Replacement of Gypsum partition with brick masonry wall and Providing Electrical shaft shutter in all Nursing rooms of Asha Niwas Hostel

Amount

REMOVING GYPSUM PARTITION WORK: Labour charges only for carefully removing and taking out existing gypsum partitions, etc. at all floor levels and locations including removing the existing fittings and fixtures, locking arrangement, and handing over the same to ACTREC all complete as directed by Engineer-In-Charge.

BRICK WORK: Brick work at all floor level with cement mortar 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level simultaneous and as directed by engineer in charge. In foundation & plinth drain walls chambers & superstructure of all floor levels.

WATERPROOF PLASTER: Providing and laying waterproof cement plaster 20mm in two coat backing coat of 12mm thick in CM 1:3 and a second coat of 8mm thick in CM 1:3 finish including supplying and adding the waterproofing compound weight of cement at all floor levels for repair to chambers, manholes, water retaining structures, depressions in bath/WCS, etc. in quantities as required at the site including scaffolding, curing layer will be allowed to air cure for 4hours followed with water curing for 48 hours, hacking of concrete surface, etc. complete all as directed by engineer-in-charge (to maintain bone dry condition underneath for 10 yrs) The rate includes preparation of surface, treatment, and sealing of all joints, corners, junctions of pipe sand masonry with polymer mixed slurry. (Rates also include disposing/taking away the debris outside the premises of ACTREC and disposing as per the statutory guidelines)

STRUCTURAL STEEL WORK: At all levels including supplying cutting fabricating welding or blotting erecting and fixing in position including painting with a primary coat of approved steel primer, including the cost of materials labour with chasing in the wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge. Steel work in built-up tubular trusses including cutting, hoisting, fixing in position, and applying a priming coat of approved steel primer and two coats of synthetic enamel paint (Oil Paint), welded and bolted including specially shaped washers, etc. Complete: Hot finished welded type tubes.

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws and copper key lock with 2 additional keys etc. complete (Copper oxidised as per IS 1378): 90 mm

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in-charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge.

Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete: 100x58x1.90 mm

Providing and fixing aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws, etc. complete : 100 mm

VISHAL NIRMAL DUBE

S R DEVELOPERS

NALANDA DECOR

RAJSHREE CONSTRUCTION CONSORTIUM