Proposed estimate of the Interior work for Development of Nagar Panchayat SabhaGruha Babulgaon At Babulgaon Dist Yavatmal

Amount

Sub Heading 1

3D Wall Sculpture Providing and fixing 3D Wall Sculpture dado panel with single pattern on existing 8 to 12mm th. Plywood framework comprising OR on existing plain wall of adhesive fixing and fastening is done to obtain a flush and seamless finish etc complete as per drawing.Profile Edges moulding & binding etc complete. Spec. No. : As directed by Engineer-in-charge

Italian Mosiac Tiles Providing and laying Italian Glass Mosaic Tiles in gradation pattern as directed by Engineer in charge in required position with readymade glass mosaic adhesive and grout on 12mm thick cement plaster of C.M. 1:4 and neat cement float including filling joints, curing and cleaning etc. complete. (including all specials required like round edge tiles, comer cups etc) filling joints with neat white cement slurry curing and cleaning complete. Spec.No.: As directed by Engineer-in- charge

Glass Brick Partition Providing and fixing Glass Bricks Partition 80mm thick and brick size 190mm x 190mm fixing with silicon as per dressing and drawing etc complete Spec.No.: As directed by Engineer-in-charge

12MM THICK ACOUSTIC BOARDS : ( FOR CEILING ) Providing and fixing false ceiling of 12mm thick acoustic boards of approved make, with shapes and sizes as per drawings including scaffolding, frame work 35 x 35 mm at 60 cm centre to centre, all screws and fastenings and finishing complete. (Excluding runner to be paid separately).

GYPSUM FALSE CEILING : Providing and fixing Gypsum false ceiling of Gypsum Board 12mm thick as per drawings including G.I. wall angle of 20mm x 20mm size, G.I. grid runners of size 20mm x 38mm at 600mm center to center both ways and suspended usingG.I. 3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc.complete.

PLYWOOD PANNELING : Providing & fixing 12 mm th.panelling in Commercial ply-wood fixed on 25 x 75 mm sandwich plywood on plaster wall upto sill level, 100 mm skirting of size 12mm th. fixed over 12mm th panelling , finish joints with jointing compound as per drawing including good quality approved hardware etc. complete. Profile Edges Moulding & Binding etc. Complete Spec.No. : As directed by Engineer- in-charge.

VINEER ON PLY-WOOD PARTITION/ PANELING Providing & fixing / Pesting 3 to 4mm th. VENEER on ply- wood work finish joints with jointing compound as per drawing including good quality approved hardware etc. complete.Spec.No.: As directed by Engineer- in-charge Laminites & Mica, Profile Edges Moulding & Binding etc. Complete.Spec.No. : As directed by Engineer- in- charge.

Melamine Polish Providing and applying Melamine Polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Spec.No. : As directed by Engineer- in- charge.

PU/MRF Polish Providing and applying Two coats of P.U/ M.R.F Polish of approved colour and shade including scaffolding, preparing the surface by rubbing sand paper etc. complete. Spec.No. : As directed by Engineer- in-charge.

Vertical Venetian Blinds: Providing and fixing vertical venetian blinds of size 100 mm th. Fixed on aluminium channel fabric of vertical venetian blinds of good quality and colour, texture, material approved from Architect as per design including fixtures and fastening etc complete. Spec.No.: As directed by Engineer- in-charge.

PVC CARPET FLOORING Providing and fixing P.V.C. Vinyl Planks 1.5 to 2 mm Thick for Flooring with ready made adhesive including cleaning surface before laying, desing , pattern, colour etc. approved from architect, as per drawing etc. complete. Spec.No. : As directed by Engineer- in-charge.

ACRALIC CARPET : Providing and fixing Acralic carpet with ready made adhesive including cleaning surface before laying, desing , pattern, colour etc. approved from architect, as per drawing etc. complete.(800+gsm)

ANTITERMITE TREATMENT Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects etc..Spec.No.: As directed by Engineer- in-charge.

MEDIUM BACK CHAIR Medium Back Cantilever visitor Chair, Mesh Back one frame made of one piece injection moulded frame , Black Net Seat Tapestry, Premium Co2 welded twin Oval section Chrome Base, Fixed PP Armrest, moulded foam

Computer Table (1200x600x750mm) Computer Table @ 1200Lx600Dx750H Providing and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Plywood. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel and gable end : Made from 18mm plywood.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.1mm laminate On both side in all pannel.Pedestal with 1 Drawer and 1 Shutter. Lock on upper drawer, Pedestal made of 18 mm plywood, back panel made of 9 mm thick ply.Size - 404W x 450 x 675HmmSpecs No. As directed by Engineer-in-charge.

DISPLAY SCREEN WITH PROJECTOR Providing and Fixing Automatic stage display screen 96 x 72 inches for display presentation with XGA DLP Projector, High Brightness 3600 ANSI Lumens, 20000:1 High Contrast Ratio, Dual HDMI, VGA, Keystone Correction, Up to 15000 Hrs. Extra Long Lamp Life, Anti- Dust Sensor, 3D Capable. Including all accessories and hardware etc. complete Specs No. As directed by Engineer-in-charge.

ACRYLIC EMULSION PAINT Providing and applying washable Acrylic emulsion paint of approved colour and shade to existing surface in two coat includind scaffolding preparing the surface to receive paint and applying putty etc. complete.

8-10 mm th. Glass Door ( Pivot ) with Plywood and Veneer frame : Providing and fixing 8-10mm th .Toughen glass Single shutter door with pivot i.e floor spring fixed on floor glass is a fixed on commercial plywood bottom rail and top rail of size 40x150x100 mm with proper groove and beading and side rail 125mm including veneer as per drawing glass handle of size 300mm long fixed on glass with proper adhersive including grinding the edges , fixtures and fasteing and acid work / etching work : As directed by Engineer - in - charge etc.complete

CUTTING & DESIGNING ON PLYWOOD / NEW WOOD (CNC WProviding & cutting and designing on 18mm th Plywood / New Wood on wall cladding .As per design & drawing specified by engineer including fixtures and fastening etc complete Laminates & Mica , Profile edges Moulding & Binding etc complete . Spec .no : As directed by Engineer - in - chargeork):

PLYWOOD PARTITION : Providing and fixing PLYWOOD 18mm thick material studs double layer partition 75.00 mm thick using of 18 mm thick on each side of 34 / 76/ 36mm studs fixed to floor and ceiling chanel 70/32 at every 610 mm regular interval horizontally , 4mm groove, Aluminium pipe 25/35 x 50mm filling with wooden batten, including finishing the joints with jointing compounds , paper tape etc .complete, Profile Edges Moulding & BINDING etc . Complete .Spec .no : As directed by Engineer - in - charge

SOFA : Providing and fixing in 18mm th ply and solid wood for SOFA of size 60 x60 cm with high back of size 90 cm as per specified drawing over which fixing in position 75 mm thick including high quality of upholstry with approved colour shade and texture included sewing , cutting , nailing fixture and fastening etc . complete. Spec .no : As directed by Engineer - in - charge

EXECUTIVE TABLE (2.40x0.90x0.75m) CHIEF OFFICER / PRESIDENT'S TABLE Providing and fixing / side instalation of the C.O. / PRESIDENT'S TABLE having dimensions 2.4 mt. X 0.90 mt. X 0.75 mt. Made of 18 mm th. Ply, drawer on inner side and 50 mm thick facia. T. W. Beading is provided and for design half round beading is provided covering Plain glass on 36 mm thick top with side polish provided all over the table including good quality of approved fixtures and fastening, wall cature etc. complete as per drawing. Laminites/ veneer, Profile Edges Moulding & Binding etc. Complete. Spec.No.: As directed by Engineer- in-charge.

STORAGE : Providing & fixing/site Installation of the cup board / wall unit/ storage cabinet of required size & 40 cm width made out of 18 mm thick commercial plywood with shutters & selves & back wall of 12 mm thick plywood, shutters & sides finally finished with white cedar / veneer as per design including good quality approved Hardware such as special locks, handles hinges, wall catcher etc. and applying 3 coats of malamine polish of approved shade to white cedar ply and decorative beadings as or painting directed by the Engg.-in-charge.Laminites & Mica, Profile Edges Moulding & Binding etc. Complete. Spec. No.: As directed by Engineer- in-charge.

DIAS TABLE : Providing and fixing/side instalation of the DIAS TABLE having dimensions 2.40 mt. X 0.75 mt. X 0.750 mt. And Side Table (1.20 mt. X 0.600 mt. X 1.20 mt.) x 2nos. madeup of 18 mm th. Ply, drawer on inner side and 50 mm thick facia. T. W. Beading is provided and for design half round beading is provided covering Plain glass on 36 mm thick top with side polish provided all over the table including good quality of approved fixtures and fastening, wall cature etc. complete as per drawing. Laminites & Mica, Profile Edges Moulding & Binding etc. Complete. Spec.No.: As directed by Engineer- in-charge.

TABLE FOR MEETING ROOM : Providing & fixing / side installation of the Office Table of size 1.8 x 0.6 x 0.75 mt. below counter storage required size 0.45 width made out of 18 mm th.Commercial plywood with shutter, drawer and selves & back wall of counter 18 mm th. Plywood. shutter drawer, table top counter and front side of counter is laminated 1 mm th. including good qyality of hard ware such as lock, handles, hinges, ball cature channels , beading required as per drawng etc. complete. Laminites & Mica, Profile Edges Moulding & Binding etc. Complete. Spec.No.: As directed by Engineer- in-charge.

C.C T.V : Providing and fixing of CCTV including 4-8 channel DVR, 8 dome camera, bullet camera, hard disk, cables and wiring, LED 32”, POE switch etc. complete. Specs no. as directed by engineer-in-charge.

DECORATIVE PEDISTAL LIGHTES & SHANDILYEARS : Providing & fixing of DECORATIVE PEDISTAL LIGHTES & SHANDILYEARS (Small ) Hight 0.90 mt. & Diameter 0.45 mt. including all cables & wiring, etc. Complete.

BIG EXECUTIVE CHAIRS : Providing BIG EXECUTIVE CHAIRS with high Back & heavy handrest, hydraulic adjestment mechanism for both up and down, also rotating in all direction Upholastry made out of leatherette tapistry, etc. complete.

ARTIFICIAL DECORATIVE PLANTS : Providing & fixing ARTIFICIAL DECORATIVE PLANTS made out of PVC with natural colour of plants, Hight of the plant is 0.90 mt. & diameter 0.50 mt. Planted in PVC Decorative pots with decorative lighing on the top including all fixtures & fastening etc. complete.

DECORATIVE CENTER TABLE : Providing & Supplying DECORATIVE CENTER TABLE made out of 18 mm th. Ply and flexy ply laminated with Myca on both side, Tabel Top made out of 8 mm th. Glass resting on "D' Brackets or " corner" brackets of size 1.00 mt. X 1.00 mt. including all fixtures & fastening etc. complete.

12 MM THICK ACOUSTIC BOARDS : ( FOR WALL PANELLING ) Providing and fixing Wall Panelling of 12mm thick acoustic boards, with shapes and sizes as per drawings including scaffolding, frame work of country teak wood battens of size 70 x 45 mm and 35 x 35 mm at 60 cm centre to centre, all screws & fastenings and finishing complete. (Excluding runner to be paid separately).

PODIUM Providing and casting in situ Podium as per the detailed drawing made out of 18 mm ply including 1 mm Laminate on exposed faces of ply and applying melamine polishing to wood beding including all fixtures as specified by Engineer incharge, fixing bedding as per drawing etc complete (As Directed by Engineer Incharge)

STAINLESS STEEL LETTERS PROVIDING & FIXING STAINLESS STEEL LETTERS & LOGOS of size Hight 0.60 mt. & Width 0.45 mt. including all fixtures & fastening etc. complete.

ACIDE / FLIME WORK : Providing & applying Acide / Flime Work on Glass surface as per design & drawing directed by engineer /architect etc. Complete.

DECOLITE ( INLIGHT PANEL) : Providing & fixing / Laminating / Pesting DECOLITE ( INLIGHT PANEL ) on ply-wood work with addesive & nails including finishing on joints with jointing compound as per drawing including good quality approved hardware etc. complete.

FIRE FIGHTING (CO2 Type) Providing & fixing Co2 Type Fire Extinguishers of 4.5 Kg. Capacity Complete with Value, Disch charge harn carring neck Handel bracket as per I.S. 2878 with I.S.I. Mark.

FIRE FIGHTING (5kg Capacity) Providing & fixing A.B.C. Type Fire Extingusters of 5 kg. Capacity with preffere guage as per I.S. 13848 with I.S.I. Mark.

SOUND SYSTEM : Providing and supplying Sound System, wall speakers, Amplifiers, wall mount stand, cord mike, all cables and wiring, microphone etc. complete. Specs no. as directed by engineer-in-charge.

AIR CONDITIONER : Supplying, installing, testing & commissioning variable technology with Non-convertible mode for compressor, room air conditioning unit 1.5TR capacity & Non Split (Voltas/Blue Star/Lloyd/LG/Hitachi etc) having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

GLASS-WOOL FOR THERMOL INSULATION: Providing & fixing 50 mm thickness Glass- wool for Sound Proof, Thermal Insulation for ceiling & Hang on G.I. Roofing Sheet, tie-up with G. I. Mesh of 18 Guage Wire & 14 Guage Wire brace at 1.00 mt. C/C. Etc. Complete As directed by Engineer-in-charge.

Microphone: Providing and applying Gooseneck microphone having Freq. Resp. 50-16000 Hz, Sensitivity: 4mV/Pa, Impedance: 1000 ohm, Overall Length: 460mm (18"), Power Source: 1.5V-9V DC, including all accessories etc. complete. Spec.No.: As directed by Engineer-in-charge

M.S. Steel Pipe Base work Providing, fabricating and erecting steel structure work in hollow section of various thickness and sizes square, rectangular and round shape from 25mm to 450mm section as per IS 4923 YST 310 grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections and painting complete. Spec. No.: As directed by Engineer-in-charge

PLYWOOD PANNELING ( ON FLOOR) Providing & fixing 18 mm th.panellind in BWR ply-wood fixed on 25 x 25 mm sandwich plywood on floor over which half round beading placed 45 x 45 cm cross of size 18 mm th. 100 size 18mm th. fixed over 18mm th panelling, finish joints with jointing compound as per drawing including good quality approved hardware etc. complete. Profile Edges Moulding & Binding etc. Complete Spec.No. : As directed by Engineer- incharge.

H.P.L. SHEET : Providing & fixing 6 mm thick H.P.L. SHEET ( HIGH PRESSURE LAMINATE ) for Exterior cladding fixing on Aluminium Square Pipe of size 50 x 50 mm & 1.2 mm thick guage placed at 500 mm center to center both- way. The building structural solidity and toughness with MAPL HPL Sheets. Leading manufacturers of high pressure laminate sheet & ACP sheet in India, Including all fixtures, fastening And Scaffolding etc. complete as directed by Architect / Engineer.

PRINTER: Providing & Supplying Printers of good print speed and print resolution and easy for replacing fine cartidge, easy paper loading, alpha numeric character sets, up to 18 ppm speed, black and white color output, Laser printer, print, scan and copy function, 1 hi speed 2.0 port, As directed by engineer-in-charge.

PC Computer PC of Lenovo/Dell/Asus/HP or equivalent brand, intel i3/AMD ryzen 3 /equivalent, 4GB DDR, 1 TB harddisk, 18.5"LED HD monitor, integrated graphics card, 3.6 processor base frequency(GHz), 15.1 cabinet volume (Liter) 1 ethernet port, 2 USB port, 1 nos, VGA and HDMI ports, 1600x900 monitor resolution (pixel) 90-94 % minimum power efficiency range, Wired mouse connectivity, Wired keyboard connectivity As directed by Engineer-in-charge

AlluminiumComposite PANEL (A.C.P.) : Providing and fixing AlluminiumComposite PANEL Panel made out of thermoplastic cover of low density polyethylene (LDPE ), sandwitched between two Aluminium Sheets of Alloy Grade - 3000 series, each not less than Aluminium Composite Panels not less than 4.00mm, the exposed surface thereof shall have stove lecquered finishing coat not less than ( 26 +-2) micron (containing min 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface 0.50mm thick, total thickness of (facing the building exterior surface) shall have polyster based powder coating not less than 30 micron with protective peel-off foil on the exterior face (peel off foil will in no case leave any adhesive mark over the Composite Panel Surface after it is peeled off ). etc. complete. Spec. No.:As directed by Engineer-in-charge

Display Board : Providing & fixing display Board on plaster wall with 25 mm x 25 mm T. W. Batten over which soft board fixed with help of neiling and adhesive over which approved texture and quality fabric placed and fabric tightened with 18 mm th. decorative beading surrounding to desplay board as specified including good quality approved hardware & approved colour fabric etc. complete. Laminites & Mica, Profile Edges Moulding & Binding etc. Complete Spec. No. As directed by Engineer-in-charge.by engineer & architect as per drawing

space 2 interior

A Globia Creations