Under state Government special scheme of development of basic facilities - Renovation of Ram Ganesh Gadkari Rangayatna in Thane Municipal Corporation area.

Amount

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.S. Tubes, m.S. tube challis, m.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Chipping /removing loose concrete upto reinforcement bars, without damaging the reinforcement, removing all the loose materials and to make all the exposed surfaces free from oil, dust and all impurities etc complete.

Providing and fixing 6 mm thick commercial plywood with jungle wood frame work of 50 x 35 mm size at 60 cm on both ways for closing the window portion/openings for protection from falling debris, dust etc. including cutting, fixing with nails and removing after the same after completion of the work. (To be used after approval of Superintending Engineer)

Transportation of excavated earth including loading and unloading per truck trip of 5.00 cubic meter capacity per trip. (15Km)

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Demolishing R.C.C. slab, R.C.C. wall of any thickness, R.C.C.beams, joists, R.C.C. columns, piles, pile caps etc, in any thickness and size manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

Removing and refixing existing door or window with frames and shutters, making good the damaged brick work and applying 3 coats of Syn. Ena. Paint

Removing existing R.C.C. jallies of any design & deposit to ward store complete.

Providing precast cement concrete Jali of Nominal mix 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. For thickness of 100 mm.

Providing precast cement concrete Jali of Nominal mix 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. For thickness of 50 mm

Providing precast cement concrete Jali of Nominal mix 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. For thickness of 40 mm

Providing precast cement concrete Jali of Nominal mix 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. For thickness of 25 mm

Providing filling of micro-concrete and 10 mm aggreagate (1:1) including scarificial leakproof mS shuttering includes the cost of hire charges of all machineries, barge, boat, cost of all tools and all labour charges etc., complete

Providing protection of unexposed old reinforcement on non spalled concrete by insertion of sustained release corrosion inhibitor caplets like POWRTHROW sustained release Corrosion inhibiting caplets of to protect both anodic & cathodic sites and shall reduce to reduce corrosion potential Ecorr by minimum 80 mV in conductive medium, by drilling 20 mm holes into the concrete at a depth of 25 mm and inserts to be filles by EPCO-PC-Putty. Caplets shall inhibit corrosion inhibition efficiency of 98% (when added 0.03% by weight) against control sample evaluated by Tafel polarization method. Depth of penetration for effective corrosion protection shall be 120 mm and film formation of 20 microns as evaluated by CSIR-CECRI Karaikudi.

Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. and applying sulphate and chloride free inorganic single component rust remover Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface shall become blackish non rusted colour. After 24 hours of application of rust remover, loose particles shall be removed by brush. Apply one more coat of Rusticide. Apply bonding coat slurry of high performance acrylic polymer - methyl 2-methylpropenoate copolymer with another innovate as approved by Engineer in charge on entire surface. mix 1 Kg of acrylic polymer with 0.5 Kg of cement. Finish it with ready to use repair polymer modified mortar based on special cements, formaldehyde based polymer with thixotropy modifying agents as approved by Engineer in charge. The Polymer modified mortar should attain min. compressive strength of 20 N/mSqm in 1 day and 30 N/mSqm in 7 days) by adding 13 - 16% water by weight of polymer modified mortar for treatment to the damaged RCC members. Add 1 Kg of migrating Corrosion Inhibiting Admixture as approved by Engineer in charge per 25 Kg bag of polymer modified mortar. After mixing polymer modified mortar, it can be trowel applied or sprayed. When applying by hand, polymer modified mortar must be forced tightly into the substrate to ensure complete contact with the substrate. (If scaffolding is required, same shall be provided and will be paid under relevant item)(15- 30 mm thickness at a time).

Providing leak proof treatment by Injection grouting method to old floor without removing tiles of W.C., bath, with cement sand proportion of 1:1.5 and waterproofing compound at 2 Kilogram/bag of cement mixed in 35 liters of water including drilling holes in required position grouting with above mixed solution and ceiling etc. complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing in position HCRm / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Shear Connectors: make 10/12 mm dia holes using heavy duty electrically operated hammer drills in the concrete of RCC members to a depth of about 75 mm at 500 mm c/c or at suitable grid in zig-zag fashion, clean the holes using air jet and fix pre-fabricated 100 x 50 mm L-shape 8 mm dia rebar using Anti Corrosive protective coating so that 75 mm out of 100 mm is inserted inside the concrete and 25 mm remain outside along with 50 mm bend. The shear connectors are used to tie the additional reinforcement bars

Supplying, Drilling/ Cleaning hole and injecting chemical .Application to be designed separately for Rebars as Simply Supported, moment or Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines.The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drillbit sor hollow drill bits to the required depth by rotaryhammerdrill, cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA22 battery dispenser along with piston plug.The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedmen to frebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval.Scanning before drilling to be done to avoid hitting existing rebars. HY200 -16 mm dia 320mm depth

Supplying, Drilling/Cleaning hole and injecting Hilti make ETAA pproved RE 500 V 3 chemical. Application to be designed separately for Rebars as Simply Supported, momentor Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines. Thechemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA 22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer‘s recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS RebarSoftware&thereporttobesubmittedtotheproject manager / design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -10 mm dia 200mm depth

Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -12 mm dia 240mm depth

Supplying, Drilling/Cleaning hole and injecting Hilti make ETAA pproved RE 500 V 3 chemical. Application to be designed separately for Rebars as Simply Supported, momentor Splice Connection as per EC2/TR023 or relevant tested and accepted rebar guidelines. Thechemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air,filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA 22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer‘s recommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & there port to be submitted to the project manager / design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -8mm dia 160mm depth

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By manual means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By mechanical means

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and grouting the holes by Poly Ceramic Cementitious i.e NicGrout G 06 + 53 grade cement material of as per requirement to reduce the porosity of concrete / masonry structure and to increase the strength of structure using grouting pipes , grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, etc. Complete as per specification and as directed by Engineer-in-Charge.

Providing and laying Cast in situ/Ready mix cement concrete in Sqm0 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete, With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ /Ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready mix cement concrete m-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready mix cement concrete m-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready mix cement concrete m-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready mix cement concrete m-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready mix cement concrete m-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready mix cement concrete in m-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing chicken mesh of 22 gauge,with about 30cm. Width at the junction of R.C.C members and brickwork,of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Injecting approved low viscous epoxy grout into concrete slab, stone masonry cracks, columns etc. by suitable gun/ pump (using Araldite GY-257 & Aradur -21 in 1:0.21 prop.) at required pressures by providing necessary scaffolding, drilling and inserting 12mm dia.Brass grouting multiperforated nipples upto 30mm to 40mm depth, using m Seal,Quartz sand around the nipple, cutting of nipples after curing, cleaning etc. complete. (This item shall be paid on actual onsumption of epoxy used in Kgs.)

Strengthening structural elements by providing & fixing CARBON FIBER (make Sika or BASF or FOSROC) Surface preparation: Grinding concrete substrate, cleaning it with wire brush removing oil, laitance if present, rounding sharp edges to min 25 mm radius etc.complete. Profiling: providing & Applying compatible mbrace primer on prepared substrate, Filling the holes and uneven surface with high strength epoxy putty etc. complete IF Required. Wrapping: Providing & Applying first coat of Saturant, cutting the carbon fiber sheet to size, wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc. complete.Sand pasting: Providing & Applying second coat of Saturant after min. 12 hrs, rectify air voids if any paste the rive sand on it to make surface rough to take any further finishes (mode of measurement: Per sq.Rmt of mbrace CF 400 sheet applied and not surface area of Concrete application & Quantity will be measured including wastage) The rate includes all type of material, application, equipment & scaffolding etc complete. Rate is applicable for all height & level.

Jacketting the existing column of size as shown in the drawing by removing the concrete cover to reinforcement, by chipping or other suitable means to expose the reinforcement of existing column in order to make available the same for binding the extra reinforcement as shown in the drawing and also removal of rust, scales of the reinforcement in order to provide and apply approved make of epoxy resin to get proper bond with newly laid Sqm5 grade concrete. The aforesaid concrete shall be laid by the sides of the existing column with uniform thickness of 115 mm or as specified, for jacketing purposes thereby increasing the sectional dimensions by 150 mm or as specified (excluding finishing) at any height with requisite shuttering, centring, scaffolding, proping, repairing the existing surface as specified and also removal of debris, curing etc. complete as per design and drawing etc. directed. (NOTE :- Reinforcement will be paid separately under respective item of schedule ).

