Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC 1 1 MEREDITH STREET KOLKATA 700072 INDIA | KOLKATA | WEST BENGAL | 700072 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹35.5 L+₹1.7 L (5.01%)Rejected-Finance 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹36.6 L+₹2.8 L (8.32%)Rejected-Finance 53 TOLLYGUNGE CIRCULAR ROAD KOLKATA 700 053 | KOLKATA | WEST BENGAL | 700053 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹36.9 L+₹3.1 L (9.23%)Rejected-Finance | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹37.1 L+₹3.3 L (9.71%)Rejected-Finance 27 WESTERN STREET ROOM NO 307 KOLKATA 700012 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700012 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
8072/B/E8
2022_MES_537596_1
GE/ALP (8072B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE ALIPORE KOLKATA
Class D and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹64,000
Yes
26 Sept 2022
13 Jul 2022
18 Aug 2022
13 Jul 2022
17 Aug 2022
27 Jul 2022
Amount
Taking down chowkhats or frames with shutters ( without taking off shutters from the frames)Area not exc 1.5 sqm each complete all as specified and as directed.
Taking down shutter and refixing in same opening, size of shutter is exc 1.0 sqm but not exc 2 sqm each. complete all as specified and as directed.
Rescuring, Easing /adjusting without taking down shutter, size of shutter is exc 1.0 sqm not exc 2 sqm each. complete all as specified and as directed.
Supply and fixing 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type complete all as spd and directed
Supply and fixing factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S. square tube,incl holdlfast all as per specification and drawing. complete all as specified and as directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing. complete all as specified and as directed.
Supply and fixing 100 mm long butt hinge, medium weight, stainless steel complete all as specified and as directed.
Supply and fixing aluminium anodised handles cast type, anodised 150 mm long complete all as specified and as directed.
Supply and fixing aluminium anodised tower bolt cast type, anodised 200 mm long complete all as specified and as directed.
Supply and fixing 300mm long sliding door bolts with hasp & stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and as directed.
Supply and fixing PVC ventilator fixed type half portion 4 mm frosted glass and half portion stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm including fixing of ventilator incl taking down old ventilator complete all as specified and as directed.
Taking down aluminium door(any size) and refixing in same position after repair i.e. change of pivot, beading, gasket, setting of door and change of damaged style /rail any length in aluminium section thickness not less 1.50 mm to match with existing anodised /power coated complete and refixing in same position. complete all as specified and as directed.
Supply and fixing floor door stopper of overall length of cover plate 150mm Aluminium alloy body and tonuge with hard drawn steel spring. complete all as specified and as directed.
Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of pink primer complete all as specified and as directed.
Material and labour for preparing old wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paints complete all as specified and as directed.
Material and labour for preparing old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paints complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel/aluminium frames glazed with putty or fixed with beads complete all as specified and as directed.
Supply and fixing 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane. complete all as specified and as directed.
Supply and fixing 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane. complete all as specified and as directed.
Supply and fixing in repairs Powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete including aluminium door styles of size 80 mm x 38 mm x 3.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80mm x 38mm x 3.00 incl taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing in repair aluminium anodised Partition wall of frame size 80mm x 38mm x 3.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and as directed.
Material and labour for 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes, aluminium door and aluminium partitions complete all as specified and as directed.
Supply and fixing in repairs for Powder coated aluminium windows/ventilator fixed type ,without sash bar weighing 0.55 kg/m including,necessary joining cleats, glazing clips, rubber packing,powder coated aluminium snap beading, screws and taking down old window/ventilator complete all as specified and as directed.
Supply and fixing in repairs for Powder coated aluminium windows/ventilator/door/partitons, rebates including jointing cleat for fixing etc. complete all as specified. (minimum thickness of powder coating 50 micron). complete all as specified and as directed.
Supply and fixing in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg. complete all as specified and as directed.
Supply and fixing in repair 5 mm thick beveled edge best quality looking mirror of size 600x450 mm fixed with screws complete all as specified and as directed.
