Cement Base paint complete all as specified.

M & L for rendering 10mm thick using polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface if any where required and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

M & L for rendering 5 mm thick using polymer modified ready mix cement based plaster on the ceiling surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface if anywhere required and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.

M&L for 15mm (10+5mm)thick in two coats polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface if anywhere required and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

M & L for external rendering 15mm thick using polymer modified ready mix cement based plaster on the wall surfaces with 3% water proofing compound including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

Supply only integral water proofing water compound Make - Scott No.1 conforming to IS-2645 1975.

M&L for preparation of new plastered surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and 1 mm thick (minimum) white cement based wall care putty on old surfaces of walls etc, finished even and smooth, complete all as specified and directed.

Preparation of new plastered surfaces on walls and applying three coat of white wash complete all as specified.

All as per item No 15 above but on ceiling

M & L for preparation of new plastered surfaces on walls, preparation for Acrylic emulsion and applying applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces

Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of malba out side the premises etc. complete as directed. Hard concrete should not be removed by force.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.) M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed.

M&L for removal of plant growth by injection with chemical glyphospate solution ( 4% concenteration) of 20ml or till refuse by cutting or injecting in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) complete all as specified.

M&L for writing letter, alphabets or figures (Block, Roman, Italic or Indian) n.exc 30 cm high with synthetic enamel paint all as specified.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour including necessary scafolding height upto 24m complete all as directed.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over one coat of primer and minimum 1 mm thick white cement based wall care putty complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 1 to 10 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.

M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of aluminium paint complete all as specified.

M & L for preparing new steel surfaces of any description and applying two coats of synthetic enamel paint over coat of primer complete all as specified and directed.

M &L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. .

M&L for preparation of new wood and wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F aluminium anodised Grills of approved design for window / Bolcony ventilators and fixing with F/U channel for window, ventilators, balcony openging in architectual or rectangular type in existing building with C.P. brass/ stainless steel screws @ 200 mm centre to centre, , including drilling as required in RCC sections, complete all as specified and directed. Note: The Grills shall be of Model DG-102/DG-104 of Make Deco or equivalent make as approved by the GE.

M & L for preparation of old wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M & L for preparation of old wooden surfaces of any description n.exc 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M & L for preparation of old Steel surfaces of any description n.exc 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

Taking down cement plaster from brick/stone masonry, walls and racking out joints, hacking for key, scrubbing down and washing with water and disposing the materials outside MD land.

M & L for preparation of old surfaces for applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm

Taking down rolling shutters area n.exc 10 sqm each and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring worm gear, lock plate etc as required, greasing, oiling, servicing for smooth functioning of all parts complete all as directed. Note: Lath strips, bottom rail, spring,gears etc. will be measured and paid seperately as supply only

All as per item No 38 above but area of rolling shutter exc 10Sqm and n.exc 15 Sqm each

All as per item No 38 above but area of rolling shutter exc 15Sqm and n.exc 20 Sqm each

Taking down mechanical rolling shutters , area of rolling shutter n.exc 10Sqm each complete all as specified and directed

Taking down mechanical rolling shutters , area of rolling shutter exc 10Sqm and n.exc 15 Sqm each complete all as specified and directed

Taking down mechanical rolling shutters , area of rolling shutter exc 15Sqm and n.exc 20 Sqm each complete all as specified and directed

Dismantling of wrought iron of mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge

Demolition of stone slab and tiles of any size and description or thickness in floors laid bedded and pointed in any mortar including screed bed.

Demolition of wall tiles of any size and description laid bedded and pointed in any mortar including backing coat.

Demolition of PCC (unreinforced) in ground floor and pavings n.exc 15 CM thick and clearing of premises.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling aluminium grid work for ceiling etc completely all as specified

Taking down aluminium windows n.exc 1.5 sqm each including frames/Tracks (openable or sliding) and grill complete all as specified and directed

Taking down shutters of any description not exc 1.00 Sqm each

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each

Taking down chowkats or frames with shutters not exc 1.50 Sqm each (without taking off shutters from the frames).

Taking down chowkats or frames with shutters exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutters from the frames).

Supply only mild steel spring made out of 6mm to 11mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working complete all as specified and directed (dia of spring 100mm to 150mm)

Supply only worm gear made out of mild steel suitable for rolling shutter mentioned in item No 38 to 40 above all as directed.