Jacketting the existing beam or beam connections as shown in the drawing by removing the concrete cover to reinforcement, by chipping or other suitable means to expose the reinforcement of existing beam or beam connections in order to make available the same for binding the extra reinforcement as shown in the drawing and also removal of rust, scales of the reinforcement in order to provide and apply approved make of epoxy resin to get proper bond with newly laid Sqm5 grade concrete. The aforesaid concrete shall be laid by the sides of the existing beam with uniform thickness of 75 mm or as specified, for jacketing purposes thereby increasing the sectional dimensions by 100 mm or as specified (excluding finishing) at any height with requisite shuttering, centring, scaffolding, proping, repairing the existing surface as specified and also removal of debris, curing etc. complete as per design and drawing etc. directed. (NOTE :- Reinforcement will be paid separately under respective item of schedule ).

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Providing antitermite treatment around the periphery of the existing building as per I.S. 6313 (Part-III) by excavating trenches of 20cm width and exposing the sides of columns and plinth beams upto a depth of 300mm and injecting one percent of chlorodane emulsion concentrate at the rate of 2.25 litres per One Running metre and refilling the trenches etc. complete covering 2 years guarantee on bond paper.

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Providing and fixing 6 mm thick commercial plywood with jungle wood frame work of 50 x 35 mm size at 60 cm on both ways for closing the window portion/openings for protection from falling debris, dust etc. including cutting, fixing with nails and removing after the same after completion of the work. (To be used after approval of Superintending Engineer)

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Providing and grouting the holes by Poly Ceramic Cementitious i.e NicGrout G 06 + 53 grade cement material of as per requirement to reduce the porosity of concrete / masonry structure and to increase the strength of structure using grouting pipes , grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, etc. Complete as per specification and as directed by Engineer-in-Charge.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Clean the existing surface / terrace thoroughly to remove dirt, loose particles, laitance etc. For emergency waterproofing of existing terrace. Use a vacuum cleaner or high pressure jet or wire brushing as per requirement. Examine the surface closely for any cracks. Fill it with acrylic polymeric non-shrink crack filler putty as approved by Engineer in charge a pure aliphatic, acrylic, polymer modified ready to use paste. After filling, allow the surface to dry for atleast 24 hrs. If the depth of the crack is more than 2-3 mm apply in layers at intervals. moisten the surface with a water jet one day prior to the application of waterproofing coating. mix 1 part of 2-methoxycarbonyl-1-propene-Butyl-2 propenoate (mPBP) membrane as approved by Engineer in charge and 1 part of grey cement by weight using a low speed mechanical stirrer to form slurry lump free consistency. Apply this as a primer coat of 2-methoxycarbonyl -1- propene- Butyl -2 propenoate (mPBP) membrane as approved by Engineer in charge. Apply the same slurry by roller at 24 hrs interval between the applications of Nos. coat. Extend the coating to parapet walls. Allow the primer coat to set for 24 hrs. After the primer coat is set, apply two coats of pure enoate based polymer titanium dioxide based 2-(methoxycarbonyl)-1-propene-butyl-2 propenoate (TmPBP) and 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (mPBP) of waterproof coating as approved by Engineer in charge. Ensure that no pinholes are let untouched. Allow the membrane to cure for 24-48 hours. Single Component, UV Resistant, Elastomeric, High Build Waterproof Coating (Confirming to DIN 1048) should have following minimum properties: 1) Elongation % (ASTm D 638): @ 400% 2) Tensile Strength (ASTm D 412): 150 psi 3) Water Permeability (DIN 1048): Zero 4) Solids: > 65% 5) pH: 8.5 - 10.5

Providing and applying a base coat comprising of 1Kg Polydee-mC and 1Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Providing and fixing colour coated Zincalume AZ150 ( min 150 gms/sq.Rmt total on Nos. side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base metal Thickness ( BRmt ) (0.5 mm TCT ), Hi-strength steel with min.550 mPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square metre)

