Electrical system in SNM Hospital Leh by way of Replacing Damaged Light fixtures, Cables etc.

Amount

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a)2 x 1.5 Sq.mm+ 1 x 2.5 Sq.mm earth wire

b)2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

c)4x6 Sq.mm + 2x6 Sq.mm earth wire

d)2x 16 Sq.mm + 1x 6 Sq.mm earth wire

e)4x16 Sqm +2x6Sqmmm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. A)1x 1.5 sq. mm

b)1 x 2.5 sq.mm

c)1 x 6 sq.mm

d)1 x 10 sq.mm

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required a)5/6 A switch.

b)3 pin 5/6 A socket outlet

c)15/16 A switch

d)6 pin 15/16 A socket outlet

TV antenna socket outlet

Telephone socket outlet

Bell Push

Supplying and fixing 3pin, 5A celling rose on the existing junction box/ wooden block including connection etc. as required

Supplying and fixing modular blanking plate on the exisring modular pate & switch box excluding modular plate as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No 3 5/6 amps modular socket outlet and 2No 5/6 amps modular switch, connection etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 5/6 amps & 15/16amps modular socket outlet and 15/16 amps modular switch, connection etc. as required

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a)8way ( 4+ 24) Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a)Single pole 6/16 amp.

b)Single pole &netural

Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required a). 25 mm

Supply, installation, testing & commissioning of GI Electrode Earthing with 40 mm dia and 3 meter length, heavey duty pipe with 40mmx50mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying and laying 25mm x 5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm).

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic relase and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections etc. as required MCCB FP 100 Amp 30 KA

MCCB FP 250 Amp 36 KA

Fabrication ,supplying ,installation testing and commisssioning of following pannel made out of 2mm thick M.S sheet, wall mounted ,vermin & dust proof ,outdoor type with lockable type hinged doors,duly painted with provision for fixing of 1 no incomer MCCB,2 type change occer switch 1no. fixing 1 set of Aluminium Bus bar ,and strip for housing MCB,s 24 Nos , MF Digital Meter and and other allied accessories as required .(Make as per annexure)

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.). a)TPN 63 Amp

Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE Power Cable of following sizes on surface/surface cable tray,0.50 mtr bleow ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed) a)16 Sq.mm 4 Core -Armoured

35 Sqm m 3.5 Core -Armoured

95 Sqm m 3.5 Core -Armoured

120 Sqm m 3.5 Core -Armoured

Supply and making end termination with brasss compression gland and alunium lugs for following size of PVC insuated and PVC sheathed /XLPE aluminium conductor cable of 1.1 K.V Grde a)3(1/2)x35 Sqm (32 mm)

b)3(1/2)x50 Sqm (35 mm)

c)3(1/2)x70 Sqm (38 mm)

c)3(1/2)x95 Sqm (45 mm)

c)3(1/2)x120 Sqm (45 mm)

c)3(1/2)x150 Sqm (50mm)

c)3(1/2)x185 Sqm (57 mm)

Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall. Wipro LR02 -132-XXX-57-G1or equivalent approved make

Dressing of existing almunium cables by way of laying 0.50m bwlow ground level/clamping on wall etc. as per required at site

Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall. Wipro LR02 -132-XXX-57-G1or equivalent approved make

Supplying and fixing following luminaries as required LL20111-XXX65NE3 Wipro 10 watt Philips/ Crompton Greaves

20 watt LED tube light fitting. Model / make or equivalent make and model Philips/Crompton Greaves.

Supplying, installation testing and commissioning of LED 2'x2' recess mounted fixture hat delivers atleast 3000 lumens and wattage not more than 36 watt. The luminaries shall have a CRC a power coated body and a high efficiency diffuser.WIPRO CRCO10 R0 38HP57GL OR wquivalent approved make

Supplying and fixin of Angle /Baten Holder with 9 watt LED Lamp oolycrbonate including making complete connection etc. as required .(Make as per annrxure enclosed)

Repair of existing globe light fittings by way replacing damaged CFLs by way 25 watt LED Lamp. Including miner repairs of existing system

Repair of exising Feeder Pillars by way of dismanteling damaged MCCB, repairs/ replacement of existing Bus bars, digital metre indicator connetin, Locks etc.

Repair of existng ceiling light by way of replacing damaged CFLs by 12wat LED Lamp and Holder etc as required

Repairs of existing mast lights by way of repalacing damaged flood by LED type flood light 250watt. Including repair to the existing system. Wipro (LF30-342-060-57-XX). 250W, 5700K

HIBA ENGINEERING AND CONSTRUCTION WORKS