Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-AOC | L1 | Accepted-AOC Being lowest bid | |
| 2 | L2₹29.9 L+₹1.4 L (4.94%)Rejected-Finance NEW HOSPITAL ROAD UDHAMPUR UDHAMPUR UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance Being other than lowest bid | |
| 3 | L3₹30.0 L+₹1.5 L (5.43%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest bid | |
| 4 | L4₹30.5 L+₹2.1 L (7.24%)Rejected-Finance 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L4 | Rejected-Finance Being other than lowest bid | |
| 5 | L5₹34.8 L+₹6.4 L (22.5%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest bid |
| Sl No | Description | Qty | Unit | sohtra and co L1 | KUMAR CONSTRUCTION CO L4 | M/S GURU DEV BUILDERS L3 | RAMAN KUMAR L5 | MAHAJAN TRADING CO L2 | M/s Rukmani Construction Company L9 | JOGINDER SINGH L8 | pargal builders L6 | M/S R S Builders L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of wrought iron or mild steel work of any description, not otherwise provided for, complete all as specified and directed. | 5 | Qtl | 200 ₹1,000 | 100 ₹500 | 120 ₹600 | 50 ₹250 | 100 ₹500 | 500 ₹2,500 | 150 ₹750 | 40 ₹200 Lowest | 200 ₹1,000 |
| 2.00 | Demolition of cement concrete (reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed. | 3.1 | Cum | 400 ₹1,240 | 100 ₹310 | 70 ₹217 | 50 ₹155 | 100 ₹310 | 750 ₹2,325 | 100 ₹310 | 40 ₹124 Lowest | 200 ₹620 |
| 3.00 | Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. | 200 | Cum | 25 ₹5,000 Lowest | 100 ₹20,000 | 43 ₹8,600 | 50 ₹10,000 | 50 ₹10,000 | 300 ₹60,000 | 100 ₹20,000 | 40 ₹8,000 | 100 ₹20,000 |
| 4.00 | Demolition of cement concrete (un-reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed. | 128 | Cum | 25 ₹3,200 Lowest | 100 ₹12,800 | 45 ₹5,760 | 60 ₹7,680 | 50 ₹6,400 | 500 ₹64,000 | 100 ₹12,800 | 40 ₹5,120 | 100 ₹12,800 |
| 5.00 | Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. | 2,480 | Sqm | 2 ₹4,960 Lowest | 20 ₹49,600 | 3 ₹7,440 | 5 ₹12,400 | 2 ₹4,960 Lowest | 20 ₹49,600 | 10 ₹24,800 | 5 ₹12,400 | 7 ₹17,360 |
| 6.00 | M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed. | 20 | Sqm | 2,000 ₹40,000 | 700 ₹14,000 | 750 ₹15,000 | 750 ₹15,000 | 2,000 ₹40,000 | 1,200 ₹24,000 | 5,000 ₹1,00,000 | 600 ₹12,000 Lowest | 1,600 ₹32,000 |
| 7.00 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed. | 180 | Cum | 1,900 ₹3,42,000 Lowest | 3,800 ₹6,84,000 | 3,200 ₹5,76,000 | 3,700 ₹6,66,000 | 3,000 ₹5,40,000 | 4,700 ₹8,46,000 | 5,600 ₹10,08,000 | 4,090 ₹7,36,200 | 5,200 ₹9,36,000 |
| 8.00 | All as per serial item No. 7.00 here-in-above but except bricks with using existing bricks obtained from serial item No. 3.00 above including cleaning etc, complete all as specified and directed. | 35 | Cum | 1,800 ₹63,000 | 2,500 ₹87,500 | 1,200 ₹42,000 | 850 ₹29,750 Lowest | 1,300 ₹45,500 | 1,500 ₹52,500 | 4,000 ₹1,40,000 | 1,000 ₹35,000 | 2,100 ₹73,500 |
| 9.00 | M&L for 15mm thick rendering on fair faces or brick work or concrete surfaces in CM 1:4 with using water proofing compund and finished the surface even and smooth without using extra cement, complete all as specified and directed.
Note :- WPC shall be measured and paid separately under respective item of this BOQ. | 3,800 | Sqm | 180 ₹6,84,000 | 150 ₹5,70,000 | 140 ₹5,32,000 | 120 ₹4,56,000 Lowest | 140 ₹5,32,000 | 200 ₹7,60,000 | 180 ₹6,84,000 | 170 ₹6,46,000 | 190 ₹7,22,000 |
| 10.00 | Supply only integeral water proofing compound. | 90 | KG | 60 ₹5,400 | 70 ₹6,300 | 45 ₹4,050 | 40 ₹3,600 Lowest | 70 ₹6,300 | 50 ₹4,500 | 60 ₹5,400 | 50 ₹4,500 | 50 ₹4,500 |
Tender Value
₹49.9 L
EMD Value
₹99,820
Closing Date
30 May 2025, 6:00 pmClosed
GE (North) Udhampur
GE (North) Udhampur PIN-901220 C/O 56 APO
REPAIR / MAINT OF SECURITY WALL, GATES, DRAINS AND PATHWAY IN ASHOK VIHAR, FPD, WEU, DDGSI, SA OFFRS MESS, ASC BN AND REPAIR / MAINT OF BOUNDRY WALL, GATES, DRAINS AND PATHWAY IN 203 ENGR REGT, 222 ASC UNDER AGE B/R-II OF GE (NORTH) UDHAMPUR
2025_MES_707504_1
GE/U(N)-26/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (North) Udhampur
AS PER NIT
6 documents required · 6 mandatory
₹500
GE North Udhampur
₹99,820
Yes
28 Aug 2025
9 May 2025
7 Jun 2025
9 May 2025
30 May 2025
24 May 2025
Amount
Dismantling of wrought iron or mild steel work of any description, not otherwise provided for, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.
Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.
Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.
All as per serial item No. 7.00 here-in-above but except bricks with using existing bricks obtained from serial item No. 3.00 above including cleaning etc, complete all as specified and directed.
M&L for 15mm thick rendering on fair faces or brick work or concrete surfaces in CM 1:4 with using water proofing compund and finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.
Supply only integeral water proofing compound.
S&F 110mm bore PVC (SWR) pipe, single socket in any length with rubber ring joints, fixed in weep holes, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping, kneelers, bed block etc. including necessary fromwork as required, complete all as specified and directed.
M&L for preparation of new plaster surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant cement base primer, complete all as specified and directed.
M&L for walling of random rubble, uncoursed or brought upto coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed.
All as per serial item No. 14.00 here-in-above but except stones. Note :- Old stones obtained from serial item No. 3.00 here-in-above shall be used.
M&L for raised pointing to random rubble, uncoursed or brought upto course on stone masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed.
Providing precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bonders / bond stone, set in CM 1:6, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channels, drains etc, complete all as specified and directed.
M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.
M&L for RCC M-25 (Design Mix) as in beams, cantilevers, bressummers, lintels over 1.5 mtr clear span, complete all as specified and directed.
M&L for RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed.
Use and waste of form work to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
M&L for mild steel TMT bars 6-8mm dia, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
M&L for mild steel angle / flat iron work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work, conforming to Fe-410-0 Gde E-250 Quality 'A', complete all as specified and directed.
S&F in repairs/ replacement galvanised 2 strand steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed.
S&F in repairs/ replacement concertina coil, punched type (including spike and handle) with 50/51 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electrogalvanized to provide protection against outdoor exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips connect the individule turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9 Kg (+- 5%) without packing material and coil length 7 to 8 mtr when opened up. Each coil wound with bituminized hession cloth for providing protective coating, complete all as specified and directed.
Excavation in post holes (or similar holes), not exceeding 0.50 Cum each in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick each, watering and removing surplus soil, complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foudation for fencing post, filling in and mass concrete, complete all as specified and directed.
S&F mild steel bolts, purpose made with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long and dia of neck exceeding 12mm but not exc 20mm, complete all as specified and directed.
S&F in repair/ replacement chain link fencing galvanised mild steel wires 3mm dia, mesh size not less than 50mm x 50mm including provision of MS binding wire or fixing with nuts and bolts with angle iron posts etc, complete all as specified and directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in any type of soil, complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.
Removing excavated materials / soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.
M&L for 150mm bore reinforced concrete pipes, Class NP3, laid in trenches and jointed with collars including demolition and breaking of old existing pipes of any type and removing, complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and tested including necessary shuttering and supports, complete all as specified and directed. Notes :- (a) Thickness of bed belew/ under pipe -10cm. (b) Width of bed - outer dia of pipe plus 40cm.
Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slabs (for manholes etc), culvert on drain and similar articles with plain faces, set in cement mortar 1:6, complete all as specified and directed.
Cutting into exising manholes for connecting new drains (internal dia of pipe not exc 200mm) and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), smooth finished and reforming, benching, complete all as specified and directed.
M&L for preparation of new steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
M&L for preparation (incuding scapring of old treatment) of old steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, floor etc, complete all as specified and directed.
M&L for machine pressed cement concrete interlocking paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment, complete all as specified and directed.
M&L for factory made, glossy finished, coloured chequred cement concrete tiles, size of each tile 30cm x 30cm x 25mm thick, machine pressed, set and jointed in neat cement slurry and jointing with white/ grey cement & pigments o match with tiles, laid/ fixed over and including 20mm thick screed bed in CM 1:4 as in floors, complete all as specified and directed.
M&L for sand cushioning to filling in floors/ under paver blocks etc, complete all as specified and directed.
Providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) louvers & jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings and shuttering, complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi- corrugated etc.) sheets in roof coverings including ridges, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with galvanised 8mm dia 'J' hooks or self tapping screws, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with galvanised 8mm dia 'J' hooks or self tapping screws, complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets of any thickness including cover fillets etc, complete all as specified and directed.
S&F 4mm thick non asbestos fibre cement building boards, fixed or laid / inserted to timber / GI / aluminium grid framework with screws, complete all as specified and directed.
S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed.
MAHAJAN TRADING CO (BID ID -3308590)
M/S GURU DEV BUILDERS (BID ID -3309494)
KUMAR CONSTRUCTION CO (BID ID -3309482)
RAMAN KUMAR (BID ID -3309531)
pargal builders (BID ID -3309221)
M/S R S Builders (BID ID -3304950)
JOGINDER SINGH (BID ID -3306974)
M/s Rukmani Construction Company (BID ID -3307470)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .