Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹5.8 L+₹61,646.70 (11.9%)Rejected-Finance MADHUBANI BAZAR PURNEA PO PARORA PS K NAGAR PURNEA BIHAR | PURNEA | PURNEA | BIHAR | 854301 | L2 | Rejected-Finance Not Eligible |
Tender Value
₹6.0 L
EMD Value
₹11,900
Closing Date
6 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PURNEA
GE AF PURNEA, P.O - CHUNAPUR AIR FIELD, DIST- PURNEA BIHAR, PIN CODE- 854303
PROVN OF FOOTPATH BETWEEN PI STAFF OTM AND UNIT AREA OF 35 BIHAR BN PURNEA AND CERTAIN SANCTIONED WORK UNDER GE AF PURNEA
2022_MES_562161_1
8995/E8
Open Tender
Civil Works
Item Rate
180 days
PURNEA
Please Refer Tender Document
6 documents required · 6 mandatory
₹500
GE (AF) PURNEA
₹11,900
Yes
24 Dec 2022
9 Nov 2022
8 Dec 2022
9 Nov 2022
6 Dec 2022
22 Nov 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n. exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n. exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.
M&L for returning ,filling including spreding,levelling watering and well raming in layer n exc 25 cm complete all as specified and directed.
M&L for removing excavated soil n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
M&L for moorum filling/red bajri filling in floor or paving laid in laying n.exc 15 cm thick spread levelled and rammed including watering, complete all as specified and directed.
M&L for hardcore broken stone of gauge n.exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for hardcore broken stone or boulders hardcore of gauge exc 63mm but n.exc 100mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rolled /rammed to a true surface , complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in bed concrete for foundations, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.
M&L for 100 mm thick plain cement concrete (1:4:8) type D-2, (40mm graded aggregate) as in sub base complete all as specified and directed.
M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in floor finishes surfaces to receive tiles, complete all as specified and directed.
M&L for 40mm thick plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in pcc floor , complete all as specified and directed.
M&L for 75mm thick plain cement concrete (1:3:6), type C-2, (using 40 mm graded stone aggregate) as in plinth protection and finished the surface even and smooth without using extra cement,complete all as specified and directed.
M&L for pcc 1:2:4 type B2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases),complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment over 25 mm thick sand cushioning complete all as specified and directed. by engr-in-charge. sand measured and paid seperatly. Note: (i)qnty of sand measured and paid seperatly. (ii)Design, shade and pattern of fixing of paver block shall be as directed and approved by GE.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for brickwork with subclass `B' bricks old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed
Taking down cement plaster on brick/concrete surfaces incl raking out joints, hacking for key scrubbing down with water ,complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.complete all as specified and as directed.
M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance on wall complete all as specified and as directed.
M&L for taking down of Hanger Sliding door gate of size 10.00 x 9.25 Sqm each mechinically operated i.e. using crane/ Scaffolding/ Safety measures and refixing after making under mentioned repair for smooth movement of sliding shutter on rails and ISMB etc, complete all as spd and directed. (a) Taking out the Bottom pulleys of 300 mm dia alongwith nuts, bolts etc of sliding shutters at both slides of hanger and replace with new pulleys, nuts, bolts, bearing etc incl assembling & fixing in posn all as specified as directed. (b) All as above in para (a) but roller of size 300 mm at top. (c ) S&F bearing in wheels/ roller of any size and capacity. (d) S&F in repair mild steel work as in stopper incl provn of nuts bolts and necessry welding for fixing at top of door shutter of height 10 Mtr to 12 mtr to resist the door from both side of channel, complete all as specified and directed. (e) Repair of existing brake system incl replacement of defective tower bolts etc for locking system incl necessary arrangement for lock the rail as required as directed. Note :- (1) The work of repair of sliding door of hanger will be carried out by a specalized agency as approved by GE. (2) The work shall be carried out in hanger of approx ht. 12.00 mtr and quoted rate including the following provision and nothing extra shall be paid on this account. (i) Arrangement of cranes, lifter, safety precautions, scaffolding, clamping hook, life jackets and rope etc required at site. (ii) Contractor will provide ambulance/ first aid box required during Hanger work. (iii) Activity in hanger will be complete with in 24 Hrs of time frame.
M&L for non-skid ceramic, straight cut/joint free, 7 to 8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, , complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in skirting /dado etc. set and jointed in neat cement slurry and pointed in white or coloured over and including 10mm thick backing coat in cement mortar (1:4),complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.
S&F steel work in tubular trusses , post/columns including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St-240 ,complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5 cm.complete all as specified and directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment FE 410 W (Gde 250) Gde 'B' complete all as specified and directed.
M & L for Framed work as in doors or gates of angle or other section Fe 410 -W (Gde-E- 250)quality- A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F Bands, straps, supports or stays for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165,complete all as specified and directed.
S&F mild steel work in flat, round or square bars, in available lengths Fe 410-W (Gde-E-250) quality- A,complete all as specified and directed.
Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
S&F pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.
M&L for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete 1:2:4 type B-1 as required. exc half brick but n.exc one brick.complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts, chains complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
ALAM ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .