Drainage work using RCC Hume pipes (1000 mm) in front of Agra Fort under Zone-3 Tajganj.

Earth work in excavation by mechanical means (Hydraulic excavator/manual means over areas Hexceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge

Removal of sludge, kankar, brick bats, organic or including lead 30m and 3.00 meter lift with specials morganic material in faul position or in liquid mud T&P labour etc. all complete.

Supplying and stacking at site 53mm to 22.4 mm size stone aggregate

1:5:10 (1 cement: 5 coarse sand (zone-111) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying cement concrete in 1:4:8 (1) cement 4 fine sand 8 brick ballast 40 mm gauges) and curing complete, including cost of form work in foundation and floors. (5-Chapter PWD.SCH.-275)

Laying NP-4 pipe RCC concrete pipe for culvert on first class in single row including fixing socket with cement mortar 1:2 but excluding excavation, rotection works, backfilling, concrete and masonry works in head walls and parapets Clause 2900.

Brick work with common burnt clay F.P.S. (non 10.86 modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sandi

Cement plaster in fine sand: 12mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)

R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:16:3 (One part of Cement, 1% part of Coarse sand and 3 part of 2cm. Stone Grit) in Wall/R.CC Column excluding supply of reinforcement and its bending but inculding its fixing and binding the same with 24 BWGI binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-200 grade. (5-Chapter PWD SCH.No..12)

Steel reinforcement for R.C.C. work including 1.41 straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supply & fixing RCC Menhole cover heavy duty 2.00 size etc. All complete. (Non Scheduled)

Sub Total (A)

Add/Deduction Rs. For Estimate Figure Amount Match

Grand Total