Comprehensive repair to steel, doors roofs concrete surfaces at Adm area ground post and certain sheds at Depot area under GE Bharatpur

Amount

M&L for removal of existing treatment by taking out loose/spalled out waste material by chiselling chippings etc from beam, wall, columns, band etc. including use and waste of form work and providing steel wire fabric mesh of size 75mm X 75mm of dia 3.15mm fixed by L shaped mild steel shear key welded with existing reinforcement and providing 75mm thick concrete (1:1.5:3) type 0 using graded stone aggregate of 10mm maximum size mixed with polymeric admixture with pressure nozzle (guniting) and finishing the surface in CM (1:3) surface finished even and smooth without using extra cement and removing the debris outside MD land complete all as specified and directed. Note:- Quoted rates shall deemed to be inclusive of all form work and scaffolding or other handy T&P required to make up proper shape and size of columns/ Pillars, beam and wall partition etc.

M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt,oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application , rerpair all cracks by cutting V groove and fill with PMC mortar ( polymer modified cement mortar ) prepared in ratio as per manufacturers specification provide 75mm x 75mm coving made out of PMC mortar as above on all joints of vertical upstand to ensure that moisture content in the prepared surfaces does not exceed 5% immediately before application of liquid membrane. Material incorporation & PROTECTION BE PROVIDED AS TERRASHEILD FIRST APPLY WITH WATER ( RATIO TERRASHEILD: WATER will be 4 : 1) as primer with coverage area 0.1kg per Sqm. After 2-3 hours later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 kg per Sqm with roller. spread non woven geo textile of 40/50gsm with overlap of 50mm in both direction when the surface is still tacky. After 4-6 hours later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thicknbess coverage area 0.5 to 0.75 kg per Sqm with roller. Final thickness of complete treatment should be min 1.0mm. water tank and khurra location one additional coat of terasheild .30 to .40 mm thickness coverage area 0.5 to 0.75 kg per Sqm be provideds. after complete application will be done authorised applicator from manufacturer and manufacturer's applicatiuon complete all as specified and directed. Make IWL/STP/Piddilite.

M&L for screed bed or bedding layer of cemnt mortar 1 : 4, 20mm thick finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and directed.

M&L for 50 mm thick Granolithic concrete 1:1:2 on concrete surface in floor , wall etc. in any position , finished to an even and fair surface complete all as specified and directed.

M&L for 75mm thick Cement concrete 1:2:4, type B-1 (20mm graded aggregate) as in floors, pavings etc and finishing even and smooth ( without using extra cement ) complete all as specified and directed.

M&L for greasing and easing of rolling shutter of size not exc 13 Sqm alongwith the guide channel, helical spring, anchoring and all other as to work the shutter in eary way and complete all as specified and directed.

M&L for preparation and two coat of synthetic enamel paint over old steel & iron Surfaces of any description, over 10cm in width or girth,complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick masonary or concrete surface of wall, finished even & smooth, without using extra cement, including taking down, raking out joints, hacking for key, scrubbing down with water etc of cement plaster, complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) mixed with WPC but on other than fair faces of brick wall, finished even & smooth, without using extra cement , including taking down, raking out joints, hacking for key, scrubbing down with water etc of cement plaster, complete all as specified and directed. complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

Supply only Integral WPC complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified and directed.

M&L for 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked hook bolts, complete all as specified and directed.

Ditto all as per item No.13 above but except sheets, complete all as specified and directed. .

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and directed.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and directed.

S&F in repair for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame or stone or concrete or bricks surrounds glazed with putty, taking out old pins punching or drilling out, complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane including punching or drilling out old glazing pins/spring clips, and providing & fixing new ones complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint in camouflaging pattern with roller application over one coat of water based white pigmented akali resistant priming paint for external wall , complete all as specified and directed.

Complete removal of existing treatment on Wall including washing rubbing down and stopping of distempered and painted surface and preparing old surface applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior emulsion paint in camouflaging pattern with roller application over one coat of water based white pigmented akali resistant priming paint for external wall over 1mm thick white external wall cement putty , complete all as specified and directed.

M&L preparation of new plastered surface and applying two coat of distemper oil emulsion over one coat of water based white pigmented alkali resistant priming paint over 1 mm thick internal wall care putty conforming to IS:109-1968 white or tinted on ceiling & wall complete all as specified and directed.

Complete removal of existing treatment on walls including washing rubbing down and stopping of distempered and painted surface and preparing old surface applying two coats of oil bound over one coat of alkali resistant primer over 1 mm thick internal wall care putty incl preparing by rubbing etc complete with roller application complete all as specified and dirercted.

