Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 CrAccepted-AOC | ₹4.6 Cr | L1 | Accepted-AOC Lowest |
| 2 | L2₹5.0 Cr+₹38.9 L (8.49%)Rejected-Finance | ₹5.0 Cr+₹38.9 L (8.49%) | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹5.7 Cr+₹1.1 Cr (23.5%)Rejected-Finance NEAR INDUSTRIAL ESTATE THANDA PADDAR UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹5.7 Cr+₹1.1 Cr (23.5%) | L3 | Rejected-Finance Other than lowest |
| 4 | L4₹5.8 Cr+₹1.2 Cr (27.0%)Rejected-Finance | ₹5.8 Cr+₹1.2 Cr (27.0%) | L4 | Rejected-Finance Other than lowest |
| 5 | L5₹6.1 Cr+₹1.5 Cr (33.2%)Rejected-Finance | ₹6.1 Cr+₹1.5 Cr (33.2%) | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | J.R.G CONSTRUCTIONS L1 | K S BUILDERS L3 | JINDAL BUILDERS L2 | VISHWA MITTAR PACHYALA L5 | M/S GURU DEV BUILDERS L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Sch 'A' Part-I (Building Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only. | ||||||||
| 1.01 | Construction of balance/incomplete work for Block of Adm building (Double Storey) complete all as per detail attached Annexure-I, as specified and shown on drawings. | 1 | Each Block | 10,00,000 ₹10,00,000 Lowest | 16,00,000 ₹16,00,000 | 14,94,000 ₹14,94,000 | 19,00,000 ₹19,00,000 | 17,00,000 ₹17,00,000 |
| 1.02 | Construction of balance/incomplete work for Block of SM Barrack 1x60 Men (Triple Storey) complete all as per detail attached Annexure-II, as specified and shown on drawings. | 1 | Each Block | 3,50,00,000 ₹3,50,00,000 Lowest | 4,25,00,000 ₹4,25,00,000 | 3,58,20,000 ₹3,58,20,000 | 4,55,00,000 ₹4,55,00,000 | 4,35,00,000 ₹4,35,00,000 |
| 1.03 | Construction of balance/incomplete work for Block of MT garages including aprons complete all as per detail attached Annexure-III, as specified and shown on drawings. | 1 | Each Block | 2,50,000 ₹2,50,000 | 2,00,000 ₹2,00,000 Lowest | 2,97,000 ₹2,97,000 | 2,55,000 ₹2,55,000 | 2,50,000 ₹2,50,000 |
| 1.04 | Construction of Block of MT Accn and storage Accn for MT including ramp complete all as specified and shown on drawings. | 1 | Each Block | 25,00,000 ₹25,00,000 Lowest | 31,00,000 ₹31,00,000 | 28,80,000 ₹28,80,000 | 35,00,000 ₹35,00,000 | 32,00,000 ₹32,00,000 |
| 1.05 | Construction of balance/incomplete work of washing platform complete all as per detail attached Annexure-IV, as specified and shown on drawings. | 1 | Each | 1,00,000 ₹1,00,000 Lowest | 3,24,000 ₹3,24,000 | 3,33,000 ₹3,33,000 | 3,35,000 ₹3,35,000 | 3,30,000 ₹3,30,000 |
| 2.00 | Total Amount of Sch 'A' Part - II (Earth Work for Site Clearance and other services) | 1 | Lump sum | 1,20,000 ₹1,20,000 Lowest | 2,55,000 ₹2,55,000 | 1,80,000 ₹1,80,000 | 2,65,000 ₹2,65,000 | 2,60,000 ₹2,60,000 |
| 3.00 | Total Amount of Sch 'A' Part - III (Internal Electric Supply ) | 1 | Lump sum | 5,90,000 ₹5,90,000 Lowest | 7,55,000 ₹7,55,000 | 7,29,000 ₹7,29,000 | 7,65,000 ₹7,65,000 | 7,60,000 ₹7,60,000 |
| 4.00 | Total Amount of Sch 'A' Part - IV ((Internal Water Supply) | 1 | Lump sum | 1,30,000 ₹1,30,000 Lowest | 2,20,000 ₹2,20,000 | 1,89,000 ₹1,89,000 | 2,35,000 ₹2,35,000 | 2,25,000 ₹2,25,000 |
| 5.00 | Total Amount of Sch 'A' Part - V (Plumbing Works) | 1 | Lump sum | 3,20,000 ₹3,20,000 Lowest | 3,22,000 ₹3,22,000 | 3,96,000 ₹3,96,000 | 3,32,000 ₹3,32,000 | 3,26,000 ₹3,26,000 |
Tender Value
₹3.4 Cr
EMD Value
₹4.1 L
Closing Date
9 Aug 2025, 6:00 pmClosed
Chief Engineer Udhampur Zone
HQ Chief Engineer Udhampur Zone, PIN-900386, C/O 56 APO
COMPLETION OF INCOMPLETE/ BALANCE WORK FOR PROVISION OF OTM ACCN, OFFICE STORE, MT PARK AND ALLIED SERVICES AT KG UNDER GE 881 EWS
2025_MES_702945_3
87972-A/E8
Open Tender
Civil Works
Lump-sum
365 days
Poonch
As per NIT
8 documents required · 8 mandatory
₹2,000
GE 881 EWS
₹4.1 L
Yes
HQ Chief Engineer Udhampur Zone
14 Oct 2025
19 Jul 2025
11 Aug 2025
19 Jul 2025
9 Aug 2025
4 Aug 2025
20 Jul 2025 - 29 Jul 2025
30 Jul 2025
Amount
Sch 'A' Part-I (Building Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.
Construction of balance/incomplete work for Block of Adm building (Double Storey) complete all as per detail attached Annexure-I, as specified and shown on drawings.
Construction of balance/incomplete work for Block of SM Barrack 1x60 Men (Triple Storey) complete all as per detail attached Annexure-II, as specified and shown on drawings.
Construction of balance/incomplete work for Block of MT garages including aprons complete all as per detail attached Annexure-III, as specified and shown on drawings.
Construction of Block of MT Accn and storage Accn for MT including ramp complete all as specified and shown on drawings.
Construction of balance/incomplete work of washing platform complete all as per detail attached Annexure-IV, as specified and shown on drawings.
Total Amount of Sch 'A' Part - II (Earth Work for Site Clearance and other services)
Total Amount of Sch 'A' Part - III (Internal Electric Supply )
Total Amount of Sch 'A' Part - IV ((Internal Water Supply)
Total Amount of Sch 'A' Part - V (Plumbing Works)
Total Amount of Sch 'A' Part - VI (Sewage Disposal Work)
Total Amount of Sch 'A' Part - VII (Protectives Work)
Total Amount of Sch 'A' Part - VIII (Road, Path & Culvert Work)
Total Amount of Sch 'A' Part - IX (Area Drainage)
Total Amount of Sch 'A' Part - X (External Water Supply)
Total Amount of Sch 'A' Part - XI (External Electric Supply)
Total Amount of Sch 'A' Part - XII (Lightening Protection)
Total Amount of Sch 'A' Part - XIII (AC and Water Cooler Work)
Total Amount of Sch 'A' Part - XIV (Demolition/Dismantling)
Sch 'A' Part - XV (Misc Items of Work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.
Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to and including galvanised iron strip 32mmx6 mm as earthing lead by means of galvanised iron or steel nuts,bolts, check nuts and washers, PCC 1:3:6 type C-1 in pit, angle iron 25x25x3mm frame work with precast RCC1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12 mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mesh at top and light grade GI protection pipe 40mm bore upto 5m length for drawing in earth lead strip, adequate quantity of charcoal dust and salt alround the earth plate including excavation and earth work in any type of soil, removal of surplus spoil to a distance not exc. 50m complete all as shown in electrical plate No. 3 of MES Schedule Part-I and connected to main control board all as specified including testing on completion.
Supply and installation of voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +/- 2.5% and capacity 4KVA with all accessories and connecting cable of suitable size complete all as specified and directed.
Supply and installation of wall split AC unit indoor/outdoor complete with cordless remote control unit of dual mode hot & cold type, electric supply, single phase 240 volts and with inbuilt air ioniser and plasma filter for better indoor air quality with EER 3.2 of capacity 2TR complete all as specified and directed. Make:- Voltas/Samsung/LG/Blue star
Supply and installation of solar water heating system with heat exchanger type for cold region of 300 Ltrs capacity with electrical back up of 4KW and make up water tank as per specification complete all as specified and directed. Note:- The above rates includes fixing of mild steel stand in PCC and water tubing connection from over head tank to bathroom including necessary fitting complete and all accessories including testing etc complete all as directed.
Ceiling fan model ES 5 star rated complete with accessories work on 230V, 50HZ of size 1200mm sweep complete all as specified and directed.
Cutting of existing 40mm GI pipe and inserting Tee reducer (40x40x40mm) with and including reducer complete all as specified and directed.
Supply, Installation, commissioning and testing of Diesel Engine Generating Set with accoustic enclosure of capacity 62.5 KVA at NTP/MSL 50Hz at 1500 RPM, 0.8 PF, 3 Phase, 4 wire complete with canopy and silence proof system mounted on common base plate with flexible coupling meeting with the requirements of latest BS/IS and complete all as specified and directed. Prime Mover:- Prime mover suitable for driving alternator 62.5KVA capacity having the suitable BHP at 1500 RPM for rated output for alternator in accordance with latest BS/IS specification with electric starting device with all standard fittings and 1 Nos batteries of 12 Volts, 150AH with battery charger (Make;- Exide/Amaron/HBL). Engine over speed safety mechanism shall be incorporated. The engine shall be equipped with standard fittings as per manufacture's recommendation. Engine Instruments Panel:- All relevant parameters shall be conventionally displayed on complete panel thereby providing easy monitoring of lubricant oil, pressure, coolant temperature, battery charging, Ammeter RPM, Hour metre and starting switch etc. Fuel Tank:- New fuel tank of 12 hours capacity will be installed as per the manufacturer's requirement including all necessary pipe connection from fuel tank to engine and over from engine to tank. Note:- (i) The engine and alternator shall be factory assembled in case of M/S Greaves cotton, division factory premises and in case of M/S Cummins India at authorized GOEM for the Northern Region is M/S Sudhir Gen Sets. (ii) Net cut out should be 62.5 KVA after considering due derating factor.
Sub Class 'B' brick old size. as cable cover, laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and as directed.
LED road lightening with high power LED street light luminare of capacity 45 Watt with deep drawn housing with acrylic cover complete all as specified and as directed. Make:- HPL model No. HPLLEDSL6060S or equivalent in specified makes.
Supply and fixing junction box of size 200x150x75mm made of MS sheet 1.6mm thick, front door openable with fixing screw, painting with two coats of synthetic enamel paint over a coat of red oxide primer including aluminium bus bar 2 Nos of size 20x3mm mounted on epoxy based post insulators and drilled holes for connection all as required and fixed to poles using MS flat of size 20x3mm and nuts & bolts of required size including MCB 10 Amp single pole complete all as specified and as directed.
Lamp holder PVC polycarbonate type with back plate suitable for batten fitting with LED bulb 5 watt complete all as specified and as directed.
Sleek LED mirror light fitting 5 Watt with diffuser, connector block complete with all accessories internally prewired and including connecting up with suitable size twin core twisted flexible copper conductor cable complete all as specified and as directed. Make:- CG Cat part No. LCL-05-CDL or equivalent in Havells/Wipro/Bajaj
18W LED tube (4ft) having minimum 1850 lumens with extruded engineering plastic housing, polycarbonate diffuser, G-13 polycarbonate end cove. The LED with 120 degree view angle> 102 lumen/watt, lumen maintenance>70% at 50,000Hrs, colour temperature of 5000-6500K,> 70 colour rendering. The driver must be integral APFC and constant type having THD<20% and power factor>0.9 with reverse polarity protection and open circuit protection with batten fitting complete all as specified and as directed. Make:- Surya/CG/Bajaj/C&S/HPL
Exhaust fan 400mm sweep heavy duty single phase, 220V, 50Hz complete all as specified and as directed.
Exhaust fan 300mm sweep heavy duty single phase, 220V, 50Hz complete all as specified and as directed.
MCB triple pole and neutral 63 Amp 415 volts complete all as specified and as directed.
MCB single pole any rating from 5 to 40Amp 240 volts with rupturing capacity 10KA including providing thimble for outgoing cable complete all as specified and as directed.
MCB single pole and neutral 40Amp 240 volts with rupturing capacity 10KA including providing thimble for outgoing cable complete all as specified and as directed.
New generation energy saving and environment friendly long life versatile pressure Die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and exclusively designed polycarbonate cover along with electronic driver of 25W LED 5000-6500K colour temperature LM80 test compliance and making necessary connections with1.5sqmm PVC insulated copper conductor twin core cable 1100volt upto 1 mtr length complete all as specified and as directed. Make:- Havells/C&S/Bajaj/Philips/CG
Security light bracket made out of 32mm dia medium grade GI pipe, bent to shape 1.2 mtr long duly painted with two coats of aluminium paint over a coat of primer including MS clamps and back plates fabricated from steel section including nuts, bolts, washers 02 set suitable for fixing on building complete all as specified and as directed.
Earthing complete with galvanised steel earth plate electrode of size 600mmx600mmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the earth plate not less than 1.5m below ground level connected to and including GI wire 4mm dia as earthing lead by means of galvanised iron or steel nuts, bolts, washers all as directed including providing earth wire protection pipe GI light grade 15mm dia from earth plate to main switch board/panel, watering pipe 20mm bore medium grade with wire mesh and funnel at top, earth pit in PCC 1:3:6 type C1, angle iron 25x25x3mm frame work with precast RCC 1:2:4 type B1 cover reinforced with 8 mm dia TMT bars @ 150mm c/c both ways with 12mm dia MS handles, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil, removing surplus excavated soil to a distance not exc 50m complete all as shown in electrical plate No. 3 of MES schedule Part-I all as specified including testing on completion.
Earthing complete with galvanised mild steel pipe electrode, 40mm bore, medium grade, 2.5 metres length burried directlyand preferably vertically in ground with top edge not less than 1.25 metres below normal ground level connected with earhing lead of galvanised iron strip 32x6mm by means of galavanised iron or steel nuts, bolts, check nuts and washers PCC 1:3:6 type C-1 in pit, angle iron 25x25x3mm frame work with precast RCC1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12 mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mesh at top and light grade GI protection pipe 40mm bore upto 5m length for drawing in earth lead strip, adequate quantity of charcoal dust and salt alround the earth plate including excavation and earth work in any type of soil, removal of surplus spoil to a distance not exc. 50m complete all as shown in electrical plate No. 2 of MES Schedule Part-I and including testing on completion all as specified.
25mm bore rigid non-metalic, medium grade PVC conduit, ISI marked, concealed type for routing wire for TV/telephone complete with bends, tees, reducers etc and fixing accessories complete all as specified and as directed.
TV socket outlet complete with suitable size CI/MS sunk box in recess covered with and including 3mm thick plastic laminated top sheet cover including connection etc complete all as specified and as directed.
Telephone socket outlet complete with suitable size CI/MS sunk box in recess covered with and including 3mm thick plastic laminated top sheet cover including connection etc complete all as specified and as directed.
Modular socket 16 Amp 6 pin 3 module complete all as specified and as directed.
Point wiring with 1.5 sqmm PVC insulated FRLSH unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in, concealed type, drawing in existing conduit and sunken box (for mounting switches, sockets, regulators etc,) complete all as specified and directed. Note:- Modular plate for mounting switch, socket fan regulator shall be measured and paid separately under relevant item Internal Electrification Schedule.
All as per Item No. 42.00 above but point wiring one "light point controlled by two 2 way switches complete all as specified and as directed.
All as per Item No. 42.00 above but point wiring for one 3 pin socket out let, 5 amp independent complete all as specified and as directed.
All as per Item No. 42.00 above but with 2.5Sqmm copper conductor single core cable (multistrand) PVC Insulated FRLS (unsheathed) and PVC Insulated unsheathed 1.5Sqmm copper conductor cable as earth wire for one 5 pin 15 Amps switch socket outlet independent complete all as specified and as directed.
Deduction to be made from BOQ for Sch 'A' Part -II (Schedule of credit) Amount of Rs. 77830.00 during AOC. Note: Tenderers shall not quote for this schedule.
JINDAL BUILDERS (BID ID -3387984)
K S BUILDERS (BID ID -3386850)
M/S GURU DEV BUILDERS (BID ID -3386843)
VISHWA MITTAR PACHYALA (BID ID -3386834)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .