138WE/L-142/2025-26

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thick (below or above ground level) and removing debris off the premises complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in any description and any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing), and removing rubbish off the premises, complete all as specified and/or as directed by Engr-in-Charge.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and/or as directed by Engr-in-Charge.

Dismantlng unframed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc. under 40 Sqcm in section.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars etc. complete all as specified and/or as directed by Engr-in-Charge.

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc.) complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc.) complete all as specified and/or as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and/or as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge or thickness including nainital or similar pattern complete all as specified and/or as directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/ boarding complete all as specified and/or as directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, complete all as specified and/or as directed by Engr-in-Charge.

M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work in wall panelling, complete all as specified and/or as directed by Engr-in-Charge.

M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work in ceiling panelling, complete all as specified and/or as directed by Engr-in-Charge.

M&L french polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and/or as directed by Engr-in-Charge.

M&L Prelaminated particle board,18/19 mm thick, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and/or as directed by Engr-in-Charge.

S&F piano/ continuous hinge of size 40 mm (when open) stainless steel complete all as specified and/or as directed by Engr-in-Charge.

S&F 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and/or as directed by Engr-in-Charge.

S&F auto closing hinges 35 mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for cabinet shutters complete in all respect and fixed in position complete all as specified and/or as directed by Engr-in-Charge. Make : KAFF/Hettich or equivalent approved make as approved by GE.

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position complete all as specified and/or as directed by Engr-in-Charge. Make : Harrison (Cat Part No 0812) or equivalent approved make as approved by GE.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent approved make as approved by GE.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. Make : Hettitch or equivalent approved make as approved by GE.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent approved make as approved by GE.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and not exc 25 sqcm in section including dismantling, complete all as specified and/or as directed by the Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in beading for edges of ceiling, lining or wooden flooring work fixed with nails exc 6 sqcm and not exc 13 sqcm in section including dismantling complete all as specified and/or as directed by the Engr-in-Charge.

M&L for covered fillets of standard hard board 6mm thick and up to 40mm wide and fixing with screws complete all as specified and/or as directed by the Engr-in-Charge.

Dismantling boarding / wooden flooring of any description, fixed in any positon, with nails.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated, including backing with thermocol sheets, over 6 micron polythylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified by manufacture all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 40mm graded aggregate as plinth protection finished even and smooth without using extra cement, complete all as specified and/or as directed by the Engr-in-Charge.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and/or as directed by the Engr-in-Charge.

M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in mass concrete and filling in foundation, complete all as specified and/or as directed by the Engr-in-Charge.

M&L precast solid blcoks in cement concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in block masonry, exc.10cm in width and set in cement mortar 1:6, complete all as specified and/or as directed by Engr-in-Charge.

M&L for 5 mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1: 3 complete all as specified and/or as directed by the Engr-in-Charge.

M&L for 10mm thick rendering on fair faces of block masonary wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and/or as directed by the Engr-in-Charge.

M&L for cement plastering 15mm thick in two layers in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound. Make : Pidilite/Sika or equivalent approved make.

M&L for preperation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and/or directed by Engr-in-Charge.

M&L preparation of newly plaster surfaces of wall and applying two coats of distemper oil emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to new surfaces, over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/one coat as recommended for under coat by manufacturer by using following brands of emulsion and primer complete all as specified and/or directed by Engr-in-Charge. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Oil Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

M&L preparation of newly plaster surfaces and applying two coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to new surface of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc. surfaces over a coat of wall putty thickness vary from 1 to 1.5 mm over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion, complete all as specified and/or directed by Engr-in-Charge. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].

M&L for complete removal of existing treatment and preparation of old external wall surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc. and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to surfaces over a coat of wall putty thickness vary from 1 to 1.5 mm over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer, complete all as specified and/or directed by Engr-in-Charge. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].

M&L for preperation of new concrete/ plastered surface of ceiling and applying three coats of white wash complete all as specified and/or directed by Engr-in-Charge.

M&L for preperation of old plastered ceiling surface of any description and applying one coat of white wash complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) powder coated aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) powder coated aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (3 Nos) suitable handle (1 No) etc., complete all as specified and directed.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed by Engr-in-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and/or as directed by the Engr-in-Charge.

