Empanelment of Vendors to undertake the development works as described (Neon Arch Lighting, Heritage Plaque Installation, Heritage Theme Wall, Sculpture Installation) at different location 2nd call

RCC Foundation Block - Concrete footing for stabilityM25 grade RCC (1.8 m × 1.8 m × 0.75 m)

Pedestal Brick Masonry Core - Brick structure base above RCC foundation Brick masonry + cement (1.5 m × 1.5 m × 1 m)

Red Sandstone Cladding on all 4 sides and top of pedestal Dholpur Red Sandstone 1.5 m (W) × 1.75 m (H) × 4 sides + top

Corten Steel Panel (Main Signage Body) - 5 mm thick Corten Steel (0.9 m (W) × 3.0 m (H) × 4 sides

CNC Cut Lettering Area - Laser cutout area for backlit text on all sidesCNC Cut (within Corten) 0.8 m × 2.8 m × 4 sides

Internal Lighting - LED Backlight - Waterproof LED strips behind cut letters for night visibility LED strip + diffuser Full perimeter behind letters (~40 m)

Internal Framework (Support Frame)MS angle iron frame for corten sheet and lighting installation MS angle 50×50 mm Perimeter frame (3m height × 0.9 m width × 4)

Logo & "Agra Municipal Corporation" Text Bottom branding in LED-lit acrylic on pedestal Laser-cut acrylic + LED (1.2 m × 0.4 m)

Electrical Wiring & Power Connection - Wiring for LED lights, external waterproof junction box Copper wire + PVC conduit

Paint Finish (Corten Protective Coating) - Clear lacquer on corten sheet after rusting Epoxy/Clear PU Coating

Fixing Materials (Anchor bolts, adhesives) - All required fixing hardware for structure and cladding (Bolts, clamps, cement grout)

Main Frame Structure -Supporting framework for signage -Mild Steel (MS) hollow sections Rust-proof coating applied Note - As per overall size 15 ft (W) × 8 ft (H) × 1.5 ft (D)

Front Panel - Decorative metal CNC cut panel with cityscape design on acrylic transparent sheet

Side &Back Panel - Light-diffusing panel for backlit effect5 mm opal acrylic sheet

Lighting System - LED strip lighting (IP65 waterproof) LED with PVC housing - Continuous length to cover perimeter

As per structural requirement

Electrical Wiring - Concealed power supply and connectionsCopper wire with PVC insulation - As per electrical layout

Finish & Coating - Weather protection and aesthetics . Powder coating, UV-resistant

Fixing Materials (Anchor bolts, adhesives) All required fixing hardware for structure and cladding (Bolts, clamps, cement grout)

Gobo Projectors (Ceiling Mounted - 60W, IP65, RGB Custom Gobo Filters (Tricolour or Cultural Motifs) As per Design

Green Landscaping + Planters (Shrubs, Soil, Pots) As per Design

MS Brackets for Ceiling Mounting + Safety Cables

Miscellaneous & Installation - Heritage Content Design Fee

MS Pipe for Arch Frame Mild Steel (IS 1161), 75 mm dia, 3 mm thick Length per arch: ~4.2 m curved

Neon Flex LED Strip Light (Length per arch: ~3.5 m)

RCC Foundation Block for Arch BaseRCC M20 with anchor bolts

Anchor Bolts and Base Plate Assembly MS Plate 200×200×8 mm with M16 anchor bolts

PU Paint Coating PU-based Exterior Grade Paint Primer + 2 coats of PU enamel on MS surface Use red, white, or theme color as per design

Power Supply Unit (SMPS) IP67 24V SMPS, 200W-300W Suitable for 4–5 arches Weatherproof enclosure mounted nearby

Electrical Cable (24V DC Wiring) Copper, 2-core, 2.5 sq.mm, FRLS, armored Mainline cable: ~100 m (looped through all arches)

Lighting Timer/Sensor Digital Timer or Photo Sensor Switch

Miscellaneous & Installation

Heritage Content Design Fee

White marble Plaque Panel (Mounted over Brick Wall) Stone plaque with engraved text Front and Back Cladding Only 0.90 × 1.20 (×2 sides)

Work White marble Decorative Band with Inlay Work cFront and Back (1.00 × 0.15 × 2) Left and Right (0.30 × 0.15 × 2)

White marble Intermediate Block All sides except bottom 0.90 × 0.40 × 2 + 0.25 × 0.40 × 2

Lower Pedestal Block All sides except bottom 1.00 × 0.35 × 2 + 0.40 × 0.35 × 2

White Marble Platform Base (Top Finish)1.20 × 1.00 × 0.05 m

LED Spot Lights (IP65, warm white beam)

Brick Masonry Internal core for entire vertical structure

MS Framework (for panel support) 40x40x5 mm angle welded frame

Laser-cut MS Sheet (3 mm thick), Panels of 2.4 m × 1.2 m approx. fitted in MS frame Corten-look finish; engraved designs - 42 panels (2.4 m × 1.2 m)

Backlit Illumination Fixtures - Flexible IP67-rated LED strip (24V) Warm white, 14–18 W/m, aluminum channel mounted behind sheet Installed around cut-out areas behind panels for glow effect

Illumination Fixtures (Front) Outdoor LED wall washers (IP65)Warm white, 15–20 W per fixture, beam spread 30–45° Mounted on ground in front planter for full wall wash

Engraved Heritage Artwork - CNC Engraving / Laser Cut - As per panel design

Raised Green Planter Base - RCC with artificial turf and edge curb Width: 500 mm, Height: 300 mm

Electrical Cabling & SMPS Unit - Copper 2.5 sq.mm + 24V SMPS (IP-rated) Each SMPS handles ~10–12 m strip or 10 fixtures - 250 m cable, 5–6 SMPS unit

Sculpture Work- GRC/ Fiber resin with cold-cast bronze/metal coating (1.00 m x 0.75 m x 1.70 m) Thickness of shell: 10–20 mm

Pedestal & Foundation - Brick masonry pedestal base (1.50 m x 0.90 m x 0.90 m)

Red sandstone cladding (4-side + top)

PDLC Smart Film

Cubicle Frame Structure - Corrosion-resistant aluminium frames with glass fixing supports

PVC Coated Tensile Fabric

MS Hollow Pipe, 150mm dia, powder coated

Western-style commode with basic flush and urinal

Ceramic basin with sensor tap + soap dispenser

Electrical & Plumbing Work - Wiring, panel board, pipe connections, drainage

Smart Glass Controller & Sensors - Presence detector + switchable glass controller

Lighting & Ventilation System - Sensor-based LED lights + exhaust fan

Control Panel with Battery Backup - Central smart controller + 4-hour UPS backup

Front stone plaque/signage with engraving (0.60 m x 0.45 m)

Electrical & Lighting LED Spotlights (IP65, warm white beam)

Electrical cabling, earthing, junction box

Anti encroachment Bollards (GI Pipe based)