Furnishing work (i.e. procurement of fixed furniture for class room for the work of Agri. Business Management Institute and Faculty Transit House at Daultabad (Gurugram)

Seminar Room/Class Room Chair Providing and supplying two seater desk-cum-bench. The work top shall be supplied of 18mm thick particle board with approved laminate and shade. It shall be supplied with 18mm thick shelf booktrey for storage. The front of the desk shall be clad with 18mm thick modesty panel made up of pre-laminated particle board which provides structural support as well as keeping the privacy secure. The sides shall be clad with 36mm thick particle board duly PVC edge banding. The seat shall be made up of 18mm thick plywood padded with high resilience PU foam. The understructure shall consist of MS/CRCA 80mm X 40mm rectangle pipe frame duly powder coat finish. It should be arrested together with MS pipe frame having cross-section area 80mm X 40mm rectangle pipe. The understructure shall consist of MS/CRCA 80mm X 40mm rectangle pipe frame duly powder coat finish. Understructure consists of two leg assemblies. The seat shall have tip-up mechanism in which the seat shall be able to pull down for sitting on and return to an upright position.The overall size shall be: Front Module - 1045mm X 520mm X 900mm, Middle Module - 1045mm X 810mm X 900mm, Last Module - 1045mm X 670mm X 900mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification Make: Godrej, Geeken, Delite, Methodex

Dispensary Bed: Fowler Electric Bed, Detachable Moulded Polymer Head & Foot Panel, Backrest Movement, Semi-Motorised MS Parts With Powder Coated, Overall Dimension-2100mmX1020mmX600mm DISPENSARYBED Overall Size: 2160±10 mm (L) x 1020±10 mm (W) x 450±10 mm to 810±10 mm (H)(without mattress). The wired handset controlsBack rest but the knee rest movement is manually operated. Bed have manual emergency CPR level on both sides. The bed have safety side railings, collapsible split type shall be made from ABS. The bed is provided with Diagonally locking 125 mm diameter wheels and diagonally lockable only. Four Corner rubber buffer are fitted to the four corners of the bed. Oxygen Cylinder holder (Detachable) is provided with the bed.The Bed have dual sided integral drainage bag rails with hooks. All components should be thoroughly pre-treated and epoxy polyester powder Coated This finish exclude castor wheels any stainless steel parts. Make: Godrej, Geeken, Delite, Methodex

Work station storage Wooden Storage, Particle Board Structure Size-W900XD450 XH750 WOODENSTORAGE Supplying & placing overhead storage unit with an overall size 900±10 mm X 450±10 mm X 750±10 mm. The storage shall be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. It should be made up of 18mm thick like side, back, shutter, facia, skirting. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall be supplied with 1 nos. of shelves. Door shutters shall be provided for opening and closing the storage. The shutter shall be operated with concealed crank hinge and SS handle and proper locking arrangement. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380. Make: Godrej, Geeken, Delite, Methodex

Presentation Room chair Visitor Chair, Cushion Arm, PU Moulded Seat Back, Chrome Plated Pipe stand VISITORCHAIR Supplying & Placing Visitor Chair. The seat and back shall be made of molded PU padded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat and 25mm thick having density 32kg/m³ in back. The sae shall be upholstered with fabric tapestry 0.6mm thick. The seat and back shall be arrested together with the armrest. The frame structure shall be supported by four legs made up of MS/CRCA chrome plated pipe of size30mmx15mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratchmes on the floor. The seat size shall be 465±10 mm(D) X 500±10 mm(W)and back size shall be 460±10 mm(W) X 360±10 mm(H) from seat. Overall height shall be 790±10 mm, overall depth 560±10 mm & overall width 550±10mm. Make: Godrej, Geeken, Delite, Methodex

HOD visitor chair/conference room Visitor Chair, Pipe Frame, PU Chrome Arm, Chrome Plated Pipe Stand, Leatherette Tapestry VISITORCHAIR Providing and supplying a visitor chair with ergonomic design for user comfort & shall have aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1mm thick, 535 GSM and breathable mesh tapestry behind the backrest. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. Chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(W) X 510±10 mm (D)Seat Ht 470mm from Floor. Back size shall be 460±10 mm(W) X 540±10 mm(H) from seat & From Back 530±10mm(HT). Arm Length - 310±10mm & Width - 40±10mm, Arm Rest Height from Floor - 640±10mm and height from seat 180±10mm. Overall Size- 535±10 mm (W) 700±10mm (D)925 ±10mm(H) Make: Godrej, Geeken, Delite, Methodex

Conference room chair Medium Back Chair, Pipe Frame, PU Chrome Arm, Gas Lift, Chrome Base Leatherette Tapestry REVOLVING CHAIR Providing and supplying a medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat\shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40Kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM and breathable mesh tapestry behind the backrest.. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide full back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. A chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. For seating durability the chair shall have knee tilt 360 degree revolving mechanism with four position locking and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal shall have five legged CRCA chrome plated having pitch circle dia. 640mm fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The Seat size shall be 490±10 mm(W) X 520±10 mm(D) and back size shall be 450±10 mm(W) X 535±10 mm(H) from seat & overall height = 980±10 mm, overall width/depth = 740±10 mm. Make: Godrej, Geeken, Delite, Methodex

Conference room table 20 Seater Conference Table, Particle board and MDF top, Size- W6000 X D3000 X H750 CONFERENCE ROOM TBALE 20 SEATER Supplying & Placing conference table in completely knock down conditions with an overall size 6000±10mm X 3000±10 mm X 750 ±10 mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The worktop shall be made up of 25mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The connecting top shall be made up of 25mm thick Medium density fibre-board with deco painted. The table top profile shall be in rectangle shape with round corners with full round post forming edges at front and back and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on particle board base gable end and metal pole leg. The end wall of the table on the side shall be topped by gable end. It should be 25mm thick Pre-laminated particle board and profile profile shall be in linear shape with front and back full round post form edges and other edges sealed with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the bottom to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make: Godrej, Geeken, Delite, Methodex

LIBRARY Workstation Table, Magnetic Fabric + White Glass Screen, Pre- Laminated Particle Board Top without pedestal Size- W1800 X D1200 X H1050 LIBRARY WORKSTATION Supplying & Placing workstation table in completely knock down conditions with an overall size 1800±10 mm X 1200±10 mm X 1050±10 mm that is to be assembled at site. The top shall have the size 1200±10mm X 600±10mm made up of sharing base 25mm thick Pre-laminated particle board of grade II of IS 12823 with two side laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The workstation shall have desking base system with overall height 1050mm. 25mm screen is made of Magnetic Fab+Glass 300mm. The top shall be supported on MS Powder Coated Metal pipe having length 1050±10mm with cross-section area 40mm X 20mm and powder coated pipe strip having size 100mm X 30mm X 15mm. The table under structure shall have powder coated C leg having size 1180±10mm X 700±mm with rectangular crosssection 60mm X 30mm of thickness 1.6mm. Wire manager cap 60mm shall be provided on top. vertical Power Management shall be given under flip on metal cable tray, where switch plate shall be mount and vertical metal riser for vertical wire trucking. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO- 14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screwwithdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Make: Godrej, Geeken, Delite, Methodex

Book Rack Steel Library Rack (Double Face), Thickness 0.8mm, 4 Adjustable Shelves, 25mm Thick Pre Laminated Partical Board Cladding On Sides And Top BOOK RACK Providing, supplying and placing double side steel Library Racks in perfectly upright and straight position. The overall size of the rack shall be 940±10 mm (W) X 600±10 mm (D) X 2110±10 mm (H). The rack shall be supplied with 4 nos. of adjustable shelves on both side i.e. 10 loading levels. Rack, side panel, skirting shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Side and top shall be covered with 18mm thick Pre-laminated particle board of grade II of IS 12823. The edges of the board shall be sealed with 2mm thick PVC edge banding. The add-on units can be stacked width wise to form a bank of racks having common side panel. The shelves shall be folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly Distributed load capacity per each shelf shall be 80kg maximum. Each shelf shall be provided with stiffener at bottom for strength and back stiffener for separator between front and rear shelf. All steel components shall be epoxy polyester powder coated to the thickness of 40-60μ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. Make: Godrej, Geeken, Delite, Methodex

Book Rack Steel Library Rack (Single Face), Thickness 0.8mm, 4 Adjustable Shelves, 25mm Thick Pre Laminated Partical Board Cladding On Sides And Top BOOK RACK Providing, supplying and placing an open display book racks. The overall size of the rack shall be 925±10 mm (W) X 300±10 mm (D) X 1800±10 mm (H). The rack shall be supplied with 4 nos. of adjustable shelves i.e. 5 loading levels. Rack, side panel, skirting shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Side and top shall be covered with 18mm thick Pre-laminated particle board of grade II of IS 12823. The edges of the board shall be sealed with 2mm thick PVC edge banding. The add-on units can be stacked width wise to form a bank of racks having common panel. Back panel up to the bottom of third rack shall have additional rigidity. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 80 kg maximum. Each rack shall be provided with stiffener at bottom for strength. Label holder & range indicators on each main unit for inserting labels. All steel components shall be epoxy polyester powder coated to the thickness of 40-60μ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. Make: Godrej, Geeken, Delite, Methodex