REPAIR/MAINT OF DRAIN, FENCING, FOOTPATH AND BOUNDARY WALL IN AREA OF AGE B/R II UNDER GE WEST LUCKNOW

Amount

M&L for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:4 complete including demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M & L for Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete including demolition of cement concrete in ground floor and pavings not exc 15cm thickness above or below ground level complete all as specified directed.

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth using extra cement complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for Providing Precast Cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in cover slab (for manholes etc) set in CM 1:4 including demolition of cement concrete of any description not otherwise specifically provided for complete all as specified directed.

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete in ground floor and pavings not exc 15cm thickness above or below ground level complete all as specified directed.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete in ground floor and pavings not exc 15cm thickness above or below ground level complete all as specified directed.

M & L for 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring laid in alternate panel including finishing the surface even and smooth using extra cement complete including demolition of cement concrete in ground floor and pavings not exc 15cm thickness above or below ground level complete all as specified directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade confirming to IS-15658 (2006) with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specifed and directed. Make :-Mehtab Tiles /Tulip Infrastructure Saharanpur/ Any other equivalent ISI marked make as approved by GE

S & F Providing and laying at or near ground level kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and applying two coats of exterior emulsion paint over a coat of primer on all exposed surface of Kerb stone complete all as specified and directed.

Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even with preparation of new plastered surface of wall and applying two coats of cement based paint over a coat of cement based primer including taking down old cement plaster from walls complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type all as specified and directed.

M&L mild steel framed work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting and/or welding etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only galvanised chain link fencing, any size, type of shape complete all as specified and directed. Note :- Weight of chain link fencing shall be ascertained by BOO to be ordered by GE.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts, etc. including provn of galvanised mild steel binding wire of 0.9mm dia annealed complete all as specified and directed.

Supply only mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10mm dia of neck, length of bolts exc. 5cm but not exc 10cm long complete all as specified and directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed. NOTE: Each line wire to be measured.

Material and Labour 10mm dia mild steel TMT bar, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

S & F framed work such as grills, gratings etc for portions framed and hung as gates, including pintle hinges, stops, hand made slidning bolts, etc, with ends of bars shouldered and or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete including dismantling of mild steel work of any description all as specified and directed.

Material and Labour for preparation of new or previously untreated surface of steel surface of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M/S S&R Construction

RAJEEV AND ASSOCIATES

M/s J C Oberoi

M/s Sachkhand Traders

M/S Sunil Steel Works

Abode Artisan Enterprises

m/s durgesh traders & constractions

M/S Agnihotri Construction Co

PARAMOUNT ENGINEERS

M/S KAUSHIK CONSTRUCTION

SENGAR CONSTRUCTIONS