Supply and fixing in repair stainless steel soap dish fixed in wall with screws complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for non skid, joint free, coloured ceramic tiles 6-7mm thick (Square/Rectunglar), area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
Material and labour for coloured, glazed ceramic tiles size 300x200x6-7mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over 10mm thick rendering in cement mortor (1:3) complete all as specified and as directed.
Material and labour for coloured, glazed ceramic tiles size 450x300x 6-7mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over10 mm thick rendering in cement mortor (1:3) complete all as specified and as directed.
Material and labour for light shade Vitrified ceramic tiles 9-10 mm thick (Sqr/ rectangular) Polished, area of each tiles n.exc. 0.36sqm, in floors etc. set and jointed in neat cement slurry over and including a bedding layer of scread bed 15 mm thick in cement mortar (1:4) and pointed in white/colour cement to match. complete all as specified and as directed.
Material and labour for Granite(of any type) 18-20 mm thick for slab machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15 mm thick screed bed in cement mortar (1:4) including grinding & polishing fixed in slab/steps complete all as specified and as directed. complete all as specified and as directed.
Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. beams, columns etc. 50 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed upto 8 storey bldg. (including necessary scaffolding)
Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs ,lintel,chajja, fin , facia etc. 25 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed (upto 8 storey bldg). (Including necessary scaffolding)
Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiselling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free of reinforcement bar complete all as specified and as directed. (upto 8 storey bldg). (Including necessary scaffolding) Make( Rust removing chemical ):- Reebaklens RR of FOSROC or equivalents solutions SIKA/STP as approved by GE.
Material, labour and prepared existing reinforcement surface by brush and application two component epoxy zincrich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre complete all as specified and as directed. upto 4 storey bldg.(Including necessary scaffolding) Make- Nitozinc primer of FOSROC or equivalents chemical given in approved make list of PS.
Material and labour for introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc complete all as specified and as directed. upto 4 storey bldg. (Including necessary scaffolding)
Material and labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days , 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitable type formwork etc. as per manufacturers instruction complete all as specified and as directed. upto 4 storey bldg. (including necessary scaffolding) Make (micro concrete):-Renderoc RG of FOSROC or equivalents solutions SIKA/STP as approved by GE.
Supply, materials and application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively ( maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface for strengthening of beams, columns & other structural elements of average thickness 25mm and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed. upto 8 storey bldg. (Including necessary scaffolding) Note:- This item shall be executed where shuttering is not possible or small patch repairs of structural elements (Make :- polymer modified reinstatement mortar):- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP as approved by GE.
Material and labour for applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified and as directed. upto 8 storey bldg. (Including necessary scaffolding) Make:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ Maruti / Choksey chemicals. NOTE FOR ITEM NO 35 TO 41 :- Providing scaffolding shall be of double layer self supporting steel scafolding to external perimeter of building duly cross braced and properly aligned for the functional aspect and safety of the building upto 8 storey bldg and including 21 Mtr high complete all as specified and as directed.(for strutural wk).
Material and labour for grinding and polishing of old kota stone.marble granite flooring, landing, risers,steps, mosaic floor/wall complete all as specified and as directed.
Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Material and labour for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortor (1:6) complete all as specified and as directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:4) complete all as specified and as directed.
Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and as directed.
Material and labour for 50 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in flooring, finished even and smooth with using extra cement complete all as specified and as directed.
Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
Material and labour for 15mm thick plastering on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) surface finished even and fair complete all as specified and as directed.
