COMPREHENSIVE REPAIR INCLUDING PERIODICAL, JOINERY , E/M AND OTHER MISC WORKS IN OLD MD ACCN AT QUEENS ROAD UNDER ZONE III AREA AT JAIPUR MIL STN

Amount

M&L for preparation of old decorated surfaces of wall (plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke, soot moulds and efflorescent salt and trading oil or greasy spots by brush,sand paper /mechanical means, surface to be repaired if required by filling wall care putty in holes /depressions etc to obtain uniform surface and applying two coat of cement base paint all as specified and directed. Note :- 1. Rates are inclusive for scaffolding arrangement, trestles, ladders etc for working upto four storey all as specified and directed. 2. All colour shall be factory made and no pigment to be used to make the desired shade at site.

M& L for preparation of old surfaces of wall and applying one coats of weather proof paint (exterior acrylic emulsion Paint )using hand roller over one coat of water based white pigment alkali resistant priming paint on facia, cornices, chajjas and balcony etc includding all necessary arrangement such as scaffolding / working platform for execution of work upto four storey building etc by skilled labour complete all as specified and directed. Note :- 1. Rates are inclusive for scaffolding arrangement, trestles, ladders etc for working upto four storey all as specified and directed. 2. All colour shall be factory made and no pigment to be used to make the desired shade at site. Make:- Apex shine of Asian Paint or anti dust of Berger or mica marble of nerolac or equivalent make as appoved by GE.

M& L for writing letters or figures (Block Roman, Italic or Indian) n.exc. 30 cm high by using of synthetic enamel paint including white enamal paint on base etc complete all as specified and directed.

M&L for preparation of old decorated surface by of wall (plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke, soot moulds and efflorescent salt and trading oil or greasy spots,surface to be repaired if required by filling putty in holes/depressions to obtain uniform surface and applying one coat of white wash including scaffolding arrangement, trestles, ladders etc for working upto four storey all as specified and directed.

All as per Item No. 1 but two coat of white wash on wall complete all as specified and directed.

All as per Item No. 1 but one coat of white wash on ceiling complete all as specified and directed.

All as per Item No. 1 but two coat of white wash on ceiling complete all as specified and directed.

All as per Item No. 1 but one coat of distemper oil emulsion on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper on walls including one coat of alkali resistant wall primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces and and applying two coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment of wall including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces,surface to be repaired if required by filling wall care putty in holes/depressions to obtain uniform surface and applying two coats of oil bound distemper of approved tint over one coat alkali resistant wall primer complete .

M&L for preparing of old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synethic enamel paint on wooden surfaces complete all as specified and directed.

AII as per serial Item No 13 above but one coat of synthetic enamel paint on steel surface complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) n. exe 1.50 SQM each complete all as specified and directed.

-ditto- all as per item No 15 above but exe 1.50 SQM but n .exe 4.00 SQM each.

Taking down shutters of any description exe 1.00 SQM but n.exc 2.00 Sqm each as directed.

- Ditto – all as per item No 17 above but exe 2.0 SQM each.

M&L for pressed steel frames for door with one or more rebates including necessary fixing lugs hinges locks strike plates etc size of frame 125 x 60mm complete all as specified and directed.

M&L for pressed steel frames for door with one Or more rebates including necessary fixing lugs hinges locks strike plates size of frame 105x 60mm complete all as specified and directed.

M& L for PCC 1:3:6 type using 20 mm graded stone aggregates C1 as in filling of steel chowkhats complete all as specified .

S&F 2nd class hard wood factory made plain framed panelled shutters 35 mm thick (any number of pannel) with panels of timber flats on both sides (feather edged) or of veneered particle board medium density , wood particle board with commercial face veneers complete all as specified and directed.

S&F 2nd class hard wood 35 MM thick glazed and skeleton shutters open rebated and prepared to revive glass ,gauze etc (with out sash bars) edges for framing plain chanferred or rounded fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR part-I clause 8.24 (a) for doors completed as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F factory made solid pannel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for , top and bottom rails , mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed togther with solvent cement , complete all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminimum anodised door/window shutter openale / sliding type with aluminimum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws handle tower bolt etc complete all as specified and directed.

S&F factory made steel windows with side hung shutter including projecting type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded including taking down of existing steel windows complete all as specified and directed.

S&F factory made steel ventilators with top hung shelters incl hinge with steel handle and steel peg stay complete all as specified. Including taking down existing steel ventilators.