Material & labour PCC 1:3:6, type C1, (using 20 mm graded stone aggregate) as in hold fast, bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supply and fixed to chowkhats, complete all as specified and/or as directed by the Engr-in-Charge.

S&F 2nd class hard wood 35 mm thick Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and/or as directed by the Engr-in-Charge.

S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and/or as directed by the Engr-in-Charge.

S&F for 40 mm thick Flush shutters Ladakh pattern, solid core construction, with block board core and plywood face panels commercial type on both sides, Supply and fixed to chowkats, complete all as specified and/or as directed by the Engr-in-Charge.

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ccomplete all as specified and/or as directed by the Engr-in-Charge.

M&L sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and/or as directed by the Engr-in-Charge.

M&L sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and/or as directed by the Engr-in-Charge.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and/or as directed by the Engr-in-Charge.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and/or as directed by the Engr-in-Charge.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and/or as directed by the Engr-in-Charge.

S&F aluminium (Die cast) body door closer hydraulically dessignation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg all as specified and directed

S&F floor door stopper (Length of cover plate) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

S&F100mm long mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in sub base of floor complete all as directed by Engr-in-charge.

M&L for Non - skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and/or as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat complete all as specified and/or as directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc. laid bedded and pointed in any mortar, complete all as specifed and directed.

M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting, etc and screed bed with CM (1:4) 20mm thick laying floor tiles complete all as specified and as directed.

Dismantling water tank exc 250 & n exc 500 litre and removing from site all as specified.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, all as specified.

S&F in repair 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule .

S&F in repair 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair.

S&F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

Taking up or down 25 mm bore steel tubing and connections and set aside for re-use or removal to store.

Taking up or down 32 mm bore steel tubing and connections and set aside for re-use or removal to store.

S&F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacturers instructions and as directed by Engineer in Charge.

S&F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge.

S&F one piece vitreous china wash down water closet (Pedestal pattern) size 710 x 390 x 790 mm, white with soft close seat cover and twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (02 Nos) with flange etc. complete all as specified and/or as directed by Engr-in-Charge. Make : Cat Part No CRUISER S1013137S Trap 300mm of Cera or equivalent approved make as approved by GE.

S&F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including plastic seat of same colour of WC, closed patttern with flat bottom, and cover and mild steel chromium plated hinging device complete.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc. as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Jaquar/ Hindware/ Cera.

S&F in repair fancy type 15 mm bore angle valves, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unions.

S&F PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed.

S&F in repair Vitreous China wash basin fancy type pedestal pattern, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.

S&F in in repairs 15mm bore CP wash basin mixer for mixing hot & Cold water copper alloy fancy type high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F CP toilet jet spary ABS with double lock 1.2 mtr CP tube stainless steel flexible hose all as specified and as directed.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F sheet glass basin shelf assembly consisting of 8mm thick glass shelf 600 x 150mm wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible waste pipe for sinks / wash hand basins, complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F 40mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams)

S&F 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams)

M&L for Cement concrete 1:4:8, type D-2, (40mm graded stone aggreate) 75 mm thick as in sub -floors, sub- bases, floors and pavings,etc.

M&L for chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments and laid over & including 20mm thick cement screed base in cement mortar (1:6) complete all as specified and/or as directed by the Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed by Engr-in-Charge.

S&F MS Rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors; fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S &F pre-painted galvanume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering /clading to walls fixed with self tapping screws complete all as specified and directed.

Demolition of reinforcement cement concrete in any description and any position not otherwise specifically provided for.

M&L for reinforced cement concrete (Nominal Mix) 1:2:4, type B1 (20mm graded aggregate) as in slabs supported of walls, beams and columns in floors, roofs, landings, balconices, canopies, deck slabs and in shelves etc. complete all as specified and as directed

M&L for precast cement concrete 1:2:4, type B1, (20mm graded stone aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and as directed.

M &L for form work to soffits of suspended slabs flat type such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or slopping) etc. complete all as specified and as directed

M&L form work to rough finshed edges of concrete flats, treads, breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but not exc. 20 cm wide, complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality, complete all as specified and directed.

S&F in repair 19mm dia mild steel, chromium plated curtain rods, fancy type, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

S&F in repair chromium plated soap dish any type fixed to plugs with brass screws, complete all as specified and directed.

S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

S&F in repairs Towel hanger with 6 Nos of pin and 600mm long chromium plated etc. complete fitted as per sepcified and directed by Engr-in-charge

M&L PVC (SWR) 75 mm dia floor trap with plain with grating including jointing with solvent cement complete all as specified and directed.

S&F grating doom 75mm dia of PTMT (min weight 25gms) complete as specified and directed.

Taking down eaves gutters and rainwater pipes (75 mm / 110 mm bore), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories).

M&L for PVC (SWR) pipe single socketed, 110mm dia soil, waste and rain water dranage pipes laid in trenches and jointed all as specified including dismantling complete as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75 mm dia (SWR) bend any radius complete all as specified and directed.

S&F PVC (SWR) vent cowl of 75mm bore complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (40mm gradded stone aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 100mm dia pipe including dismantling.

S&F PVC (HDPE) SWR 75 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacturers instructions, laid in trenches or in floor complete all as specified and directed by Engr-in-Charge.

M&L for PVC (SWR) pipe single socketed, 75mm dia soil, waste and rain water dranage pipes fixed to walls all as specified including dismantling complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) including complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface complete all as specified and directed.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the following:-

One light/exhaust fan point controlled by one way switch.

One light point controlled by two way switch.

One switch socket outlet 6 Amps, 230 volts point on Same board.

One switch socket outlet 6 Amps, 230 volts point on independent board.

All as item No 127 above, but using cables 4 Sq mm size.

Supply and fix switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed.

Supply and fix switch piano flush button single pole 16 Amps 230 volts two way complete all as specified and directed .

Supply and fix Bell push, flush type, 5 amp, 230 volts one way complete all as specified and directed.

Supply and fix socket outlet two in one 5 pin 6 Amps flush type 230 volts complete all as specified and directed.

Supply and fix switch Socket combination outlet multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all pecified and directed.

S&F Buzzer, Ding Dong AC.230 Volts, single pole complete all as specified and directed.

Supply and fix Ceiling rose, surface Bakelite three terminals complete all as specified and directed..

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Way complete all as specified and directed .

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Way complete all as specified and directed .

Supply and fix MCB TPN 100 Amp 415 Volts, 50 Hz AC, 'C' series complete all as specified and directed .

Supply and fix MCB TP 63 Amp 415 Volts, 50 Hz AC, 'C' series complete all as specified and directed .

Supply and fix MCB SPN 63 Amp 240 Volts, 50 Hz AC, 'C' series complete all as specified and directed.

Supply and fix MCB SP 6-32 Amps. 240 Volts 50 Hz AC, 'C' series complete all as specified and directed.

M&L for submain wiring in replacement along with earth wire FRLSH insulated copper conductor, single core cable in surface/recessed as required in & including PVC casing caping wire size 4 x 10 sqmm + 1 x 10 sqmm earth wire complete all as specified and directed.

M&L for submain wiring in replacement along with earth wire FRLSH insulated copper conductor, single core cable in surface/recessed as required in & including PVC casing caping wire size 2 x 4 sqmm + 1 x 4 sqmm earth wire complete all as specified and directed.

Supply and fix in replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair 6 Way double door Tripple Pole Neutral vertical load line Distribution Board suitable for Flush mounting and suface mounting with 250 A copper bus bar with neutral bars and earth bars with including MCCB 160 TPN as incomer and SP/TP MCBs as out going and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Supply and fix of exhaust fan with Plastic body 300 mm sweep including taking down the existing unserviceable exhuast fan and making necessary arrangements for fixing of plastic body 300 mm sweep and connecting with flexible three core cable from the ceiling rose complete all as directed. Note :- Old/unsv fans retrieved from site shall be deposited with MES store yard.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and including 4 mm dia GI wire as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 3 of MES SSR Part I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS frame and cover 6 mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed.

Supply and laying of XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core laid in trenches or passing through pipes, ducts or fixed to walls/poles, complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, wells cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.

Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed by Engr in Charge.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed by Engr in Charge.

M&L for Sand cushioning to under ground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, 2009. Note : Punned thickness only will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flat size 250 mm x 150 mm x 40mm, complete all as specified and directed.

M/S AMAR SINGH (BID ID -3402551)

R B TRADERS (BID ID -3401955)