REPAIR AND MAINT TO SUMMER APPLIANCES SUCH AS AIR CONDITIONERS, WATER COOLERS, DESERT COOLERS, REFRIGERATORS, AC PLANT AND VOLTAGE STABILIZERS ETC AT MILITARY STATION ABOHAR AND FAZILKA.

M & L for annual servcing of split AC/Window AC/Water Cooler/Refrigerator/Deep Frezzer any capacity by disconnecting electric connection from its stabilizer or its electric supply board and cleaning it with pressurised water and nylon brush then apply one coat of descaling solution and cleaning with nylon brush to the condensing coil shall be properly carried out damaging other parts, cheking and making serviceable electrical connection of DB, stablizer,and tightening of loose connection complete.

M&L for Taking down old and unserviceable sealed compressor and Supply & fixing of new sealed compressor hermetically of capacity 150/150 Ltrs,Suitable for water cooler , including cleaning ,Vaccumizing, Gas charging of adequate qty with Testing on load complete all as specified and directed by Engr-in-Charge.

All as per description of Srl item No2 above here-in-before but sealed unit compressor suitable for water cooler capacity 120 Ltrs, all as directed by Engr-in-Charge.

All as per descrirtion of Srl item No 2 above here-in-before but sealed unit compressor suitable for water cooler capacity 40/80 Ltrs, all as directed by Engr-in-Charge.

Labour only for attending complaints of Air Conditioner/Water Cooler/refrigerator/deep Freezer carried out by manufacture's authorised mechanic from servicing center without any delay with rectified the defects by carefully opening and check the Acs for smooth functioning complete all as specified and directed. Note :- Items shall measure and paid seperatrly under respective item of BOQ.

Supply & fixing in replacement of Fan motor with blades of water cooler as per existing capacity and as per site rquirement of water cooler complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Water cooler of capacity 150/150 ltrs including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Water cooler of capacity 60/120 ltrs including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Supply & fixing in replacement Water taps heavy duty Internal thread / outer thread for 15mm bore pipe, all as specified and directed by Engr-in-Charge.

Material and Labour for Replacement of thermostat switch with knob for water cooler any cap complete all as specified and directed by Engr-in-charge.

Material and Labour for Replacement of starting capacitor 60 Mfd oil filled 240 volt AC Supply suitable for all type of water cooler complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Water cooler of capacity 40/80 ltrs including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Material and Labour for Replacement of copper filter and capillary tube of water cooler any capacity complete all as specified and directed by Engr-in-charge.

Material and Labour for Replacement of running capacitor of 10 Mfd oil filled suitable for any cap water cooler complete all as specified and directed by Engr-in-charge.

Material and Labour for condenser unit complete suitable for 150/150 Ltr/Hr cap. water cooler repairs of leakages in system including gas charging flushing out the system brazing, welding and jointing the suction reed and discharge reed complete all as per direction of Engineer-in-Charge

Material and Labour for condenser unit complete suitable for 60/120 Ltr/Hr cap. water cooler repairs of leakages in system including gas charging flushing out the system brazing, welding and jointing the suction reed and discharge reed complete all as per direction of Engineer-in-Charge

Material and Labour for condenser unit complete suitable for 40/80 Ltr/Hr cap. water cooler repairs of leakages in system including gas charging flushing out the system brazing, welding and jointing the suction reed and discharge reed complete all as per direction of Engineer-in-Charge

M&L for Taking down old and unserviceable sealed compressor and Supply and fixing new hermetically sealed compressor suitable for 1.5 ton window/Split type AC complete including accessories and cleaning , vaccumizing ,gas charging of adequate qty in the unit and soldering/ brazing of suction and discharge pipes complete all as specified and directed by Engr-in-Charge.

All as per description of srl item No 18 here-in-before but suitable for Window/split type AC of 2.0 Ton Capacity.

Material & labour for charging of refrigerant gas in Window type / Split type Ac 2.0 Ton cap including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Window type / Split type Ac 1.5 Ton cap including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Supply & fixing indoor unit of Split Type AC of capacity 1.5 Ton 5 star Including Copper cooling coils, Blower motor, PCB plate, drain out pipe and connecting items,complete all as specified and directed by Engr-in charge. Make : Panasonic/LG/Hitachi

Supply and installation of Insulation pipe highly flexible pipe closed cell nitrile rubber Suitable for suction /discharge copper tubes of 1.5 TR/2 TR split AC including PVC self adhesive whit mansoon tap over the insulation tap complete all as specified and directed by Engr-in-charge.

