Re-carpeting of existing Bituminous road in of Premises of CEWS, Gevra.

Amount

Item Description/ Heading

Providing and laying bituminous macadam with minimum 40-60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses-501.6 and 501.7 to achieve the desired compaction 4 graded stone aggregate 20 mm nominal size).With mechanical paver finisher for Grading II (19 mm nominal size, bitumen content 3.40%)

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503 of section 500 Normal bituminous surface @ 0.25 kg / Sqm

Close-Graded premix Surfacing (Mechanical means using HMP of appropriate capacity not less than 60 tonnes/hour. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing wheeled rolled 8-10 tonne capacity, and finishing to required level and grade. A (with 60/70 grade bitumen Type B (13.2 mm to 0.09 mm size aggregates )

ROAD MARKING WITH HOT APPLIED THERMOPLASTIC COMPOUND WITH REFLECTORISING GLASSBEADS ON BITUMINOUS SURFACING Providing and Laying of hot applied thermoplastic compound 2.50mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.

Total impact of GST for the purpose of CTC