S&F MS framed work such as grills , gratings guard bars etc with ends of bars shouldred or riveted or forged into spikes and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

S&F 100 mm size MS butt hinges, medium weight all as specified.

S&F 300 mm long MS sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts fitted complete all as specified and directed.

S&F mild steel barrel tower bolt stove enamelled black with bright bolt 150 mm long complete all as specified and directed.

S&F mild steel pressed handle ovel type stove enamelled black with bright bolt 125 mm long complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire with average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples fixed etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F mild steel spring 300 mm long , ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden /angle iron chowkat complete all as specified and directed.

S&F aluminimum, anodised, barrel tower bolt 150 mm long complete all as specified and directed.

S&F 300 mm long aluminium, anodised sliding door bolt with hasp, and staple bolt type and fixing clips of sheet , cast or extruded sections complete all as specified and directed.

S&F aluminium , anodised bow handle 125 mm long complete all as specified and directed.

S&F 4.00 mm thick sheet glass of ordinary quality and glazing with oil putty in square or fixed with beads in squares nexe 0.50 SQM in each pane complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches , pillers etc all as specified and directed

M&L for brick work with sub class ' B ' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down cement lime or cement plaster on brick or stone walls including raking out joints hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on wall of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L rendering 5 mm thick in cm 1:3 on ceiling of concrete / brick surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F in repair pressed steel cup board shutters with frame , the frame shall be made of 1.25 mm thick and shutter made of 1.00 mm thick PBI sheet with 6 Nos 100 mm long steel hinges , Godrej pattern locking arrangement including 12mm dia vertical rod all as per TD drg No CEJZ /TD 2004/29 . The surfaces shall be spary painted with two coat of synthetic enamel paint over a coat of zinc chromate primer over cleared surface complete all as specified and directed and shown on drawing. Note :- The total width including frame shall be measured flat and shall be paid accordingly.

Dismantling , floor hearth or wall tiling including CM bedding (but not backing ) removing seviceable tiles to store & rubbish off the premises complete all as sepecified.

S&F 350 x 450 x 6 to 7 mm thick coloured ceramic tiles 1st quality) as on vertical surface set & jointed in neat cement slurry and pointed in white / coloured cement to match the tiles over and including 10mm thick plaster in CM (1:6) complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of Each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over and including 15 mm thick screed bed in CM(1:4) complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over and including 15 mm thick screed bed in CM(1:4) complete all as specified and directed.

M&L machine cut Kota stone slab flooring 20-25 mm thick over and including cement screed bed 15 mm thick in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of flooring including rubbing and mirror polishing complete all as specified

S&F 4.00 mm thick frosted glass of ordinary quality and glazing in square n. Exc 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality , description) from metal /wood frame including punching or drilling out old glass panes, pins, springs clips & S&F 3.00 mm thick sheet glass of ordinary quality and glazing in square complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality , description) from metal / wood frame including punching or drilling out old glass panes, pins, springs clips & S&F 3.00 mm thick frosted glass of ordinary quality and glazing in square complete all as specified and directed.

Demolition of cement concrete in ground floor n. exc 15 cm thickness below or above the ground level.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 500 litres capacity including dismantling of old water tank complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 1000 litres Capacity including Dismantling of old water tank

S&F in repair Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair Ball brass valves 25mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs chromium plated fancy type Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore including taking up or down old steel tubing & connections complete all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore including taking up or down old steel tubing & connections complete all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 25mm bore including taking up or down old steel tubing & connections complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs Vitreous China squatting pan 'orissa ' pattern `, size 580mmX 440 mm white ,with integral foot rests,(excluding flushing cistern & flush pipe) including connection to trap and to flush pipe etc including provn of lime concrete bedding complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed.

S&F in repair CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe (min. weight 40gms)

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (min. weight 40gms)

S&F in repair mild steel spring hinges 300 mm long , ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden /angle iron chowkat complete all as specified and directed.

S&F in repair 100 mm size MS butt hinges, medium weight all as specified.

S&F in repair 300 mm long MS sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts fitted complete all as specified and directed .

S&F in repair mild steel barrel tower bolt stove enamelled black with bright bolt 150 mm long all as specified.

S&F in repair mild steel pressed handle ovel type stove enamelled black with bright bolt 125 mm long all as specified.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire with average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples fixed etc complete all as specified and directed.

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 litre capacity complete all as specified and directed.

S&F in repair Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair PVC Waste Pipe 32 mm bore for WHB

S&F in repairs angle stop cock 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions fancy type chromium plated complete all as specified and directed.

M&L for welding in repairs. exc 2.5cm but n.exc 5 cm in length and thickness of metal to be welded exc 6 mm but n.exc 9 mm complete all as specified and directed.

M&L for running welding in repairs thickness of metal to be welded n.exc 6 mm thick

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with and including WPC @ 3% weight of cement or as per manufacturer instruction complete all as specified and directed.

M&L for carring out water proof treatment to RCC Roof as under :- 1. Complete removal of the existing roof treatment and disposed of the rubbish outside MOD land. 2. All visible cracks to be opened up in V shape and remove all loose particles, cleaned properly with wire brushes and cracks are to be filled with crack filling compound for cracks upto 15 mm width/depth of cracks. 3.Applying high build elastomeric water proofing coating based on alphabetic polyeurethane,cold applied of spray/brush applied ,membrane with an elongation of 350%and crack bridging ability of 2mm as per ASTM D 412.The system including final base preparation ,single coat of single component PU based primer and applying Berger HS Elastoseal or equivalent brand of other manufacture in two coats to achievea min thickness 1.2mm ,complete as per manufacturer specification. 5. Necessary guarantee of 05 years shall be submitted by the contractor.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in roof kerbs rounded or chamfered on edges complete all as specified and directed.

M&L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete / plaster on damaged surface and applying 30 mm thick polymer modified mortar to RCC member in C:M 1:3 including mixing of polymer latex additive for repair (chajjas fins,border etc ) (i) qty of ploymer to be used 15% weight of the cement or as per manufacturer instruction (ii)Use of electrical mixer to get the homogeneous dough on bond coat surfaces (iii) To achieve required thickness repeat this step after 24 hrs as required (iv) keep the surface moist using water fog for 5 to 7 days etc complete all as specified and directed (v) Rate shall be inclusive of all necessary scaffolding for building height (G+1) storey complete all as specified and directed. Make : (i) Epoxy bonding agent shall be Krishna,Dr Fixit / MC Bauchemie / M/s ceimistic / SIKA or equivalent as approved by GE. (ii) Polymer latex additive shall be of Sika / Fosroc / Dr Fixit or equivalent as approved by GE.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works.

S&F for mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

-ditto- all as per item 96.00 above but 6mm to 8mm dia.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. Note : The work shall be executed upto 2nd floor. The quoted rate shall deemed to be included this aspect.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Nominal mix cement concrete 1 : 1.5 : 3 using 12.5 mm graded stone aggregate as in chajjas complete all as specified and directed. Note : The work shall be executed upto 2nd floor. The quoted rate shall deemed to be included this aspect.

M & L for drilling holes in RCC 14mm dia 50 to 100 mm deep holes in structural members at the intervals of 150 mm in staggered manner all as directed including cleaning the holes by air blowers prior to fixing TMT bar 10 mm dia (quoted rate include the cost of TMT bar) in cleaned holes . TMT bar to be fixed by mean of epoxy to ensure complete sealing and cure the system for min 12 hrs under supervision of qualified supervisor complete all as specified and directed.

Demolition and cleaning of sunken portion and M & L for WPT in sunken floors as described here under:- (i) The sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150ml per bag of cement. (ii) Preparing plastered surfaces and providing APP polymetric water proofing membrane, minimum 3 mm thick and weighing not less than 3.0 kg/sqm of make super thermolay manufactured by STP ltd or hyper plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplus' (Polyster) manufactued by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, woth a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate of M/S Texas Continue...

Continue... India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch with a Over lap of 75 mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsin bitumiouns primer all as per manufacture instrctions including prepartion of surface and filling lime concrete 1:5:10 type E2 with brick bats complete all as specified an as directed. Note:- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The Waterproofing treatment shall be got crried out by the manufacturer or their authorised applicatiors (iii) Above aspects are deemed to be included in quoted rate (iv) Water proofing liquid shall be included in the quoted rate. (v) Slab area only will be measured for payment purpose.

Taking down carefully aluminum or copper point wiring with pvc casing or conduit (light, fan, bell,socket or power) complete including all fixiture and fittings such as switches, ceiling roses, regulator, sockets, lamp holder, light fittings tube light fitting, bell/ buzzer ,regulator etc (excluding fans) and making good disturbed surfaces of wall floors, ceiling etc complete all as specified and as directed. Note : Serviceable tube light fitting will be re-used as refixing under respective item of the schedule.

Taking down and dismantling ceiling fan including accessories of any type or make safely and refixing after minor repair like oiling greasing and painted with synthetic enamel paint of in white / off white, including writing MES Nos. complete all as specified and directed.

Taking down and dismantling exhaust fan including accessories of any type or make safely and refixing after minor repair like oiling greasing and painted with synthetic enamel paint of in white / off white, including writing MES Nos complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable and earth continuity conductor 1.5 sqmm copper conductor FRLS cable inclosed in and including 20 mm conduit concealed medium grade with all accessories ISI marked, and terminated in modular metal flush boxes for mounting fitting like switches, sockets fan regulators as required for one light point controlled by one switch. Note : The cost of modular metal metal flush box & modular cover plate with frame and size as required at site and cutting chases and finishing using CM 1:3 shall deemed to be included in quoted rate.

All as per item No. 107.00 here -in- before but One fan point controlled by one, one way switch.

All as per item No. 107.00 here -in- before but One exhaust fan point controlled by one, one way switch.

All as per item No. 107.00 here -in- before but One 3 pin 6 Amp socket outlet on independent board with other switches.

All as per item No. 107.00 here -in- before but One bell point controlled by on bell push button.

M&L point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 4.0 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 4.0 sqmm (Green) drawn into and incl.concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia medium grade ISI marked invory colour with all conduit fittings connected accessories and terminated in modular metal flush boxes with modular white cover plate with frame for the fixing one socket point 16 amps controlled by one switch on independent board. Note : The cost of modular metal metal flush box & modular cover plate with frame and size as required at site and cutting chases and finishing using CM 1:3 shall deemed to be included in quoted rate.

M&L Point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green) drawn into and incl.PVC casing capping medium grade of size not less than 20mm ISI marked invory colour with all fittings and connected accessories and terminated in modular metal flush boxes with modular white cover plate with frame for mounting fitting like switches, sockets fan regulators as required for one light point controlled by one switch. Note :- The cost of modular metal metal flush box & modular cover plate with frame and size as required at site and deemed to be included in quoted rate.

All as per item No.109.00 here -in- before but One fan point controlled by one, one way switch.

All as per item No.109.00 here -in- before but One exhaust fan point controlled by one, one way switch.

All as per item No.109.00 here -in- before but One 3 pin 6 Amp socket outlet on independent board with other switches.

All as per item No.109.00 here -in- before but One bell point controlled by on bell push button.

S&F switch, piano type Single pole, one way 6 Amp complete.

S&F Socket outlet , piano type 2-in -1,3 pin 6 Amps complete.

S&F switch, piano type Single pole, one way 16 Amp complete.

S&F Socket outlet , piano type 2-in -1,3 pin 6/16 Amps complete.

M&L point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 4.0 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 4.0 sqmm (Green) drawn into and incl. PVC casing caping medium grade of size not less than 25 mm dia medium grade ISI marked invory colour with all fittings and connected accessories and terminated in modular metal flush boxes with modular white cover plate with frame for the fixing one socket point 16 amps controlled by one switch on independent board. Note :- The cost of modular metal metal flush box & modular cover plate with frame and size as required at site and deemed to be included in quoted rate.

M&L point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm (Phase-Red, Neutral - Black and Earth continuity conductor 1.5 sqmm - Green) drawn into and including rigid non metallic PVC casing capping medium grade ISI marked invory colour with all conduit fittings and connected accessories and terminated in modular sunken boxes for mounting switches, sockets as required for one socket outlet 6 Amp controlled by one switch on the same board with other switch.

M&L point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm (Phase-Red, Neutral - black and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit 20 mm medium grade ISI marked invory colour with all conduit fittings and connected accessories and terminated in modular sunken boxes for mounting fitting like switches, sockets as required for one socket outlet 6 Amp controlled by one switch on the same board with other switch.

S&F Lamp holder insulated body PVC / Poly carbonate type with back plate for batten fitting complete all as specified and directed.

S&F switch modular 1 way,6 amp, 1 module complete all as specified and directed.

S&F socket modular socket outlet 6 amp, 2/3 pin combined ,2 module complete all as specified and directed.

S&F switch modular 1 way,16 amp, 1 module complete all as specified and directed.

S&F socket modular 6 / 16 amp, 2/3 pin combined ,2 module complete all as specified and directed.

S&F modular fan regulator 120 watts ,2 module complete all as specified and directed.

S&F modular bell push 6 amp 1 module complete all as specified and directed.

S&F electric bell multi-music type AC 230 volts single pole complete all as specified and directed.

M&L Ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and directed.