Supply & fixing outdoor unit for Split Type AC of capacity 1.5 Ton Including compressor , Copper condenser, fan motor, copper pipe of 6 mtr length and connecting items, suitable for ser item no 22 above complete all as specified and directed by Engr-in charge.Make : Panasonic/LG/Hitachi

Material and labour for replacement of copper pipe of size 6.35 mm from outdoor unit to indoor unit including soldering and brazing complete all as specified and directed by Engr-in-charge.

Material and labour for replacement of copper pipe of size 12.7 mm from outdoor unit to indoor unit including soldering and brazing complete all as specified and directed by Engr-in-charge.

Material and labour for repairing of PCB card for split AC /Window type AC of cap 1.5 TR all type complete all as specified and directed.

Material and labour for repairing of PCB card for split AC /Window type AC of cap 2.0 TR all type complete all as specified and directed.

S&F Condensor fan motor of Speed 900 RPM of window/Split Air conditioner of cap 1.5/2.0 TR complete all as specified and directed by Engr-in-charge.

S&F Swing motor for indoor unit of window/Split Air conditioner of cap 1.5/2 TR complete all as specified and directed by Engr-in-charge complete all as specified and directed by Engr-in-charge.

S&F running capacitor clip type of cap. 50/2+4+6 MFD, 240 volts 50 cycles for window type/Split type air conditioner 1.5/2.0 TR complete all as specified and directed by Engr-in-charge.

S&F Over load protector with relay for 1.5/2.0 Ton cap for window/Split type AC complete all as specified and directed by Engr-in-charge.

S&F Thermostat switch for window/Split AC cap 1.5/2.0 TR complete all as specified and directed by Engr-in-charge.

S&F Blade of condensing fan motor for window/split type (outdoor unit) AC cap 1.5/2.0 TR complete all as specified and directed by Engr-in-charge.

S&F Display unit for 1.5/2.0 Ton Split/Window AC complete all as specified and directed by Engr-in-charge.

S&F blower motor of indoor unit of split type of cap 1.5/2.0 TR complete all as specified and directed by Engr-in-charge.

S&F Compresser Capacitor as per existing for 1.5/2.0 Split type AC complete all as specified and directed by Engr-in-charge.

S&F Drain pipe as per existing for 1.5/2.0 Split type AC complete all as specified and directed by Engr-in-charge.

Supply and fix voltage stablizer for automatic operation single phase naturally air cooled indoor type having low and high voltage cut-off protection, inbuilt thermal protection & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% and of capacity of 5 KVA wall mountable.complete all as specified and directed.Make: Blue bird/microtech.

Supply and fixing new hermetically sealed compressor suitable for Refrigerator of capacity 310 Ltrs complete including accessories and cleaning , vaccumizing ,gas charging of adequate qty in the unit and soldering/ brazing of suction and discharge pipes complete all as specified and directed by Engr-in-Charge.

All as per item No 40 above but for Refg of capacity 280Ltrs.

All as per item No 40 above but for Refg of capacity 220 Ltrs.

All as per item No 40 above but for Refg of capacity 180/190 Ltrs.

S & F cooling coil of Refrigerator Capacity 280/310 Ltrs including connected works complete all as specified and directed by Engr-in-charge.

S & F cooling coil of Refrigerator Capacity 180/220 Ltrs including connected works complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Refrigerator of 310 ltrs size including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Refrigerator of 280 ltrs size including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Refrigerator of 220 ltrs size including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in Refrigerator of 180/190 ltrs size including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Supply and fixing new hermetically sealed compressor suitable for Deep Freezer of capacity 500 Ltrs complete including accessories and cleaning , vaccumizing ,gas charging of adequate qty in the unit and soldering/ brazing of suction and discharge pipes complete all as specified and directed by Engr-in-Charge.

All as per item No 50 above but for D Freezer of capacity 300 ltrs complete all as specified and directed by Engr-in-charge.

All as per item No 50 above but for D Freezer of capacity 200 ltrs complete all as specified and directed by Engr-in-charge.

Material & labour for charging of refrigerant gas in D freezer of any size including pressure/leak testing etc complete all as specified and directed by Engr-in-charge.

Supply and fixing Starting Capacitor mfd 80-100 Mfd D freezer complete all as specified and directed by Engr-in-charge.

Supply and fixing Running capacitor 10 to 20 Mfd for 'D' Freezer complete all as specified and directed by Engr-in-charge.

Supply and fixing over load protector suitable for Deep freezer, Water Cooler and Refrigerator complete all as specified and directed by Engr-in-charge.

Supply and fixing Thermostats switch Suitable for D freezer and Refrigerator complete all as specified and directed by Engr-in-charge.

Supply & Fixing in Replacement of Fan motor of capacity 1/6 HP,1400 RPM, three speed suitable for desert cooler complete all as specified and directed by Engr-in-charge.

Supply & Fixing in Replacement of Submersible water pump (Tullu pump) single phase ,220 V for desert cooler complete all as specified and directed by Engr-in-charge.

Supply & fixing Wood wool pad for desert cooler of any size complete set of three superior quality as approved by Engr-in-Charge.

M&L for Removing Old paint of Desert Cooler internally and externally, preparing new galvanized surface for painting and applying two coats of synthetic enamel paint over a coat of red oxide using spray gun complete all as directed by Engr-in-Charge.

Supply and fixing PVC pipe ( 15 mm ) with PVC elbow and water distributor for desert cooler complete all as specified and directed by Engr-in-charge.

Supply and fixing Starting capacitor 4 mfd heavy duty for desert cooler complete all as specified and directed by Engr-in-charge.

Supply and fixing Metal Clad Industrial Plug & Socket 2 Pole + Earth 220 Volts for Acs complete all as specified and directed by Engr-in-charge.

Supply and fixing PVC connection of 15mm bore & 600 mm length for connecting main pipe line suitable for Desert cooler with PTMT complete all as specified and directed by Engr-in-charge.

Supply and fixing sheet Metal enclosure with socket plug top and MCBs 20 Amp single pole (AC box) complete all as specified and directed by Engr-in-charge.

M&L for repair/replacement of cooling coil copper type of Split/window type AC 1.5 Ton including connected work complete all as specified and directed by Engr-in-charge.

M&L for repair/replacement of condenssor coil copper type of Split/window type 2.0 Ton AC including connected work complete all as specified and directed by Engr-in-charge.

All as per Item No.70 here-in-before but exhaust fan of size 220/250/300/380/450 mm sweep.

All as per item No 72 here in before but exhuast fan 220/250/300/380/450 mm sweep complete all as specified and directed and marking MES number ass as directed by Engr-in-Charge

Supply and fixing in replacement of PCB (Panel circuit board) suitable for BLDC ceiling fan of 1200 mm sweep ISI marked duly housing in side ceiling fan body after taking down and fixing the ceiling fan after serviceble position complete all as specified and directed.

Supply and fix ball bearing with bush number of 6201/6202/6203/6204 as required complete all as specified and directed. (Make : SKF/NBC).

S&F for Condenser 2/2.5/3.15.4.0 MFD with PVC housing as per existing capacity and make as per sample and confirming to ISI complete all as specified and directed. (Make :Havells/Usha)

S&F for rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan 1200mm/1400mm sweep.

S&F for twin core twisted copper flexible wire/cable of size 23/0.0076 complete all as specified and directed (Make : Finolex/Nicco/KDK/KEI/Havells/HPL)

Supply and fix canopy top/bottom with U clamp suitable for ceiling fan 1200/1400mm sweep suitable matching color as exising complete all as specified and directed

Supply and fix rod 300 mm long of size 20 mm dia for ceiling fan complete all as specified and directed.

Supply and fix ceiling fan blades suitable for 1200/1400 mm sweep suitable for exising make & type as per sample complete all as specified and directed.

Supply and Fix exhaust fan Louvers MS suitable to size as per exising fans 220/250/300/380/450 mm complete all as specified and directed

Please Enable Macros to View BoQ information