PETTY REPAIRS FOR DAY TO DAY SERVICES IN DEPOT AND ADM AREA AT JINDRAH UNDER GE ARMY DHAR ROAD

Amount

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced or major repair shall be paid under respective items.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Cleaning of sewage line upto first man holes blockage of WC, EWC, Bathroom, floor trap of WHB/Kitchen pipe etc complete all as specified and directed.

Cleaning of sludge from the manholes by taking out loose sediment sand,girt,ash,sludge water, rags ,fibres or vegetation from including removal of sludge/debris to a distance exc 250m but n exc 500m and buried under ground complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but not exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

Taking down shutters of any description exc 2 sqm each complete all as specified and directed.

S & F steel window ( box type ) glazed and gauged using ERW hollow 'P' section double frame jointed internally with 25x3mm complete as per TD- 219(c) sheet 1/3 to 3/3 with side hung shutter including butt binges, steel handles and steel peg stay, towel bolt & guard bars complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and as directed.

S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing etc., Fe-410 W Gde E-250 quality 'B' complete all as specified and directed

S & F mild steel sheet 1.25 mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc., as required complete all as specified and directed

S & F pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F factory made shutters second class hardwood rails and style 35 mm thick shutters plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically presurre treated complete all as specified and directed.

S & F factory made second class hard wood shutter, 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F 100 mm hasp and staples safety type, of aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed

S & F in repairs 100 mm hasp and staples safety type, of aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed

S & F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F 75 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F in repairs 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F in repairs 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed.

S & F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F in repairs 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

S & F 200mm long aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F 100 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F in repairs 200mm long aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S & F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, hooks stay, heavy, for large gates, hook pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L Providing Cement concrete Type B1 1 : 2 : 4 (20mm graded aggregate) as in roof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S & F sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed (reglazing shall be measured separately)

S & F in repairs sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F in repairs curtain Harrison rails, mild steel, chromium plated 18-20 mm dia with fixing brackets, stops, rollers etc,. complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one priming coat of pink primer complete all as specified & directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for running welding in repairs, Thickness of metal to be welded N exc 6mm, complete all as specified and as directed.

S & F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and as directed.

M & L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, including teak wood lipping 19 x 6mm thick fixed with nails complete all as specified and directed.

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and directed.

S&F 100mm long fancy type Brass handles, cast type, polished bright complete all as specified and directed.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed.

Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed.

Resecuring or easing & adjusting shutters of any description n exc 1 sq. m each, without taking down shutters complete all as specified and as directed.

M&L for taking down shutters of any description exceeding 1 square metre and n. exc 2 Sqm each and refixing in the same opening complete all as specified and as directed.

M & L for taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

M & L for taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for 15mm bore (concealed) `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets incl 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

M & L for 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F in repair Swan Neck, Left Hand Operating Knob Pillar Tap of 15mm bore dia, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm brass chromium plate mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed

S & F in repairs wall mixer brass chromium plated hot and cold as specified and directed.

S & F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as direced.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed

S & F in repairs plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed

S & F in repair jet spray CP with flexible pipe complete all as specified and directed

S & F in repairs 10 litres flusing cistern and flushing pipe (exclusive of brackets), including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and including flush pipe of PVC 32 mm dia pipe 600 mm long complete all as specified and directed.

S & F in repairs stop valve, 15 mm bore dia cast copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified & directed.

S & F in repairs 15 mm bore dia fancy type, stop valves, chromium plated, cast copper alloy, screwed down, high pressure, with long shank and cup, crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed

S & F in repairs bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified & directed.

S/F in repair hand health faucet as specified and directed.

S & F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 15 mm bore complete all as specified and directed.

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 20mm bore complete all as specified and directed.

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed

S&F in repair CP Soap dish 100mmx50mm complete all as speicified and directed

S & F in repairs 125 mm brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size not less than 24"x31"x10", 0.63mm thick with adequate shelves all as specified and directed

S & F in repairs sinks with drainage board made of stainless steel 1.0 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S/F in repair fancy type cabinet mirror as specified and directed

S & F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed.

M & L 75 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair Grating doom 100 mm dia of PTMT (Min weight 25 gms) complete all as specified and directed

Dismantling of water tank of capacity exc. 250 and not exc. 500 litres and removing to store complete all as specified and directed.

Dismantling of water tank of capacity exc. 500 and not exc. 1000 litres and removing to store complete all as specified and directed.

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White and screwed lid

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid

S & F in repairs 20 mm ball brass stop valve, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store complete all as specified and directed

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends of any radius, complete all as specified

S & F in repairs 75mm bore PVC (SWR) bends of any radius, complete all as specified

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D2 as in sub base of floor complete all as specified and directed.

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match inculding 15mm thick screed bed in cm 1:4. complete all as specified and directed

M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 for receiving tiles complete all as specified and directed.

Demolition cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for providing PCC 1:2:4 type B1 using 20mm graded aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete with joints to match, except blocks or slabs complete all as specified and as directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling 150mm dia of cast iron or reinforced of cast iron or reinforced concrete drain pipes or SGSW pipes jointed in cement mortar and taking out of trenches floor and wall complete all as specified.

Excavating in trenches nexc 1.5 m width and nexc 1.5 m in depth for foundation etc nexc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material exc 250 m but n exc 500 m distance and depositing complete all as specified and directed.

Returning filling in including spreading levelling and watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for concrete bed in PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) to drain pipes including packing under,and haunching against the sides of pipes, after they are laid and tested for 100 mm dia (internal) PVC (SWR) pipes complete all as specified and directed (Pipes shall be measured & paid separately).

M & L in repairs100 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F door seal in wooden shutters including nails etc complete all as specified and as directed.

M&L cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc. 250 & not exc. 500 ltrs complete all as specified and directed

M&L cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc. 500 & not exc. 1000 ltrs complete all as specified and directed

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of bore of dia of pipe 15 mm (min wt 142 gm) complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of bore of dia of pipe 20 mm (min wt 210 gm) complete all as specified and directed.

S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.

S&F aluminum (die cast) body door closer hydraulically regulated, designation No 1 universal type, suitable for door shutters upto 700mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including making good of existing jambs complete all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum window and ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No) hinges type B 21 100mm long (02 Nos) suitable handle (1 No) etc complete all as specified and directed

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP Brass/SS screws @200 mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-Charge

Deduct Schedule of Credit of Rs. (-) 72710.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

Note : 1. For items of works ( 1 to 5, 55 to 97,, 107 to 116 contractor /authorised reps will daily collect the complaints from Sub Div duly signed by JE of complaints lodged in Armaan, E-Sewa/Maint Mela and offline on all working days of contract and will complete within 48 hrs otherwise recovery @ Rs 300/- per day per complaint will be charged. 2. For items of works (6 to 54, 98 to 106, 117 to 120) contractor /authorised reps will daily collect the complaints from Sub Div duly signed by JE of complaints lodged in Armaan, E-Sewa/Maint Mela and offline on all working days of contract and will complete within 10 days otherwise recovery @ Rs 500/- per day per complaint will be charged. 3. The period of Contract shall be 10 Months for the Date of Acceptance/First Work Order/Handing over of site.

MandeepConstructionCo

NARESH KUMAR KHAJURIA

DAVINDER SINGH

ALLIED AGENCIES

M/S SHUBAM ENGINEERS