M & L in replacemnt of sub main wiring with two run of single core 6.0 Sqmm PVC insulated FRLS unsheathed cable multi-stranded copper conductor drawn through and including PVC conduit 25 mm medium grade concealed with all fittings and fixing accessories on roof, walls, ceiling etc. including one run of single core 6.0 Sqmm PVC insulated FRLS unsheathed multistranded copper conductor earth wire complete all as specified and directed. Note: Two run of 6 sqmm and one run of 6 sqmm earth wire including PVC conduit shall be measured & paid as one unit length)

M&L in replacemnt of sub main wiring with 4 run of single core 6.0 Sqmm PVC insulated FRLS unsheathed cable multi-stranded copper conductor drawn through and including PVC conduit not less than 25 mm medium grade concealed with all fittings and fixing accessories on roof, walls, ceiling etc. including two run of single core 6.0 Sqmm PVC insulated unsheathed multistranded copper conductor earth wire complete all as specified and directed. Note: 4 run of 6 sqmm and two run of 6 sqmm earth wire including PVC conduit shall be measured & paid as one unit length)

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one single pole MCB of 20 Amp 240 V complete all as specified and directed.

S&F in repair factory made, sheet distribution boards, TPN 4 ways, 415 V,double door protection class IP-43 IK-09 with reversible double door type suitable for mounting MCB/ MCCB, with minimum 200 amps rated copper bus bar complete all as specified and directed.

S&F in repair factory made, sheet distribution boards,SPN 8 way double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to with minimum 200 amps, copper bus bar complete all as specified and directed.

S&F in repair factory made, sheet distribution boards,SPN 12way double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, with minimum 200 amps, copper bus bar complete all as specified and directed.

S&F in repair MCB SP 6 to 32 amp, 10 KA,'C' curve ,240V confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

S&F in repair MCB SPN 40 amp, 10 KA,'C' curve 240V,confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

S&F in repair MCB TPN 63 amp, 10 KA,'C' curve 415 V confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

S&F in repair LED fixtures 20 watt with extruded polycarbonate environmental friendly,slim design with decorative and caps high performance diffuser for soft glare free light,minimum lumen output 1900 lm with efficiency 110 lm/w driver with high voltage protection upto 380V AC& surge protection upto 2.5 KV,CCT(K)-6500,LM 80 tested high brightness LED technology complete all as specified and directed. Make:- Wipro Cat No -D532065 / Havells cat part No.LHEXAWP7IN1W020 or equivelent model in Bajaj/Crompton/ Philips as approved by GE.

S&F in repair LED (0.6m) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal lumen output of 1000 lumens at a minimum system efficiency of 100 lumen/w and total power consumption not more than 10 watt including driver complete all as specified and directed.

S&F LED 25 watts street light smartbrite aluminium PDC housing with IK-07 protection PC glossy diffuser duly prewired connection having a nominal system lumen output of efficiency 100 lumens / watts light watt and total power consumption not more than 25 watt including driver.it has a rated IP 66 with 5 KV inbuilt surge protection complete all as specified and directed.

S&F 10 watt LED T-lamp B-22 (warm white / golden yellow)1000 lumens complete all as specified and directed. Make: Philips cat part No. 9200018611 or equivalent model in Havells / Bajaj as approved by GE.

S&F PVC fresh fan 250mm sweep 230 V with louvers fan motor and accessories complete including making connection complete all as specified and directed. Make: Crompton/Havells/Khaitan

S&F LED 600x600mm,35/36 watt,220 volt,AC recessed type with efficiency PMMA diffuser soft glare free light complete with driver ,holders and LED lamps suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F fancy lights 12 watt fixed on walls complete 230 volts operated all as specified and directed.

S&F garden lights 12 watt fixed on pipe complete 230 volts operated all as specified and directed.

Refixing only serviceable tube light fitting as obtain from item, No.104 complete with all accessories internally pre-wired and inculding connection up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

S&F PVC Recatangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mmx100mm and 50 mm deep complete all as specified and directed.

S&F PVC Recatangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 175mmx100mm and 50 mm deep complete all as specified and directed.

S&F PVC Recatangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200mmx150mm and 50 mm deep complete all as specified and directed.

S&F PVC Recatangular block for mounting switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250mmx200mm and 50 mm deep complete all as specified and directed.

MSR INFRATECH (BID ID -3288814)

M/S Chandra Mohan Bansal (BID ID -3288612)

J.J.ENGINEERING (BID ID -3288789)

ANKIT BUILDERS (BID ID -3285417)

M/s KAKSI ENTERPRISES (BID ID -3287460)