Material and labour for 15mm thick plastering on fair faces of brick wall and concrete surfaces in cement mortar (1:4) surface finished even and fair complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces of wall by complete removal of existing treatment of old decorated wall surfaces complete all as specified and as directed by Engr-in-Charge
Material and labour for applying 3mm thick wall care putty on old surfaces of wall complete all as specified and as directed by Engr-in-Charge
Material and labour for preparation of plastered and unplastered surfaces of old decorated walls and applying one coat of acrylic oil emulsion distemper complete all as specified and as directed by Engr-in-Charge
Material and labour for preparation of old decorated surfaces of walls and applying two coat of acrylic oil emulsion distemper complete all as specified and as directed by Engr-in-Charge
Material and labour for preparation of old decorated wall surfaces by complete removal of existing treatment of Ceiling surfaces complete all as specified and as directed by Engr-in-Charge
Material and labour for applying 3mm thick wall care putty old decorated ceiling surfaces complete all as specified and as directed by Engr-in-Charge
Material and labour for preparation of plastered and unplastered surfaces of old decorated Ceiling and applying one coat of acrylic oil emulsion distemper complete all as specified and as directed by Engr-in-Charge
Material and labour for applying two coat of acrylic oil emulsion distemper to old decorated surfaces of ceiling complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with and including 3mm thick wall care putty complete all as specified and as directed.
Material and labour for preparing new decorated plastered or unplastered surfaces of ceiling, pillasters, cornices etc and applying 3 mm thick wall care putty and with two coat of acrylic distemper complete all as specified and as directed.
Supply and fixing in repair sinks without drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 410mm x330mmx 160mm complete all as specified and as directed.
Supply and fixing in repair stainless steel toilet paper holder fixed with cp screws in wall complete all as specified and as directed.
Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
Supply and fixing in repair cast iron 110 mm floor trap fixed in floor with grating including jointing with solvent (1:2:4) cement concrete, complete all as specified and as directed.
Supply and fixing 32 mm dia waste pipe for wash hand basin and urinal down pipe fixed in repairs complete all as specified and as directed
Supply and fixing in Repairs vitreous China wash down water closet pan ( padestal pattern) including PVC seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, (Including fixing bolts, (Excluding flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. complete all as specified and as directed.
Supply and fixing in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified and as directed.
Supply and fixing in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm, excluding chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and as directed.
Supply and fixing in repair 15mm bore CP angular valve, with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Supply and fixing in Repairs 15 mm Dia CP Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and as directed.
Supply and fixing in repair 15 mm bore pillar taps, Chromium Plated, with capstan heads, fancy type screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
Supply and fixing in repair 15 mm bore Chromium Plated, with capstan heads,Fancy type screwed down for pipe, high pressure HOT and COLD Mixer tap (3 in one) with long screwed shanks and fly-nuts, complete all as specified and as directed.
Supply and fixing in repair 600 mm PVC connection 15 mm size with PTMT nut of complete all as specified and as directed .
Supply and fixing in repair 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as specified and as directed.
Supply and fixing in repair 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and as directed.
Supply and fixing in repair 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and as directed.
Supply and fixing in Repairs Towel rail 600 mm long of brass chromium plate 20mm dia fixed with and including chromium plated brass screws & wooden/plastic cleats. complete all as specified and as directed.
Cleaning and dusting of GI pipes line 15 to 25 mm dia by GI wire and pressure pump and washing down whole GI line complete all as specified and as directed.
Supply and fixing in repair PVC Health faucet with all necessary fittings complete all as specified and as directed.
Demolation of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) including cutting of reinforcement to facilate demolition as required complete all as specified and as directed.
Material and labour for RCC(Nominal Mix) in type-B1 (1:2:4) (using 20mm graded stone aggregate) slabs supported on walls for cup board and Kitchen slabs complete including necessary form work all as specified and as directed.
Material and labour for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and as directed.
Supply and fixing in repair 15 mm bore CP shower fancy type 150mm long neck complete all as specified and as directed.
Supply and fixing in repair 20 mm bore MTA/FTA/ELBOW/TEE for Cpvc Pipes complete all as specified and as directed.
Supply and fixing in repair 25 mm bore brass Tee/Elbow/Fta/Mta for CPVC complete all as specified and as directed.
Tirupati Buildcon Pvt. Ltd.
S.S.ENTERPRISE
Rounaq Enterprise
ELECTRO COMMERCIAL CO
BHARUKA ENTERPRISES
CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION
J B NATH AND SON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .