Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC 48 CHANDAK LAYOUT GHAT ROAD NAGPUR | NAGPUR | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹30.5 L+₹1.8 L (6.28%)Rejected-AOC | L2 | Rejected-AOC Not lowest bidder | |
| 3 | L3₹32.5 L+₹3.8 L (13.2%)Rejected-AOC | L3 | Rejected-AOC Not lowest bidder | |
| 4 | L4₹32.6 L+₹3.9 L (13.6%)Rejected-AOC | L4 | Rejected-AOC Not lowest bidder |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
31 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
ADDN ADLN TO EXISTING COOK HOUSE BLDG No.3A AT FORT AREA NAGPUR UNDER GE KAMPTEE
2024_MES_635613_1
84808/E8
Open Tender
Civil Works
Item Rate
180 days
GE KAMPTEE
As per tender document
7 documents required · 7 mandatory
₹500
GE KAMPTEE
₹71,000
Yes
12 Mar 2024
3 Jan 2024
1 Feb 2024
3 Jan 2024
31 Jan 2024
17 Jan 2024
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Dismantling timber scantlings in framed work 40 sq. cm and over in section, in any position complete all as specified and directed.
Supply and fix Mild steel sheet eaves gutters 1.25mm thick 150mm dia, galvanised class 3, half round with rounded edges complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
Taking down window or door frame with shutter of any description (without taking of shutter from the frame) area not exceeding 1.5 sqm complete all as specified and directed.
All as per item above but area exceeding 1.5 sqm but not exceeding 4.00 sqm
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of PVC pipes (110/75 mm bore) jointed in cement mortar and taking out of trenches /from walls including fittings such as bends, branch pieces, traps etc complete all as specified and directed.
Material and labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to IS 1161-1979 grade Fe 410 (Gde E-250) complete all as specified and directed.
Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.
Material and labour Rendering 15 mm thick in two layers, first coat 10 mm thick plaster in cement mortar 1:6 and second coat of 5 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured & paid separately).
Supply only Liquid water proofing compound of approved quality complete all as specified and directed.
Material and labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished fair and even with out using extra cement complete all as specified and directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 10 cm but not exceeding 20 cm girthcomplete all as specified and directed.
Material and labour 15mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor including taking up or down existing GI tubing complete all as specified and directed.
All as per item No 22 above but 20mm bore complete all as specified and directed.
All as per item No 22 above but 25mm bore complete all as specified and directed.
Supply & Fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.
Supply & Fixing mild steel TMT bars 5 mm dia & over upto & including 10mm dia as stirrups, spacers and binders cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.
Material and labour for cement concrete 1:2:4 type B-0 using 20 mm graded aggregate as in lintelsup to 1.5m clear span cills , steps , seismic bands and other similar bands, parapets, coping, benching, bed plates, kerbs and thelike including weathering, slightly rounded, chamfered angles and throating incl waste formwork complete all as specified and directed.
Excavation in trenches not exc 1.5m in depth and not exc 1.5m in width for fundation etc or for shafts, wells, cesspits, manholes, pier holes etc. not exc and getting out in sqm on plan & getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Material and labour for providing plain cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in sub bases/pavings complete all as specified and directed.
Material and labour Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) using 20mm graded aggregates as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.
Material and labour Form work to side of columns and similar work for fair finished complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) using 20 mm graded aggregates as in columns and pillars etc complete all as specified and directed.
Material and labour Form work to side of sides and soffits of floor, lintel or roof beams including supports, overhangs etc also splays between floor and beam etc complete for fair finished complete all as specified and directed.
Material and labour for providing RCC M-25 (Design mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.
Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.
All as per item No 38 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.
Material and labour coloured for glazed ceramic tiles 300x450x6 to 7mm thick, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.
Material and labour for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed base laid in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
All as per item 41 above but in riser of steps, skirting, dado and pillars including rendering 10 mm thick in cement mortar 1:3 complete.
Supply and fix Stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fix 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Supply & Fixing in repairs bib taps fancy type chromium plated long body, with crunch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified and directed.
Material and labour for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
Supply and fix 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of any number of panel complete all as specified and directed.
Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.
Supply & fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
Material and labour for 18 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.
Material and labour for 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
Supply & Fixing 100mm long butt hinges extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and directed.
Supply & Fixing aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
Supply & Fixing 75 mm brass handle , cast type, polished bright handles for cabinet complete all as specified and directed.
Supply & Fixing for brass 2 levers locks, drawer, cabinet grade I size 50 mmcomplete all as specified and directed.
