Loading
Loading…
Loading…
Tender Value
₹17.9 L
EMD Value
₹35,800
Closing Date
24 Sept 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
12 conditions · 1 needing a document upload
Clause Regarding GST: (a) All the Bidders/tenderers should ensure that they are GST Compliant and their quoted tax Structure are as per GST LAW.(b) Tenderer Should Furnish their GSTIN numbers representing the States in Which they are registered GST, along with address of Registered Office.(c)The Contract is under GST Act and rules as applicable time to time.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
32 conditions · 6 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
AT DBRT-Barbari Colony:- Replacement of overaged split bamboo Qtrs with Type-III Qtr( 8 Units)(Qtrs No. E/31ABCD,E/54AB,M/13A,EL/46B).
LV-T-14-TSK-960~NFR
LV-T-14-TSK-960
Open
Works - General
12 Months
Tinsukia, Assam
₹0
₹35,800
24 Sept 2026
2 Sept 2026
10 Sept 2026
55 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 17,88,668 | ||
| — | 108.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of light point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A, ceiling rose, GI box with suitable modules for fixing switches. | — | — | — | 64,152 | |
| — | 40.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of Fan Point/Exhaust fan point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A, ceiling rose,Modular regulator 100W, Modular GI metal box with suitable modules for fixing switches & Regulators and 1.0 sq mm multistrand FRLS copper Cable in green for earth contuinity wire .( 4 Nos C/Fan & 1 No Exhaust Fan in each Qtr). | — | — | — | 27,400 | |
| — | 40.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 5 A plug point from main/sub-main board to the points by 1.5 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 6 A ,GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 20,520 | |
| — | 32.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 16 A plug point from main/sub-main board to the points by 4 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 16 A , GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 47,616 | |
| — | 8.00 | — | — | ||
| Supply, fitting, fixing , testing & commissioning of wiring materials for concealed type call bell points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with , GI box with suitable bell push switch 6 amps, bell & ceiling rose and suitable modules for fixing switches. | — | — | — | 7,360 | |
| — | 8.00 | — | — | ||
| Supply, fitting, fixing of Wiring materials for Geyser point wiring from DB/ sub main board to the points by 4 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 16 A , GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. . One 16 Amps DP MCB 'B' series in MCB enclosure to be provided near Geyser as controlling switch. | — | — | — | 20,880 | |
| — | 8.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring for AC point from main/sub-main board t o the points by 6 mm sq single core multi-strand FRLS copper cable through heavy duty PVC conduit pipe including MCB Protected Power Unit 25 A ,modular type having Socket, push Starter and 1.0 mm.sq. unsheathed copper cable in green colour for earth continuity wire. | — | — | — | 18,824 | |
| — | 8.00 | — | — | ||
| Supply, fitting, fixing, testing and commissioning of wall mounted type 12 way double door MCB DB made of steel sheet with 230V, 50 Hz, having IP 43 protection, Shrouded Neutral Bar & Bus Bar, Cement Spill Protector & Door Earthing with the following domestic switchgears for Type-III :- (i) 40 Amps SPN(2 Pole) RCBO Conforms to IEC 61009 breaking capacity 10kA, Sesitivity(In)=100mA = 1 No for incoming ii) 16 Amps. DP MCB 'C' series, 240/415 V, 50 Hz, 10 kA BC (In accordance with IS/IEC 60898-1) = 2 No. for 15 Amps. power circuit iii) 10 Amps. SP MCB "B" series (In accordance with IS/IEC 60898-1) 240V, 50Hz,10kA =3 Nos. for light, fan and 5 Amps. socket ,iv)16 Amps. SP MCB "C" series (In accordance with IS/IEC 60898-1) 240V, 50Hz,10kA =1 No for geyser Circuit v) 16 Amps. DP MCB "C" series (In accordance with IS/IEC 60898-1) 240V, 50Hz,10kA =1 No for AC vi) Single phase Electronic energy meter capacity 10-60 Amps maximum load current . 240 volt , 50 Hz poly carbonate body housed in a acrylic box with locking arrangent & all fixing arrangement. The outgoing cables from load of Meter to MCB DB should be 6 Sq. mm S/c copper cables and should be properly dressed using PVC flexible pipe 20 mm Dia. | — | — | — | 92,024 | |
| — | 4.00 | — | — | ||
| Supply, fitting, fixing of 4 way MCB DB Double Door having IP 43 protection, Shrouded Neutral Bar & Bus Bar, Cement Spill Protector & Door Earthing with 63 Amps DP MCB C seiries= 2 Nos | — | — | — | 14,984 | |
| — | 540.00 | — | — | ||
| Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLS copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 19,440 | |
| — | 450.00 | — | — | ||
| Supply, drawing and connection of single core 4 sq. mm PVC insulated & unsheathed multistrand FRLS copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 23,850 | |
| — | 250.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 25 mm.sq. 2 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For cable laying Excavation of earth depth 0.75 Mtrs. into breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. | — | — | — | 68,750 | |
| — | 180.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 35 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For cable laying Excavation of earth depth 0.75 Mtrs. into breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. | — | — | — | 78,300 | |
| — | 3.00 | — | — | ||
| Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm). The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables. | — | — | — | 29,700 | |
| — | 60.00 | — | — | ||
| Supply, fitting, fixing , erection of GI Pipe 40 mm dia(medium gauge) with necessary clamps and brackets. | — | — | — | 25,740 | |
| — | 72.00 | — | — | ||
| Supply, fitting , fixing of Batten Intergated type LED fitting 18/20W, 4 Ft, ultra slim co-extruded polycarbonate channel with integrated electronic driver should be as per IEC: 62384/IS:16104( SMPS based constant current output, THD<20%), IP20 protection, color temperature=6500K, rated input voltage=230V AC, 50 Hz, power factor=0.9, view angle>=120°, lumens output not less than 100 lm/Watt, operating voltage range: 140-270 V AC. LED Should be as per LM-80/IS:16105. Fixture Size:(LXWxH=1156x25x35 mm +/-1) . | — | — | — | 32,616 | |
| — | 4.00 | — | — | ||
| Supply, fitting, fixing of 20W LED Energy saving,environmrntal friendly, long life, Corrosion resistant ,impact proof, surface mounting IP65 luminarie with PC housing & opal finish cover suitable for Wet location, LED used as light source, as per direction of Engineer Incharge at site for staircase light. | — | — | — | 14,036 | |
| — | 16.00 | — | — | ||
| Supply & erection of earth by 80 mm dia 3 mtr. long (4.5 mm thickness) GI pipe ,8 SWG GI wire, GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with cement concrete plate having locking arrangement and watering pipe as per drg. No.CEE/STD/1. The 8 SWG GI wire should be properly terminated and connected to the MCB DB earth terminal .( 8 Nos for Qtrs and 4 Nos of cable Junction box). | — | — | — | 39,376 | |
| — | 30.00 | — | — | ||
| Supply, digging & erection of Tubular swaged GI pole, 8.5 Mtrs long SP-22 and construction of Foundation with cement concrete mixture of ratio 1:2:4 on total length grouted 2' below ground and 2' above Ground level. The pole swagging , welding and base plate welding should be as per IS : 2713 and Single Hot Dip Galvanising with an average coating thickness of 70 microns conforming to IS: 2629/IS: 2633/IS: 4759.( For incoming OH line to Qtrs.) | — | — | — | 7,63,110 | |
| — | 30.00 | — | — | ||
| Supply, Fitting, fixing of GI Angle 50x50x5 mm , 1000 mm long | — | — | — | 14,040 | |
| — | 30.00 | — | — | ||
| Supply, Fitting, fixing of GI Angle 50x50x5 mm , 1200 mm long | — | — | — | 16,830 | |
| — | 20.00 | — | — | ||
| Supply, Fitting, fixing of GI Angle 50x50x5 mm , 1500 mm long | — | — | — | 14,020 | |
| — | 240.00 | — | — | ||
| Supply, Fitting, fixing of LT Pin Insulator 100x65 mm with all accessories. | — | — | — | 25,440 | |
| — | 120.00 | — | — | ||
| Supply, fitting, fixing of LT Schakle Insulator 100x110 mm with all accessories. | — | — | — | 23,160 | |
| — | 6000.00 | — | — | ||
| Supply, Binding of ACSR Conduxtor 6/1/2.59(Weasel) Conductor on OH pole Structure with laying conductor on ground, lifting on poles, tensioning with tension clamps, binding on insulator on pole structure including supply & fittings of tension clamps, nuts & bolts with standard sagging in each and every span. | — | — | — | 2,40,000 | |
| — | 300.00 | — | — | ||
| Supply, drawing, straining & binding of GI guard wire on pole structure by GI bearer wire of 8 SWG & 10 SWG cross wire(1 route length consist of 2 mtrs. 8 SWG & 1 mtr.10 SWG GI wire). | — | — | — | 6,300 | |
| — | 8.00 | — | — | ||
| "Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required." | — | — | — | 40,200 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentTSK960.pdf
ATTACHMENT
GCCAPRIL2022WITHALLACS.pdf GCC 2022 with ACS
ATTACHMENT
AnnexuresSectionVII.pdf
ATTACHMENT
GCCAPRIL2022WITHALLACS.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .