SPECIAL REPAIRS TO BLDG NO. P-195 AT MIL STN UDAIPUR UNDER AGE (I) UDAIPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed by Engr-in-charge.

Taking down wooden chowkats or frames with shutter area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and directed by Engr-in-charge.

Taking down wooden chowkats or frames with shutter area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and directed by Engr-in-charge.

Taking down steel windows with shutters area exceeding 1.5 Sqm each, from wall fixing complete all as specified and directed by Engr-in-charge.

Taking down aluminium ventilators with shutters area not exceeding 1.0 Sqm each, from wall fixing complete all as specified and directed by Engr-in-charge.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engr-in-charge.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-charge.

Material & Labour for Non - skid White Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Material & Labour for White Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed by Engr-in-charge.

M&L machine cut Udaipur Green marble stone slab 18-20 mm thick mirror polished laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick cement screed bed in CM 1:3 as in stairs trades/riser, window sill etc including rounding of edges at nosing. complete all as specified and directed by Engr-in-charge.

Material and Labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base/levelling coarse and finished the top surface even and fair complete all as specified and directed by Engr-in-charge.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including cement screed bed 15 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, and half nose moulding (bull nosing) etc,complete all as specified.

All as per item above but pre-polished kota stone as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified and directed by Engr-in-charge.

Material & Labour for 75 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. complete all as specified and directed by Engr-in-charge.

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-charge.

Supply and fixing for PCC coloured interlocking ( glossy finishing) paver blocks confirming to IS-15658-2006 of 60 mm thickness, M-35 grade as in hardstanding etc. laid over and including 50 mm thick bedding layer of sand, complete all as specified and directed by Engr-in-charge.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. complete all as specified and directed by Engr-in-charge.

Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), Complete all as specified and directed by Engr-in-charge.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. Complete all as specified and directed by Engr-in-charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, Complete all as specified and directed by Engr-in-charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately).

Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed Complete all as specified and directed by Engr-in-charge.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised Complete all as specified and directed by Engr-in-charge.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed Complete all as specified and directed by Engr-in-charge.

S&F 100 mm long stainless steel butt hinges medium weight with galvanised MS hinge pin etc. Complete all as specified and directed by Engr-in-charge.

S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long Complete all as specified and directed by Engr-in-charge.

S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber Complete all as specified and directed by Engr-in-charge.

Supply & Fixed in repairs aluminium Hat and coat hooks, solid body, 175mm to 250 mm Complete all as specified and directed by Engr-in-charge.

Supply & fixed in repairs MS helical door spring 300 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats. Complete all as specified and directed by Engr-in-charge.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CEJZ TD -20 sheet 1/3 to 3/3 as applicable Complete all as specified and directed by Engr-in-charge. Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Supply & fixed Powder coated aluminium windows/ventilator/partition etc fixed/openable type or sliding without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc Complete all as specified and directed by Engr-in-charge.

Supply & fixed for anodised aluminium grill of (anodised transparent or dyed to required shade according to IS:1868 with minomum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumiinium standard section around the opening, Complete all as specified and directed by Engr-in-charge.

Supply and fixing stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. Complete all as specified and directed by Engr-in-charge.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane Complete all as specified and directed by Engr-in-charge.

Supply & fixed steel for 4mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane Complete all as specified and directed by Engr-in-charge.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample Complete all as specified and directed by Engr-in-charge.

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair. Complete all as specified and directed by Engr-in-charge.

Supply & fixing of stainless steel decorative finial (round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie Complete all as specified and directed by Engr-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition, Complete all as specified and directed by Engr-in-charge.

Material and labour for RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in beams,cantilevers, bressummers, lintels over 1.5m span etc including necessary formwork Complete all as specified and directed by Engr-in-charge.

Material and labour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, Complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for old angle iron, Complete all as specified and directed by Engr-in-charge.

Supply and fixing for mild steel framed angle iron work as in fixing of cooler stand by drilling/cutting the stone masonry wall and fixing, other section of grade Fe-290-Gde E-165 complete all as specified and as directed by the Engr-in-Charge.

Demolition cement concrete in any position for existing roof PCC Complete all as specified and directed by Engr-in-charge.

Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately Complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc Complete all as specified and directed by Engr-in-charge.

Material and labour providing and applying roof treatment as folowing stages :- (i) Apply 1st coat of PU coating (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent by brush/roller/spray. Spread non-woven geo-textile or glass fiber tissue of 45 GDM with overlaps of 50mm in both directions when the surface is still tacky, this is optional , to be assessed as per site requirements to acheive higher mechanical properties. (ii) Allow 1st coat to dry for 10-12 Hrs. (iii) Apply 2nd coat of PU membrane (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent) as per manufacturer's instructions. Extend waterproofing treatment up to 200mm and terminate into groov on the parapet wall. (iv) Protect the applied liquid membrane bu sprinkling sand @ 200gm/Sqm over the final coating when the surface is still tacky to facilitate plastering and including 25mm thick plastering in CM 1:3 with admixture and WPC. Complete all as specified and directed by Engr-in-charge. Note 1 : Treatment shall be done through authrised representative of manufacturer's instructions. Note 2 : Dismanteling/removal of APP membrane and other treatment of roof includes as rate quoted by contractors, no extra amount paid on this account.

Taking down cement plaster from brick/stone walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc Complete all as specified and directed by Engr-in-charge.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement Complete all as specified and directed by Engr-in-charge.

Material and Labour for 15mm thick rendering on fair faces of brick work/stone masonry, concrete surfaces (external walls) or stone walls upto tripple storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, Complete all as specified and directed by Engr-in-charge.Note : (i) WPC shall be measured and paid separately.

Material and labour 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement Complete all as specified and directed by Engr-in-charge.

Supply only liquid water proofing compound, ISI marked Complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, Complete all as specified and directed by Engr-in-charge.

Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing Complete all as specified and directed by Engr-in-charge.

Material & Labour for preparing new plastered surfaces and applying two coats of white wash on ceiling Complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg Complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered or un-plastered surface applying Two or more coats of 100% Premium acrylic emulsion paint (Weather Proof Paint) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces Complete all as specified and directed by Engr-in-charge.

Material and labour for preparation of old Plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat white wash Complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick rendering on concrete surfaces of roof projection cornices & chajja etc finished fair and even without using extra cement including WPC in CM 1:4 incl taking down existing cement plaster and including necessary arrangements to work on roof projection, cornice & chajja etc. Complete all as specified and directed by Engr-in-charge.

M&L for two coat of synthetic enamel painting to new steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer Complete all as specified and directed by Engr-in-charge.

Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore Complete all as specified and directed by Engr-in-charge.

Supply & fixed Polymer coloured (Polypropeylene Delrin and ABS) low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscription mark with 2731 with and including suitable size of MS brackets, plug, screws all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type Complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Wash basin, vitreous China (flat back or angle back type) size 570 x 445 mm including waste coupling and brackets etc. Complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs vitreous china premium quality/1st quality wash down water closet pan (pedestal pattern), white (excluding flushing cistern & flush pipe) & incl 01 No ‘P’ or ‘S’ trap of dia 100mm including provn of lime concrete bedding, Complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair plastic water closet seat cover with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing Complete all as specified and directed by Engr-in-charge.

Supply & fixed in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs, Urinal spreader of Brass chromium plated for fixing with 15 mm dia pipe., Complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs,15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks, Complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair, bib tap screwed down high pressure, chromium plated cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, Complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore concealed stop valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union Complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges Complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repair rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position Complete all as specified and directed by Engr-in-charge.

S & F in repair gun metal globe/gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia Complete all as specified and directed by Engr-in-charge.

S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes Complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. Complete all as specified and directed by Engr-in-charge.

All as item above but 20mm bore, Complete all as specified and directed by Engr-in-charge.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire Complete all as specified and directed by Engr-in-charge.

Material & Labour Steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, Complete all as specified and directed by Engr-in-charge.

Supply and fixing (in repair) angle cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, Complete all as specified and directed by Engr-in-charge. (Note : Weight of cock shall not be less than 0.575kg)

Supply & fixed in repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends Complete all as specified and directed by Engr-in-charge.

Supply & fixed in repairs stainless steel grating openable 100mm dia without hole including fixing with white cement Complete all as specified and directed by Engr-in-charge.

Supply & fixed in repairs stainless steel grating openable 100mm dia with hole including fixing with white cement Complete all as specified and directed by Engr-in-charge.

Supply & fixed in repair fancy type shower rose125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint Complete all as specified and directed by Engr-in-charge.

Supply & fixed in repair glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long Complete all as specified and directed by Engr-in-charge.

S & F for CP brass Soap Dish Holder, Complete all as specified and directed by Engr-in-charge.

Dismantling of cast iron or reinforced concrete drain pipes, 75mm/100mm dia jointed in cement mortar and taking out Complete all as specified and directed by Engr-in-charge.

S&F 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor Complete all as specified and directed by Engr-in-charge.

S&F 75mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor Complete all as specified and directed by Engr-in-charge.

S&F 110mm dia UPVC (SWR) bends any radius including cutting of holes. Complete all as specified and directed by Engr-in-charge.

S&F 75mm dia UPVC (SWR) bends any radius including cutting of holes. Complete all as specified and directed by Engr-in-charge.

S&F 75mm dia UPVC (SWR) floor trap, plain with grating including jointing with solvant cement Complete all as specified and directed by Engr-in-charge.

S&F UPVC (SWR) gully trap 125/110 mm setting and jointing with solvant cement Complete all as specified and directed by Engr-in-charge.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. Complete all as specified and directed by Engr-in-charge.

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonrty wall surface with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch. Complete all as specified and directed by Engr-in-charge.

(a) One light point controlled by one switch with cables 1.5 sqmm size.

(b) One fan/ exhaust fan point controlled by one switch with cables 1.5 sqmm size. .

(c) One 3 pin socket outlet, 5 amps on the same board with other switches, with cables 1.5 sqmm size.

(d) One 3 Pin socket oulet 5Amps on indepndent, with cables 1.5 Sqmm size

(f) One 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4.0 Sqmm size

S&F switch piano flush type single pole one way 5/6 Amps. Complete all as specified and directed by Engr-in-charge.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including dismantling old one. Complete all as specified and directed by Engr-in-charge.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Complete all as specified and directed by Engr-in-charge.

S&F of switch piano 15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one.

S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one. Complete all as specified and directed by Engr-in-charge.

S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Complete all as specified and directed by Engr-in-charge.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. Complete all as specified and directed by Engr-in-charge.

S&F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 Complete all as specified and directed by Engr-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size Complete all as specified and directed by Engr-in-charge.

M&L MCB SPN DB comprising of sheet metal enclosure single door suitable for mounting MCB 240 Volts with busbar 200 amps rated 8 way including dismantling old one. Complete all as specified and directed by Engr-in-charge.

S&F MCB TPN 63 Amps 415V 10KA 'B' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection testing and commissioning. Complete all as specified and directed by Engr-in-charge.

S&F RCBOs Double pole, 30mA 32 Amp rating for earth leakage, overload & short-circuit protection. Complete all as specified and directed by Engr-in-charge.

Supply and fixing SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Complete all as specified and directed by Engr-in-charge.

Supply and fixing SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Complete all as specified and directed by Engr-in-charge.

Taking down carefully, deposited to MES store and rehanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan Complete all as specified and directed by Engr-in-charge.

Excavating in trenches n.exc 1.5 m width and n.exc 1.5m in depth for taking out cable and cable cover and getting out in any type of soil Complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm. Complete all as specified and directed by Engr-in-charge.

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point Complete all as specified and directed by Engr-in-charge.

M&L for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Complete all as specified and directed by Engr-in-charge. Note :- For the purpose of payment only punned thickness will be measured.

Supply and laying reinforced precast concrete cable cover, class LV, type 1 flat, 250mm x 150mm x 40mm. Complete all as specified and directed by Engr-in-charge.

Material & labour for taking out old GI Pipe 50mm dia from trenches and removing from site Complete all as specified and directed by Engr-in-charge.

Supply and fix medium grade 50 mm dia GI pipe fix complete to wall , poles etc with suitable clamp for protection of cable Complete all as specified and directed by Engr-in-charge.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 core. Complete all as specified and directed by Engr-in-charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead Complete all as specified and directed by Engr-in-charge.

S&F Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x2.5sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. Complete all as specified and directed by Engr-in-charge. Note : Two run of 2.5 sqmm cable with colour code of R, Y & B for phase/ neutral and one run of same size cable with Green colour as earthing for socket point alongwith required PVC conduit and connected items will be measure as one RM.

S&F Submain wiring alongwith earth wire with the following sizes of 2x4.0 sqmm + 1x4.0 sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. Complete all as specified and directed by Engr-in-charge. Note : Two run of 4.0 sqmm cable with colour code of R, Y & B for phase/ neutral and one run of same size cable with Green colour as earthing for socket point alongwith required PVC conduit and connected items will be measure as one RM.

M & L for scrapping out old rusted and corroded sufaces to making good surface of iron body/CRCA sheet main DBs of any shape & size for external and internal surface and preparing the exposed surfaces & applying two coat of aluminium paint paint over a coat of red oxide zinc crome primer Complete all as specified and directed by Engr-in-charge.

S&F LED security light luminaries of 35 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 2.5 sqmm stranded copper conductor of suitable length Complete all as specified and directed by Engr-in-charge.

Taking down carefully, depostied to MES store and refixing at the same place electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25/50 litre as existing complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Complete all as specified and directed by Engr-in-charge.

M/s Ajay kumar Garge (BID ID -3410976)

m/s sharma constructions (BID ID -3417558)

M/s SUNIL ENTERPRISES (BID ID -3417538)