Complete removal of existing treatment on ceiling including washing rubbing down and stopping of distempered and painted surface and preparing old surface applying two coats of oil bound over one coat of alkali resistant primer over 1 mm thick internal wall care putty incl preparing by rubbing etc complete with roller application complete all as specified and dirercted.

M&L for 5 mm thick rendering in CM 1:3, on fair faces of concrete surfaces as in ceiling, finished even and smooth without using extra cement including takling down cement or cement lime plaster , of any description, from concrete surfaces complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials and making good disturbed surfaces of wall, floor & ceiling etc. complete all as specified and dirercted.

Dismantling of old U/S sub main wiring and service wire of any size & make complete all as specified and dirercted.

Dismantling of old U/S rusted main switch/DB of any size capacity and make complete all as specified and dirercted.

M&L concealed point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe size not less than 20 mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface and making good the disturbed surfaces of wall/ceiling by means of Wall putty and matching colour of existing wall, PVCsleeve/dash fastners with cadmium plated screws including suitable size of PVC boards/ sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated but FRLS unsheathed copper earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch.

One fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin 6 Amp socket point outlet on the independent board

One bell/buzzer point controlled by one push button.

All as per item No 31 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal ISI marked including suitable size of PVC board make : Anchor code No 3290 penta or equivelent make as specified in Appx 'B' complete all as specified and dirercted.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt complete all as specified and dirercted.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified and dirercted.

S&F switch piano flush button single pole one way 16 Amps 230 volt grade complete all as specified and dirercted.

S&F socket 3 pin 16A, flush type complete all as specified and dirercted.

S&F bell push flush type 5 Amps 230 volts grade complete all as specified and dirercted.

M&L bell multi musical type 230 volts grade complete all as specified and dirercted.

S&F in repair step type electronic fan regulator EME type 100 watt complete all as specified and dirercted.

M&L concealed submain wiring complete with 10 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 25 mm dia with all PVC accessories complete all as specified and dirercted. Note: Two runs of 10 sqmm and one run of 6sqmm earth conductor and PVC conduit pipe shall be measured as one length only.

M&L concealed submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified and dirercted. Note: Two runs of 6 sqmm and one run of 4 sqmm earth conductor and PVC conduit pipe shall be measured as one length only.

M&L concealed submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified and dirercted. Note: Three runs of 4 sqmm and PVC conduit pipe shall be measured as one length only.

Supply and fix in repair of distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt, 415V of the following DBs complete all as specified and as dirercted for the following:-

4 way TPN with busbar 415 volts (double door)

8 way SPN with 200 amps rated busbar 240 volts (double door type).

4 Way SPN with 200Amp rated busbar 240V (Double door type)

S&F in repair MCCB's, MCB's of following capacity :-

MCB TPN 63 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

MCB TPN 32 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

MCB SPN 40-63 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

Supply and fixing in replacement of 20 watt LED tubelight fitting retro fit type 4Xfeet long with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.

Supply and fixing sensor based 20 watt LED tubelight fitting batten type 4 X feet long with rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.Make Havells of Model No: R20RBA or equivalent in crompton / Phillips complete all as specified and dirercted.

S&F in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all incl 9watt LED lamp as complete all as specified and directed.

S & F in repair street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and directed.

S&F in repair 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 2.5 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed .

S&F in repair LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders & Bulb with connector block,etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and dirercted.

Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and dirercted.

Supply and fixing round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and dirercted.

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified and directed.

Supply & fix in repair 4 way VTPN Distribution Board (with provision for MCCB as incomer & MCB as outgoing) for suitable ofb MCCB with suitable bus bar & Prewired complete all as specified and dirercted.

S&F in repair on existing location including taking out of existing MCCBs of following capacity complete all as specified and dirercted. :

MCCB 415 volts 100 Amps 04 pole 16 KA Thermal maganatic, breaking capacity not less than 16 KA,415 volts

S & F or laying galvanised steel tubing Medium grade (ISI marked) of size 40mm bore grounting in wall for hanging of ceiling fan with proper fixing of hanging clip & finishing of wall complete all as specified and dirercted.

S & F in replacement 4 sqmm solid conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular from over head ACSR conductor to fitting complete all as specified and directed.

M & L in repair for Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.50 Mtr below the ground level connected to GI earth wire 4mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point, 20 mm dia GI watering pipe medium grade with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates with 8 mm reinforcement bors @ 15 cm c/c bothway complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in soft/loose soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm complete all as specified and directed. (Note:- Up to7.5Mtr length of pipe of 15 mm dia and GI wire shall be deemed tobe included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item

Tulsi Enterprises

GANGA CONSTRUCTION

M/s Gupta Traders

M/s K Prashad and Sons