SPECIAL REPAIRS TO ROOF OF BUILDING NO P-08, P-18, P-24, P-33, P-58 OF OTM ACCN OF CERTAIN UNIT UNDER GE KAMPTEE AND SPECIAL REPAIRS TO BLDG NO T-321 AT NCC OTA KAMPTEE.

Amount

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 using ( 12.5 mm graded stone aggregate) as in padding , copping proper slope and gradient, complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:4) on concrete surfaces using with water proofing liquid @ 200 ml/50 kg of cement complete all as specified and directed. Note:- Water proofing liquid will be measured & paid separately

Supply only liquid integral water proofing admixture of make pidilite or its equivalent.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sqm over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including aluminium paint total 200 gram/sqm in two layers over membrane complete all as specified and directed. Note:- WPT shall be done by authorised applicator

Disconnecting existing tanks, capacity in litres Exc 500 ltr and not exc 1000 ltr setting aside (or lowering if required) forrepairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing tanks, capacity in litres Exc 1000ltr and not exc 2000 ltr setting aside (or lowering if required) forrepairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) Tripple layer antibactrial (ISI Marked) 1000 ltr hoisted and fixed in position incl top cover incl dismantling of water tank all as specified in SSR part-I complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) Tripple layer antibactrial (ISI Marked) 2000 ltr hoisted and fixed in position incl top cover incl dismantling of water tank all as specified in SSR part-I complete all as specified and directed

S&F 20 mm bore ball valves. high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete all as specified and directed

All as per item No 10 but 25mm bore complete all as specified

S&F in repairs 20 mm bore ball valves. high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete.

All as per item No 12 but 25mm bore complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 25 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Refixing 20 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed

Refixing 25 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floor complete all as specified

S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floor complete all as specified

S&F GI tubing 25 mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floor complete all as specified

S&F in repairs Gun-metal, 20mm size globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repirs Gun-metal, 25mm size globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering.complete all as specified and as directed

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A.complete all as specified and directed.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping brass screw complete all as per manufacturer instructions.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of any colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping brass screw complete all as per manufacturer instructions.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M & L for joint free coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM (1:4) finished even and fair complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets complete, all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 28mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed (Note : GI frame work will be measured and paid for separately)

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 36 here-in-above but half brick wall in CM 1:4. complete, all as specified and directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specifed and directed.

M & L for prepartion of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed

Material & Labour for complete removal of existing treatment of old decorated wall surfaces and applying two coat of cement base paint over a coat of cement primer complete, all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed

M&L for MS Framed work of Fe-290(Gde E-165)as in doors or gates of angle or other section with gusset plates, rails, braces, MS Plates etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc complete all as specified and directed.

S&F 1.00 mm th Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Demolition of un-reinforced cement concrete in any description and in any position and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m as directed by the Engineer in Charge.

M&L for PCC type D2 (1:4:8) (40 mm graded aggreate) in foundation, filling and mass concrete/sub base complete all as specified and directed

M&L PCC (1:2:4) type B-1 (20mm graded stone agg) 100 mm thick in flooring finished cement concrete surface even and smooth using extra cement complete all as specifed and directed.

Material & labour 75 mm th PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber on top complete all as specified and directed. Note :- Sand cushion will be measured and paid separately.

M&L snad filling under cushion of paver blocks complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 (using 20mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete, all as specified and directed.

M&L for pre-polished Machine cut Kota stone slab flooring 20-25 mm thick fixed over cement screed base 20mm thick in CM (1:4) laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing complete, all as specified and directed.

M&L for pre-polished Machine cut Kota stone slab 18-25 mm thick in riser of steps, skirting, dado and pillar fixed over 10 mm thck back plaster in CM (1:4) laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab complete, all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 61 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 61 above but one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.

All as per item No 61 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 61 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

All as per item No 61 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 25A plug top socket point, complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x4.0Sqmm with earth wire of 1x4.0 Sqmm wire complete all as specified and directed. Note :- a. Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. b. 1x4 Sqmm wire + 2x4 Sqmm wire + 1 Run PVC conduit pipe shall be measured in one unit RM.

S&F for switch modular type single pole one way 6 amp 1module 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for switch modular type single pole one way 6/16 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F modular type with steel box plug top socket with single phase MCB 25A capacity complete all as specified and directed. Make Legrand/Havells/Indoasian

S&F ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

S&F ceiling fans, complete with three blade, down rod & clamps, nut bolts etc for fixing and accessories 230 v, 1200mm sweep, with squirrel cage induction motor connecting from ceiling rose with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

S&F in repair 18-22 Watt LED tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and l/p rated voltage 240 V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make & Model : Philips Astra Line CG LDC-20-CDL/ PHilips / Wipro / Surya

S&F in repair LED light fitting 10W bulk head luminaries with lamp holders etc complet with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed. Make:- Bajaj Cat Part No. LBHP 10 CDL of CG / Wipro/ Surya / Philips

S&F in repair building security light LED 25 W with Lumen O/P 1800 with driver with rated cvoltage 240 V, 50Hz, including mounting GI (made out of 25mm dia grade pipe 0.8 m bent two shape including FI clamps nout bolts etc complete all as specified and directed. Make : CG LSTS-25-CDL/Philips/Wipro

S&F in repair sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrant / Hegger/L&T

S&F in repair sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrant / Havells/L&T

S&F in repair MCB single pole & neutral 240 volt 'C' series 16 to 32 amps 10 KA, complete all as specified and directed. Make :- Legrant / Havells/L&T

S&F in repair MCB single pole & neutral 240 volt 'C' series 40 to 63 amps 10 KA, complete all as specified and directed. Make :- Legrant / Havells/L&T

S&F in repair MCB single pole & neutral 240 volt 'C' series 6 to 40 amps 10 KA, complete all as specified and directed. Make :- Legrant / Havells/L&T

S&F in repair motor stater single phase with box mounting on wall or surface direct EINC, 2 module, 240 volts, 25A, 50 Hz and making necessary connection complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 29,662.00]

M/s Rahul Traders

M/s T.S.JOHAR

VIJ ASSOCIATES

M/S Darshan Singh Plaha

M/s B S Jain

vidhamal&sons

M/s M.G. Hargunani

DEESHA CONSTRUCTIONS

Bidder Name

M/S Darshan Singh Plaha

DEESHA CONSTRUCTIONS

M/s B S Jain

M/s Rahul Traders

vidhamal&sons

VIJ ASSOCIATES

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

M/s T.S.JOHAR