Supply only MS 75mm wide lath strips 1mm thick for rolling shutter including mild steel clips at either ends duly painted with two coats of synthetic enamel paint (shades to match with the existing) over a shop coat of red oxide primer complete all as specified and directed.

Supply only 75mm wide laths strips aluminium double wall type from 1.60 mm thick aluminium corrugated profile slats with bottom profile of aluminium with bottom rubber sealing, side guide of aluminium profile with rubber insert on both ends,

Supply only mild steel bottom rail with lock plate and two handles 150mm wide and 3mm thick including necessary locking arrangement on both sides and painting to bottom rail with and including two coats of synthetic enamel paint to match with existing over a shop coat of red oxide primer complete all as specified & directed.

Supply only 65 to 75mm wide guide rail, 3mm thick suitable for rolling shutter complete all as directed

Replacement of existing unserviceable gear box with new gear box made out of 1mm thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer, size of gear box 15cm x 15cm x 15cm complete all as specified and directed.

Taking down gear box from existing position and repairing the gear shaft and plate, greasing, oiling etc for smooth working condition, provn of new gear in repair for gear box and re-fixing gear box to its original position after repairs all as specified and directed.

S&F in repair Ball bearing for rolling shutters complete all as specified and directed by Engineer-in-Charge

S & F in repairs 1mm thick top cover galvanized iron sheet including one shop coat of red oxide primer and two coats of synthetic enamel paint shade to match with the existing complete all as specified and directed.

S&F steel rolling shutters,1mm lath thickness without ball bearing,as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type complete all as specified and directed.

S&F mild steel safety lever locks with four levers for rolling shutters complete all as specified and directed

S&F MS flat framed work such as grills,gratings, etc, with ends of bars shouldered and / or riveted , or forged into spikes framed guard bars: barred iron doors, ladders , framed balusters, walk ways, railings, framework of watertanks and similar work conforming to Fe -290, Gde-E-165 complete all as specified and directed by Engineer-in-Charge

S&F mild steel plain black sheet 1.00mm thick in hearths covering to door shutter etc with plain 40mm lap joint or welded/ riveted seams including bending, turning up, mitred angle stopped end, outlets sheet welded to frame etc complete all as specified and directed.

Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of malba out side the premises etc. complete as directed by Project Manager. Hard concrete should not be removed by force.

Providing and fixing additional steel bar in various structural elements like column ,beams and Slab etc. including drilling ,bending and fixing the bars tying with preleft binding wires etc.

Building up the profile of structural members by using polymer modified mortar thickness upto 40mm thickness including leveling profiling etc. complete. Each layer should not have a thickness more than 20 mm with epoxy latex based bond coat before each layer

M&L Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade over and including 15 mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.

M&L Coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:4

M/L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting dados etc over backing coat 10mm thick in CM 1:3.

M/L75 mm thick PCC 1:4:8 type D-2, using 40mmgraded aggregate in sub base of floors

M&L for coloured Parking tiles, heavy duty of size 300x300x10 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed. Make : JOHNS0N /SOMANI/ORIENT BELL/KAJARIA.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, partitions, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately as supply only under respective items.

M&L for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty/rubber beading in square/rectangular size as required in each pane for Partition/Door/Window/Ventilator and similar works etc.

Supply and fixing Solar control film 25 micron reflective type (gareware sun control or equivalent) , sticked to glass panes as per instructions of manufacturers

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm for new aluminium joinery, complete all as specified and directed.

M&L for Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L IInd class plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L factory made IInd class hard wood glazed and skeletion shutter 30mm thick, open rebated divided into square with plain, chamfered or rounded, mitred and rebated sash bars and prepared to receive glass, gauze, etc , sizes of members of shutters as specified in SSR part-I, section 8, clause 8.24(b); supplied and fitted to old or new chowkats complete all as specfied and directed.

S&F factory made IInd class hard wood plain framed, panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm

Ditto all as per item No 86 but fixed in repairs

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 100 mm

Ditto all as per item No 88 but fixed in repairs

S&Faluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed,250mm complete.

S&F butt hinges, medium weight cold rolled mild steel, size 100mm

Ditto all as per item No 91 but fixed in repairs

S&Fbutt hinges, medium weight cold rolled mild steel, size 75mm

Ditto all as per item No 93 but fixed in repairs

S&F Stainless steel Butt hinges 100mm long with mild steel hinge pin, bright polished and fixed, complete all as specified

S&F extruded aluminium alloy handles, fabricated type., anodised,150 mm

Ditto all as per item No 96 but fixed in repairs

S&F extruded aluminium alloy handles, fabricated type., anodised,100 mm

Ditto all as per item No 98 but fixed in repairs

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,fixed in repair

Supply and fixing 4 mm thick plain sheet glass, ordinary quality with and including provision of beading for joinery complete all as specified and directed.

S&F in repairs vitreous coloured China Europeon water closet (Pedestal Pattern) including 10 ltr capacity low level flushing cistern with necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete. Jaquar Essco Model No of EWC - ECS-WHT-551SNPP183LZ or ECS-WHT-551PNPP183LZ

S&F in vitreous China wash basin white, flat back size 550 x 400mm including 15mm dia fancy type pillar tap of Make ESSCO Model no DLX-507KN or equivalent of make Parko as approved by the GE, , chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary 450mm long outlet and inlet PVC connections pipes with PTMT check nuts complete.in repair

S&F vitreous china urinal half stall type (back or corner wall type ), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with discharge pipe etc complete all as specified and as directed by Engineer In Charge. in repairs

S&F 15mm bore brass CP Stop Cock, Make ESSCO Model no DLX-526NKN or equivalent of make Parko as approved by the GE, complete all as specified and directed.

S&F 15mm bore brass CP Bib Tap, Make ESSCO Model no DLX-511KN or equivalent of make parko as approved by the GE, complete all as specified and directed.

S&F in repairs brass chromium plated, shower rose, 125mm size with and including 195mm long 15mm bore brass chromium plated shower arm with bend of 45 degree, complete all as specified and directed.

S&F for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 25mm bore, complete all as specified and directed.

S&F tubes medium grade 15mm dia, galvanised with all fittings and fixed complete to walls and ceilings or laid to floors

Taking down chowkats or frames with shutters exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutters from the frames).

Supply & fixing 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

.- Ditto- ALL as per item no 115 here in before but fixing only

Supply & fixing 25mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Labour only for Cutting chases pinning in making good to facing where required and pointing in CM (1:4) to end of edges of shelves lintels etc. and cutting chases for concealed water tubing and making good cutting not exc 10cm girth

M & L for aluminium anodised suspended false ceiling in the panels of size 600 x 600 mm with aluminium anodised angle 30 x30 x 2 mm fixed along the wall and main and cross tees of size 31.75 x 31.75 x 1.6 mm screwed along side of walls fixed with wooden plugs and hanging from existing slab/ steel truss including 6 mm dia GI wire suspended adjustable level from rafter purlins(length as per site requirement) including 600 x600x 12 mm thick Gypsum boards ceiling of make - Everest/ Saint Gobain or equivalent including cutting and making suitable opening for light fittings and applying 2 coats of Oil bound destemper over a coat of primer with preparation of new surface etc complete all as directed by Engineer-in-charge.

M & L for cutting and making suitable opening for light fittings in 12mm thick gypsum board ceiling and applying 2 coats of Oil bound destemper over a coat of primer with preparation of new surface etc complete all as directed by Engineer-in-charge.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, partitions, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately as supply only under respective items.

Supply and fixing Solar control film 25 micron reflective type (gareware sun control or equivalent) , sticked to glass panes as per instructions of manufacturers.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm for new aluminium joinery, complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling completely existing roof treatment (excluding cement screed bed ) including loosened cement plaster and exposing the top surface of RCC slab and making good the same in CM 1:4 and removing rubbish, etc to a distance exceeding 500m and not exceeding 1.0km complete all as specified and directed by the Engineer-in-charge

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

M/L for MS rolled section/Tubular/ Hollow mild steel sections in main and cross beams, purlins hips, and jack rafters where connected to common rafters and running rails fixed with angle cleats or other connecting plates using grade Fe 410-W .

S&F plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk forming holes without any attachement.

S & F 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs at any position fixed with L-type or J-type or cranked hook bolts in patches at an maximum height of 10m complete all as specified and directed

S&F Asbestos cement onepiece plain angular ridge 6mm thick in patches at any position fixed with L-type or J-type or cranked hook bolts in patches at an maximum height of 10 m complete all as specified and directed

M&L for averaging 50 mm thick PCC 1:2:4, type -B-1, using 20mm graded stone aggregated as in padding concrete of roof mixed with WPC in the proportion as recommanded by the manufacturer(s), complete all as specified and directed, (Note : WPC will be measured and paid separately as supply only).

M&L 10 mm thick Screed bed or bedding layer in CM (1:3) with WPC when the concrete is still green complete all as specified and directed. (Note : WPC will be measured and paid separately as supply only).

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a). The roof surface shall be throughly wire brushed cleaned to eliminate all sharp projection, washed dried upto and cleaned overall foreign material and dust to receive primer. (b). The dry surface shall be primed with Torch shield primer as per manufacturer’s instructions, manufactured by the same agency as that of APP membrane. (c). Providing and laying APP modified polyester reinforced water proofing membrane with minimum weight of 3.5 Kg/Sqm, as specified here-in-before. (d). The APP membrane shall be laid using torch-on butane application with minimum 10 cm side overlap and 15 cm end overlap. The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane. (e). The APP membrane shall be taken up to minimum 200 mm on vertical surfaces. The edge of the membrane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant.

M&L for applying two coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane surfaces, complete all as specified and directed.

Dismantling water tanks and removing of premises of capacity exc 250 ltr and n.exc 500 ltr

Taking down PVC (SWR)/CI/AC pipe fixed to wall or laid in trenches in any dia

Taking down chowkats or frames with shutters not exc 1.50 Sqm each (without taking off shutters from the frames).

S&F in repairs vitreous coloured China Europeon water closet (Pedestal Pattern) including 10 ltr capacity low level flushing cistern with necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete. Jaquar Essco Model No of EWC - ECS-WHT-551SNPP183LZ or ECS-WHT-551PNPP183LZ

S&F in repairs brass chromium plated, shower rose, 125mm size with and including 195mm long 15mm bore brass chromium plated shower arm with bend of 45 degree, complete all as specified and directed.

S&F for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

S&F for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

M&L for providing and fixing toilet fittings Make : Jaquar Essco fixed in repairs a) Bib cock with wall flange 15mm dia Model no DLX-511KN

b) Pillar cock 15mm dia Model no DLX-507KN

c) Angular stop cock 15mm dia Model no DLX-526NKN

d) Two way Bib cock with flange 15mm dia Model no DLX-512ANKN

S&F Chromium plated Towel rod 600mm long including built in side brackets Model no AEC-1111N

S&F Chromium plated Toilet paper holder Model no AEC-1151N

S&F Chromium plated Towel ring Model no AEC-1121N

S&F Chromium plated Soap dish Model no ACN-1131N

S&F 30 cm corner glass shelve 12mm thick with 'D' bracket suitable for shelves Model no ACN-1173

M&L for Swivel Mirror 630mm x 445mm Rectangular Shape with complete frame Model no AKP-35795

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to b fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cwement, supplying & fixing the frame at site.

M&L for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors 110 dia.

All as per Item No.155 above but 75mm dia

M&L PVC (SWR) pipes single socketed in any length with rafter joints fixed wall 110mm dia

All as per Item No. 157 above but 75mm dia

M&L for PVC (SWR) bends any radius of 110mm dia

All as per Item No. 159bove but 75mm dia

M&L for PVC (SWR) bends any radius of 110mm dia provided with access door

All as per Item No. 161 above but 75mm dia

M&L PVC (SWR) branch piece single Y equal or unequal of 110mm dia provided with access door

All as per Item No. 163 above but 75mm dia

M&L PVC (SWR) branch piece double Y double socketted of 110mm dia bore provided with access door

All as per Item No.165 above but 75mm dia

M&L PVC (SWR) Junction single, (Single T) equal or unequal of 110mm dia bore provided with access door

All as per Item No. 167 above but 75mm dia

M&L for PVC (SWR) vent cowl of 110mm dia

All as per Item No. 169 above but 75mm dia

Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for and forming channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required internal dia of pipe 100mm maximum

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 500 Ltr complete fixed to pipe etc all as directed

M&L ball brass valves high pressure with polyuthene float valve and fly nutcomplete screwed for iron pipe or brass ferrule and fiexed in repairsFloat valve 20mm

S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in repairs 20mm bore

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&Faluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed,300mm complete. fixed in repairs

Ditto all as per item No 178 but 250 mm

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

Demoliton of Brickwork, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) Note : A sum of Rs 68,167.50 towards sch of credit shall be deducted to arrive the contract sum.

mp construction co

AM ENTERPRISES

Parmatma Enterprises