Material and labour for Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Material and labour for Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
Supply & Fixing 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
Supply and fix anodised aluminum powder coated three track sliding windows comprissing of one flyproof shutter and two glazzed shutter of frame size 92.0mm x 31.75mm x 1.30mm thick nad shutter frame of size 40mmx18mmx1.55mm thick with necessary jointing cleats , glazzing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangements and anodised aluminium grill made out of 7 mm wide flat square, rectangular or similar section, fixed with channel of size 38mmx12mmx13mm (section 8778) complete all as manufacturers catalogue 7 specifications complete all as specified and directed. Make of grill : Grill No. 20 of DECO GRILL or equivalent in specified makes. Notes: (i) Glass fittings in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium wire cloth in panels of wire guazed shutter shall be 0.45 mm nominal dia of wire and average width of aperture 1.40mm, fixed with aluminium wire staples. (iii) Glass fittings in panels of glazzed shutter shall be 5 mm thick tinted sheet glass of approved makes and shade/tint. Make of aluminium section : Jindal or equivalent in specified makes.
Supply and fix Gl frame work for seamless ceiling of size 600mmx600mm comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
Material and labour Non asbestos designer fibre cement building boards of size 595x595x6mm fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. Note : (i) GI frame work will be measured seperately. (ii) The grid system shall be as per specifications of make as specified and directed.
Material and labour for Machine cut cudappa stone slab 20-25mm thick over 20mm cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.
Material and labour for pre-polished granite 20 mm thick 9of any type) work (table rubbed and polished) in steps, jams, pillars; cooking platform and like over screed bed 20 mm thick 1:3 cement mortar including pointing in white cement with pigments to match with shade of granite including necessary notching, chamfering the edges complete complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Supply and fix PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed.
Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in cement concrete type B -1 1:2:4 complete all as specified and directed.
Supply and fixed 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
Supply and fixed 40 mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches complete all as specified and directed.
Supply & Fixing 250 mm Aluminium alloy, anodised, sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolt and fixed complete all as specified and directed.
Supply & Fixing 150 mm long Aluminium handle cast type, anodised complete all as specified and directed.
Supply & Fixing 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply & Fixing Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 1000 litres capacity and including dismantling existing water tank and removing from site complete all as specified and directed.
Material and labour for preparation of old plastered or unplastered surfaces of any description exceeding 10 cm width or girth and applying two coats of weather sheild paint (Apex) over a coat of primer complete all as specified and directed.
Material and labour for preparation of new plastered of any description exceeding 10 cm width or girth and applying two coats of weather sheild paint (Apex) over a coat of primer complete all as specified and directed.
Material and labour preaparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.
Material and labour for Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for prepartion of new plastered surface and applying two coats of oil bound distemper over a coat of Primer over two coats of putty complete all as specified and directed.
Material and labour for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of Primer over two coats of putty complete all as specified and directed.
Material and labour for steel work in tubular trusses including special shaped washer etc complete using ERW or including butt welded tubes confirming to IS 1161 : 1979 grade St 240 complete all as specified and directed.
Supply and fixed Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.
Material and labour 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including necessary constrution/expansion joints complete all as specified and directed.
Demolition of cement Concrete (unreinforced) of any description in ground floors not otherwise specifically provided for removal of rubbish /debris outside MD land and complete all as specified and directed.
Removal building material etc to a distance of exceeding 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.
INTERNAL ELECTRIFICATION
Taking down point wiring with aluminium conductor cable of light point fan and socket light and power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/floor etc to match with existing surfaces including white washing /colour washing/ distemper to match with existing wall /floor/ceiling finishes complete all as specified and directed..
Taking down sheet metal enclosure DB, TPN DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.
Taking down sub main wiring of any size/ capacity complete making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.
Material and labour in repair for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size including dummy switches wherever required complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly complete all as specified and directed.
All as per item No. 87 above but One ceiling /exhaust fan point controlled by one switch and regulator.
All as per item No. 87 above but One 3 pin 5 amp socket out point on the same board with other switches.
All as per item No. 87 above but One 3 pin 5 amp socket outlet point on the independent board with other switches.
All as per item No. 87 above but wiring 2.5 sqmm multistranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point.
Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm with IS 9537 (Part-III) 1983 marked medium grade concealed in wall of the size 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm, complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make. complete all as specified and directed.
All as per item No. 92 above but 2x6.0sqmm with earthwire of 1x6.0 sqmm
All as per item No. 92 above but 4x4.0sqmm with earthwire of 2x4.0 sqmm
All as per item No. 92 above but 4x6.0sqmm with earthwire of 2x6.0 sqmm
Supply and fixing ceiling rose, surface type, 2/3 terminals 5 amps, complete all as specified and directed.
Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.
Supply and fixing in repair for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: V guard/legrand/ Crabtree.
All as per item No. 98 above but 16 amp
Supply and fixing in repair for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed.
All as per item No. 100 above but 16 amp
Supply and fixing in repair for modular fan step regulator 120 watts 2 module complete all as specified and directed.
Supplying and fixing in repair highly durable surface mounted 18/20 Watt LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make :Bajaj/Wipro/Syska/Jaquar
Supplying and fixing rechargable LED emergency inverter bulb (cool white) 9 W, 240 V, lumen efficiency 100 lumen per watt complete all as specified and directed.
Supply & fix in repair light fitting 9W/10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed.
Supply & fix in repair building security light LED 25 W with lumen O/P 1800 with driver with rated voltage 240 V, 50 Hz, including mounting GI (made out of 25 mm dia light grade pipe 0.8m bent two shape including FI clamps nut bolts etc complete all as specified and directed.
Supply and fix in repair sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.
Supply and fix in repair sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.
Supply and fix in repair sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.
Supply and fix in repair MCB single pole 240 volt 6 to 32 amps 10 KA, breaking capacity, 'C' series complete all as specified and directed.
Supply and fix in repair MCB single pole & neutral SPN 240 volt 32 amps 10 KA, breaking capacity, 'C' series complete all as specified and directed.
Supply and fix in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripal pole and neutral TPN 40 To 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.
Material and labour earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighing not less than 1.87 kg per sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and aluminium lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. complete all as specified and directed.
Supply and fix in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripal pole and neutral TPN 40 To 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single phase 230 V of size 450 mm sweep with blades and frame and louvers complete all as specified and directed.
Supply and fix ceiling fan complete with blades, down rods, electronic regulator and accessories 230 V, 1200 mm sweep minimum air delivary 210 CFM with service value 6.00 BEE. Five star rarted with brushless direct current motor ( BLDC) complete all as specified and directed.
COOKING GAS PIPE LINE
Supply and fixing of LPG manifold 1" (comply with the distributing company's stipulations) to withstand gas pressure of 25 kg per square cm or confirming to IS 6044 (Part-I) 2000 with provision for 4 Nos of flexible pipe for 4 Nos of cylinders (without cylinders) with suitable pressure regulators complete all as specified and directed. Note: Joints in manifold headers should be welded or brazed using a material which shall have a melting point of at least 540°C all as per IS practice and relevant code. All joints between manifold headers and cylinder connectors shall be readily accessible.
Supply and fixing of flexible pipe of size 12.70 mm (1/2") with nut for LPG cylinders confirming to IS 6044 (Part-I) 2000 complete all as specified and directed.
Supply and fixing of self closing adaptor (1/2") 12.70 mm fixing in flexible pipe complete all as specified and directed.
Supply and fixing of non return valve of size (1/2") 12.70 mm complete all as specified and directed.
Supply and fixing of manifold valve made out of brass/Nickel (1/2") 12.70 outer diameter after the manifold in the main line complete all as specified and directed.
Supply and fixing and testing of copper pipe (minimum thickness 1 mm) line (3/8") 9.525 mm connected to manifold from one side and main pipe line on the other side complete all as specified and directed.
Supply and fixing Electric Resistance Welded (ERW) tube (1/2") 12.70 mm medium grade confirming to IS 1239 (Part 1) complete all as specified and directed. Make : Tata/Jindal or equivalent make as approved by GE Note: (i) Pipe shall be supported with proper saddles or clamps at intervals of not greater than 50 cm and rates demmed to be included for the same.
Supply and fixing of 15 psi controller in the main line for controlling the pressure complete all as specified and directed.
Supply and fixing of main line valve of size 12.70 mm in the main line for controlling the pressure complete all as specified and directed.
Supply and fixing of 5.5 controller regulator confirming to IS 6044 (Part-I) 2000 complete all as specified and directed.
Supply and fixing of ball valve of size (3/8") 9.525 mm for connection to individual stove connecting with flexible pipe complete all as specified and directed.
Supply and fixing of flexible pipe for burners of size 9.525 mm connecting from ball valve to individual stove complete all as specified and directed.
Supply and fixing of LPG gas detector system comprising of 1 x remotely located sensor and alarm with linear power supply to monitor gas leakage alongwith indication for normal/fault /alarm alongwith accept/reject button to cancle the alarm all as confirming to IS-2189 and IS 2148 complete all as specified and directed. Note : Rate to include alarm/hooter.
Supply and fixing of fire extingusher 10 kg each mounted on wall for easily removal in case of fire as approved portable B:C rating dry chemical fire extinguisher ISI approved complete all as specified and directed.
Note : The amount against Schedule of Credit on Page No. 46 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.
Devika Constructions
khushal constructions
CREATIVE CONSTRUCTION
Bidder Name
dhanshree enterprises
khushal constructions
Devika Constructions
CREATIVE CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .