(i) Cleaning and paiting of WTP-1 (300 KLD Appx) and WTP-2 (400 KLD Appx.), (ii) Day to day maintenance of existing STP (0.80 MLD), (iii) Repair and maintenance work of 06 Nos 500 KV transformer (Power house 01, 02 and 03), (iv) Repair and general se

Amount

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

DAP (Diammonium Phosphate) for STP

Urea for STP

For Bectria Development [Gur (Jaggery) and Aata etc.] for STP

Liquide Chlorine for STP & WTP-1&2 ( 500 ml per day)

Dosing Pump

Providing and fixing of TNC Switch of approved brand as per direction of Engineer-in-Charge

Providing and fixing of Spout accessories (Front & Rear) of approved brand as per direction of Engineer-in-Charge

Providing and fixing of Coil of approved brand as per direction of Engineer-in-Charge

Providing and fixing of HT Compound of approved brand as per direction of Engineer-in-Charge

Providing and fixing of auxiliary pin & socket of approved brand as per direction of Engineer-in-Charge

Providing and fixing of Termination Kit of approved brand as per direction of Engineer-in-Charge

Providing and fixing of Heater & Thermostat of approved brand as per direction of Engineer-in-Charge

Providing and fixing of Auxiliary Switch Accessories of approved brand as per direction of Engineer-in-Charge

Providing and fixing of CAM Switch of approved brand as per direction of Engineer-in-Charge

Providing and fixing of 240 SQMM 11 KV 3.5 Core Cable of approved brand as per direction of Engineer-in-Charge

Providing and fixing of Cable Lug 240 mm of approved brand as per direction of Engineer-in-Charge

Providing and fixing of Cable Lug 120 mm of approved brand as per direction of Engineer-in-Charge

Replacement of HT Sleeve of approved brand as per direction of Engineer-in-Charge

Repair & Servicing of VCB incomer

Painting of outer side and trolleys

General Servicing and change of Mobil Filter, Air Filter, Diesel Filter, Coolent Filter, Coolant (5 Litre) and Mobil Oil (22 Litre) of approved brand as per direction of Engineer-in-Charge

Servicing and repair of Radiator and Accelerator

VINDESH SAHU (BID ID -3222431)

NIVYA CONSTRUCTION (BID ID -3222314)