Construction of Brick Chamber and attending Electrical, water supply arrangments and Motor repairing work to the Meyyanoor MCC Centre in Div. No 18 Suramangalam Zone-1,Salem City Municipal Corporation

Amount

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete .

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Plastering with cement mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete .

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and Run of 2 of 4 sq. mm PVC insulated SC unseathed FRLS copper conductor of 1100 v grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire painting of suitable colour ( SD-56)

Supply and Run of 4 of 4 sq. mm PVC insulated SC unseathed FRLS copper conductor of 1100 v grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire painting of suitable colour ( SD -60)

Supply and Run of 3 of 4 sq. mm PVC insulated SC unseathed FRLS copper conductor of 1100 v grade in suitable flexible conduit pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire painting of suitable colour ( SD -48)

Supply and clamping of 4×16 sq. mm PVC LTUG armoured cable ( SD -199)

Supply and clamping of 4×35 sq. mm PVC LTUG armoured cable ( SD -201)

40 mm dia 10kg per cm2 PVC Pipe (M-0878 Twad 24-25) suitable for 4×16 sq. mm PVC LTUG armoured cable

40 mm PVC Bend (M- 0896)

4 Pole Sheet steel enclosures for MCB's( M-1800 Twad-24-25)

Supply of Miniature circuit breakers 240V / 415V 50Hz-AC supply suitable for both Lighting and Motor load-Higher End -Four pole 63A, 10 KA

6 A-230V Switch 1W -1 Module. ( M-1415)

16A -230V Switch 1W-1 Module. ( M -1420)

18 M Combined cover plates (M-1495)

48W LED Street light fitting with LED (M -1291)

Earthing arrangements with GI Earth plate including charcoal and salt with necessary excavation in all soils and to full depth as per may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

Fabrication & supply of MV cubical panel vermi proof box of MS sheet 20 SWG powder coated, door with 180 degree opening, poly urethane/rubber gaskets as per IE Rules-1m2. Projection of 0.45 m (TWAD 23-24 P-140 )

Motor Repair work

Charges for repair and reconditioning of Cutting Machine with replacement of P-213 Ball Bearing- 2 nos, B74 Belt-2 nos, Sharpening the cutter blades including labour, transport and all cost conveyance

Water Supply items

25 mm 10 kg per cm2 PVC Pipe ( M-0876)

75 mm 6kg per cm2 PVC pipe (M-0869)

75 mm PVC Elbow (M-0939)

75 mm PVC T Joint (M-0947)

75 mm PVC End cap

110 mm 6 kg Per cm2 PVC pipe ( M-872 )

110 mm PVC Elbow ( M- 0941)

110 mm PVC T Joint (M – 0949)

Charges for removing of damaged PVC Pipes, Elbow and T joint and Refixing of 75 mm PVC Pipe, 75mm Elbow, 75 mm T joint including Plastering with cement mortar 1:3 mix work and all cost conveyance etc.

Painting of Machinery

Charges for Painting with two coats Enamel paint to the Cutting Machine, Conveyor platform and all cost conveyance etc.

ROLLING SHUTTER SERVICE

Charges for servicing of Rolling Shutter with replacement of 00 kg×600 mm size - 4 Nos of Spring, 4 nos of Bearing wheel,Gear box wheel,including labour, Scaffolding and all cost conveyance etc.

Electrical items

20W 4 Feet LED Fitting with LED

80W LED Focus Light Fitting with LED

Supplyandfixingof1200mm(48")sweepACceilingfancompletewithsteppedelectronic300Wregulatorwith1metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

5 HP Three Phase DOL Starter

SWETHALAKSHMI ENGINEERING (BID ID -1262728)