Painting and Interior, Civil repair works at NDBP and BTF in NIOT Campus.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth ( using mechanical method) including necessary repairs to scratches etc,all complete as per instruction of Engineer in charge.

Providing and Applying of Dr. Fixit Dampguard is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. It is used as internal coating for the damp-proofing treatments of water tanks. It has excellent water resistance, adhesion, hardness & toughness and sets faster similar to solvent based epoxy formulations.Scrapping should be done upto existing plastering surface. Clean the dust by washing it with water,Fill the cracks & grooves with Dr. Fixit Dampguard and cement modified putty & allow it to dry for at least 24 hours.Apply the first brush coat of mixed quantity (1:1:1 - base :hardener : water) of Dr. Fixit Dampguard. Allow drying for 6 to 8 hrs. Apply second and third brush coat of mixed Dr. Fixit Dampguard. Allow it to cure completely for 24 hours etc,all complete as per instruction of Engineer in charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc,all complete as per instruction of Engineer in charge. Make:Asian,Birla white,JK.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content etc,all complete as per instruction of Engineer in charge. Note: Base coat of Royale luxury emulsion.Make:Asian,Berger.

Wall painting with Acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats etc,all complete as per instruction of Engineer in charge.Note:Royale Luxury emulsion or equivalent and Colour and shade will be approved by Engineer In-Charge.Make:Asian,Berger.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.Make:Asian,Berger. Location : NDBP Bay -1&2,BTF Bay area.

Painting with Synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work. Make:Asian,Berger.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including one coat of priming for exterior primer applied @ 2.20 kg/10 sqm).Make:Asian,Berger.Location : NDBP,BTF Building outer Border.

Polishing on wood work of French spirit polishing : Two or more coats on new works including a coat of wood filler etc all complete as per instruction of Engineer in charge.Before quoting the rate contractor should visit the site.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand).Location : NDBP Bay - 1,2