SPL REPAIRS TO DAMAGED FLOORING OF OFFICERS MD ACCN (BLDG NO P-47, P-93, P-102, P-109, P-276, P-277, P-358 AND P-359) AND SAILORS MD ACCN (BLDG NO P-25, P-31, P-178, P-251 AND P-253) AT INS SHIVAJI LONAVLA

Amount

Dismantling stone slabs and tiles of any descritpion or thickness in floors laid bedded in any mortar complete all as specified and directed.

Dismantiling of floor, hearth or wall tiling including cement mortar bedding complete all as per specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (desined pattren) (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors / dado laid over 15mm thick screed bed in CM 1:6 . set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (desined pattren) (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors laid over 15mm thick screed bed in CM 1:6 . set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for complete removal of existing treatment of old painted wall surfaces and praparing and applying two coat of oil bound distemper over alkali resistance primimg paint primer over 3.00 mm thick white cement based wall care putty where as required for smooth finish etc of approved make & shade on walls and other places complete all as specified and as directed.

M & L for Preparation of old painted wood surfaces of any description having width/girth execcding 10cm and apply two coat of synthatic enamel paint complete all as specified.

M&L for Preparation of Old steel surface of steel and applying two coats of synthetic enamel paint

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutter from the frame) and removing to store.

S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed.

S&F factory made PVC double door frame of size 50 mm x 95 mm made out of 5 mm single side prelaminted PVC sheet reinforced with MS Square tube all as specified and as directed .

S&F for Factory made Moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness,lipped with 15 mm (5mm x 3) thick x30 mm width on the other stiles & bottom rails & 10mm (5mm x 2) thick x 30 mm width on other stiles & bottom rails , The inner panel laminated with 2 mm thick termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC Lipping and manufacturer's specification & drawing etc, complete all as specified and directed.

S&F for 30 mm thick Factory made fully glazed solid PVC Door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for stile and 15 mm x 15 mm for top, lock and bottom rail MS frame shall have a coat of steel primer of approved make and manufature MS frame shall be covered with 5 mm thick heat moulded PVC C channel of size 75 mm x 30 mm x 50 mm out of which 10 mm shall be bent at 90 degree towards inner side on front face of the door forming stile, for Top and Bottom rail MS frame shall be covered with 5 mm thick, 100 mm wide PVC sheet out of which 10 mm shall be bent at 90 degree towards inner side on front face of the door. MS frame at Lock rail shall be coverved with 125 mm wide PVC sheet out of which 10 mm both the adjust shall be bent at 90 degree on front face of the door and 75 mm wide PVC sheet shall covered the MS frame at top lock and bottom rail on back side of the door 5mm thick 20 mm croos PVC sheet as gap insert for Top and Bottom rail. PVC sheet beading of 10 mm thickness (5 mm x2), 25 mm wide to be stuck internally in the front face of the stiles and rails of the doors and 10 mm thick ( 5mm x 2), 15 mm wide and PVC sheet beading to be stuck internally in the back side of the stiles and rails of door with solvent cement adhesive,stainless steel wire mess will be fitted exteranlly in the clear face availabe between the stile and rails and fixed between PVC sheet of stiles and rails bent at 90 degree on front face 15 mm x 10 mm, 'L' shape outer beading nailed on stiles and rails at the back side so that the 'L' shape PVC beading can be removed when required for replacement of broken wire mess etc and manufacturer's specification & drawing etc, complete all as specified and dir

Supply and fix aluminium alloy anodised Aldrop sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 300 mm fixed at any position all as specified and directed.

S&F in stainless steel butt hinges, 100mm, medium weight complete all as specified and directed

S&F in extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed.

S&F in aluminium, anodised, barrel tower bolts of extruded section of size 200mm complete all as specified and directed.

M&L for Vitrified tiles of any shades 8-10mm thick (square/rectangular) polished, area of each tile n.exc 0.36 sqm, in floors, skirtings etc laid over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specifed and as directed.

DURGA ENTERPRISES

M/s S.D Construction Co

VIJAYA ENTERPRISES

SAI SAMARTH ENTERPRISES

JADHAV CONSTRUCTION AND INFRASTRUCTURE