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

Prefabricated grid mullions are fixed on to the RCC and concrete masonry walls with SS 316 anchor bolts as recommended by approved supplier to support given design loads. The brackets shall have provision movement to accommodate the construction tolerances with +- 25 mm plumb in case of RCC structure and +- 25 mm plumb incase of steel structure . Use of Hot Dipped galvanized brackets with serration and serrated washers to prevent wind direction movement after final postion. The design shall accommodate the building movements, thermal expansion and seismic movements. The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard from approved extruder. All the internal & externally visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 - 80 micron confirming to AAmA 2604 (RAL color as per Architect's approval). The non visible aluminium surfaces shall have minimum chromotizing treatment. The quote rate shall include all design, engineering & shop drawing approval from architect & consultant, mock-ups, sample submission, handling of all materials (loading, unloading, shifting, etc), scaffoldings, access equipments etc. The quote rate shall include all duties, statutory obligations and safety code compliance as per Industry standards.The 4mm thk ACP consists of 0.5mm outer skin of Aluminium with Lumiflon based fluorocarbon paint or kynar 500 based PVDF paint confirming to AAmA 2605 + 3 mm Fire rated 70% mineral filed core B Class + 0.5 mm aluminium skin with service coat. The panel shall be designed for 8-10 mm groove in horizontal & 8 to 10 mm groove in verticals with close joint system. Vertical & Horizontal groove shall be filled by non staining non bleeding high performance weather sealant. ACP panel shall have aluminium cleats all around panel, L Angle 12x1mm the at corner joints and aluminium stiffner profile as per structural requirements. The groove shall have aluminium channel as per tender intent drawings. Design, Fabrication, Supply, installation, protection, cleaning & handover of 4 mm thk. Aluminium Composite Panel cladding of approved make having shade as per architect's approval using grid work of prefabricated aluminium extruded tube sections of size 38 x 38 x 2 mm thk. to with stand the design wind pressure confirming to IS -875 part III. The fastening brackets of Aluminium alloy 6061 T5 / mS with HDG with serrations and serrated washers to arrest the wind load movement, fasteners and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing in conjunction with BOQ. Standard sheet sizes with minimum wastages need to consider.Fabricator can't change the divisions & grid after award of cntract. Cost to include 3 mm thk. GI sheet Gutter as per tender intent drawings.

Prefabricated grid mullions are fixed on to the RCC and concrete masonry walls with SS 316 anchor bolts as recommended by approved supplier to support given design loads. The brackets shall have provision movement to accommodate the construction tolerances with +- 25 mm plumb in case of RCC structure and +- 25 mm plumb incase of steel structure . Use of Hot Dipped galvanized brackets with serration and serrated washers to prevent wind direction movement after final postion. The design shall accommodate the building movements, thermal expansion and seismic movements. The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard from approved extruder. All the internal & externally visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 - 80 micron confirming to AAmA 2604 (RAL color as per Architect's approval). The non visible aluminium surfaces shall have minimum chromotizing treatment. The quote rate shall include all design, engineering & shop drawing approval from architect & consultant, mock-ups, sample submission, handling of all materials (loading, unloading, shifting, etc), scaffoldings, access equipments etc. The quote rate shall include all duties, statutory obligations and safety code compliance as per Industry standards. aluminium skin with service coat. The panel shall be designed for 8-10 mm groove in horizontal & 8 to 10 mm groove in verticals with close joint system. Vertical & Horizontal groove shall be filled by non staining non bleeding high performance weather sealant. ACP panel shall have aluminium cleats all around panel, L Angle 12x1mm the at corner joints and aluminium stiffner profile as per structural requirements. The groove shall have aluminium channel as per tender intent drawings. Design, Fabrication, Supply, installation, protection, cleaning & handover of 4 mm thk. Aluminium Composite Panel cladding of approved make having shade as per architect's approval using grid work of prefabricated aluminium extruded tube sections of size 38 x 38 x 2 mm thk. to with stand the design wind pressure confirming to IS -875 part III. The fastening brackets of Aluminium alloy 6061 T5 / mS with HDG with serrations and serrated washers to arrest the wind load movement, fasteners and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing in conjunction with BOQ. Standard sheet sizes with minimum wastages need to consider.Fabricator can't change the divisions & grid after award of cntract. Cost to include 3 mm thk. GI sheet Gutter as per tender intent drawings.

Removal of Existing Cladding - Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade,camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Planting large flowering/ Shady trees :- Digging pit with size 0.90 × 0.90 × 0.90m. Removing & conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30Rmtr. and remaining height of 0.60Rmtr with fresh garden soil & manure up in 3:1 proportion. mixing soil and manure thoroughly well leveling, as directed Watering on previous night. Planting one to two year old minimum 2 Rmtr. height healthy plant sapling as per specification. maintaining till well established by watering, weeding, stirring, of soil and manure replacing casualties etc. complete. Cassia fistula

Fox tail Palm

Peltophorum pterocarpum

Delonix regia

Lagerstroemia speciosa

Tabebuia rosea

Spathodea campanulata

Preparing Shrubbery:- Excavating the ground to a required depth of 30cms. Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a height of 30cms. mixing garden soil and manure thoroughly well. Leveling, Watering on previous night. Planting well - rooted shrubs 0.5Rmtr. apart as directed and maintaining till well established by watering, weeding, stirring, replacing casualties etc. complete. Preparing Ground cover:- Excavating the ground to a required depth of 20cms. Removing & conveying unwanted stuff rubbish to the required distance as directed. Filling the Excavated area fresh garden soil & F. Y. manure in 3:1 proportion to a height of 20cms. mixing leveling. Watering the same previous night. Planting suitable ground cover as directed in staggering pattern, distance between two rows 25cms. Watering & maintaining till well established. Dypsis lutescens

Dracaena marginata

Acalypha wilkesiana

Ixora duffy

Duranta repens

Valeriana wallichii

Hibiscus rosa sinensis

mussaenda erythrophylla

Nerium oleander

Pentas

Allamanda

Hemelia Patens

Croton

Dianella ensifolia

Canna Indica Drawf

Amaryllis belladonna

Hymencollis

Tradescantia zebrina

Wadelia

Preparing Instant Lawn :- Excavating the ground to a required depth of 20cms removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure are in 3:1 proportion to a height of 20cms. mixing garden soil and manure thoroughly well leveling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling etc. complete.

Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 70 km. considered Excluding royalty.)

Supplying on site well farmyard manure i.e. decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 50 km. considered.)

mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species; lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover.

Providing and wartering of irrigation water through water tanker of Horticulture features i.e. lawn, tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit. capacity with one labour for watering i/c cost of water, filling of tanker, wartering at site with all leads and lifts as per direction of officer-in-charge.

Providing and fixing processed stone cladding on wall surface/plywood surface. RCC pardi/wall and all type of interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of processed clay, woodedn chips, silica sand, cement, GFRC admixtures, colour pigments fiber up to thick of 230 mm/25mm including scaffolding fixing of screw, etc. (As directed by Engineer) Location : Compound wall.

Providing and laying in-situ m40 Grade unreinforced plain cement concrete pavement over aprepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) conforming to IS383, using fine and coarse aggregates combined gradation as per Table 600 - 3 of mORTH Specification 2013, mixed in a batching and mixing plant / nontilting mixer and Weigh batch eras per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vatain cement mortar 1:8 @ 0.6m X 0.6m centre to centre, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed offine fine aggregate (natural sand / crusheds and VSI grade finely washed etc.), compacting and proper embedding / laying of interlocking paver blocks in to the fine aggregate (naturals and / crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (naturals and / crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (naturals and / crusheds and VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of m-35 grade concrete with approved colour and design & pattern.

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.1.For laying additional cable in same trench add Rs. 45/- per metre for additional bricks between and above the extra cable. 2.For laying additional cable in same trench above 25 Sqmm, bricks shall be laid width wise above the cable. rate shall be increased by Rs. 48/- per meter

Supplying and erecting integrated LED street light fitting 18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/FLS2.

Spike Light, NSL-9S, LED, 7-9W, LED, 3000k, IP 65 Body-Die-casting aluminium Body with screen in tempered glass.Body colour-RAL 9005 matt , Electronic Driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 65 protection ,CRI > 80, voltage input AC240V.Dimension - 100mm (Dia.) x 300mm (D), Weight-1Kg. Estimated Lifetime-L70 @ 50,000hours minimum.

Providing a Fiber Reinforced Plastic Round Planter - 36"x36" Grey Color

Benches: Public Seating Chair. - 3 Seater Providing and Fixing 3seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (SSR-2022-23)

Providing, fabricating and fixing in position mS Sliding gate made of mS box sections, Flat, channel as detailed in drawing etc, including cutting, welding, grinding, providing hinges,handles, locking arrangements, heavy duty polymade track rollers, applying two or more coats of approved color & shade synthetic enamel paint over a coat of anticorrosive paint for all the steel surface, waxing, etc complete all as per specification, drawing and direction.

Providing and Installing Boom Barriers at Entrance Gates and Basement Parking entrance and Exit as per design : Supply Installation, Testing and Commissioning (Supply, Installation, Testing & Commissioning) of 3Rmtr Boom Barrier (Enterprises-SBA-600) (695 Market Rate)

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc

Removing wire fencing with wooden post and stacking the material with all leads, liftsetc. complete.(Dismantling of main gate)

Removing existing false ceiling /cornices/ Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc.complete.

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Lowering down the debris obtained from breaking and removing the cement plaster/burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS: 2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc.Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects etc. with 4 operations in a year and monthly check up.

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the main Runner, 1200 mm and 600 mm Cross Tees. products approved as per GRIHA and BS 476 etc. complete.

Providing and Laying Siporex-bat coba system, comprising of 25mm thick Cement mortar 1:3 base coat, siporex-bat coba filling and 25mm thick, Cement mortar 1:4 top-finish coat. The mortar for the siporex-bat coba filling shall be Cement mortar 1:4 and admixed with integral waterproofing compound and mortar plasticizer, all as per manufacturer's specifications curing, complete. The top-finish coat shall be broom-finished suitable for laying tiles. The cost should include sealing the annular space between the pipe and the masonry as per manufacturer's specifications, making khurras of required diameters in mS, river sand screened and washed, at all leads, lifts, heights, scaffolding, with proper slope to drain-off water entirely, complete, etc. Curing shall be done for 7 days by ponding with water. For thickness of 300 mm raised floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing and applying plaster/wall punning with plaster of paris (with plaster of paris material) in 10 to 13mm thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring

Providing and laying ceramic tiles for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.m. 1:3 curing and cleaning etc. complete

Providing and fixing Italian marble Slabs for flooring of uniform colour with 18 mm thick +2mm tolerance machine cut, machine polished in nominal sizes, as per drawing & pattern including average 30mm thick cement, sand mortar bedding (1:4) close jointed & floated with matching cement slurry laid to level as required, curing complete as per specification, machine polished cleaned complete. No extra will be payable towards wastage due to material pattern. Please note that payment will be in Sqm of finished floor area only. Rate to be applicable for all levels & heights. No extra is payable for additional thickness of bedding to match adjoining floors, as per directions of Engineer – in – charge. The item includes complete finishing of the flooring with tin oxide polishing. Basic rate Rs 600 per sqft

Providing and Fixing in position 100 mm high Approved Dark Italian marble in approved colour and shade for Skirting in approved pattern to true line and level on average 20 mm thick backing coat plaster in 1:4 mix cement sand mortar, 1:1 cement grout filling the joints with white /colour cement including edge moulding, edge polishing, cleaning, watering, curing etc. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Basic rate Rs 600 per sqft

Providing & fixing in position Stage flooring made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% anti termite treatment on wooden stage.

Providing & fixing stage flooring frame of staggered layers/Market Rate Ply 12mm thick Market Rate ply of approved make like century, Duron, Green ply, merino or equivalent fixed to natural wood frame work of approved size fixed at 300 mm c/c both ways The nature wood framework to be supported cleat pads & held in position by 35x35x5 mm angle cleats of 75mm length at 1200 mm centres. The wooden framework to be filled with 25mm thick thermal bonded polyester wadding micron fiber of 1000 gm/Sqm (make: mikasha/ Nowofill / Vibrant or equivalent) held in position with 18mm 24 SWG chicken mesh fixed on the bottom of the wooden framework with necessary screws and washers. The cleats to be given two or more coats of zinc chromate primer. The cleat to be prewelded to the & screwed to the wooden framework with necessary screws.The work shall be executed as per drawings ,specifications & instructions of engineer in charge.

Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. For Outdoor Vitrified Tile of size 300mm x 300mm

Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS.15622-2006 (groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. For Vitrified Tile of size 600mm x 600mm

Providing and laying vitrified mirror/glossy finish tiles decorative type having size 1200mm to 600mm x 600mm to 605mm of 8 to 10mm thickness and confirming to IS.15622-2006 (groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. For Vitrified Tile of size 1200mm x 600mm

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for Flooring/dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete. For Anti - Skid Vitrified Tile of size 600mm x 600mm

Providing and constructing Granite Platform as per detailed drawing including cutting & fixing (Platform size 5.00 m x 0.40 m)

Providing & Fixing in position, Carpet more than 800+ gsm, made with 100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete

Providing, fitting and fixing Laminated abrasion resistant wooden flooring of thickness not less than 8.2mml laid on existing concrete floor with underlayer of approved transparent polythene and foam sheet to make the floor surface even and sound free complete as directed and specified.

Providing & Fixing in position, Anti Static Vinyl Flooring of approved make and shade in roll form over prepared existing surface and joined to make it seamless, at all levels, as per manufacturers specifications including coving rounded junction between floor and wall. The rate shall include all cutting and wastage, cost of all materials, adhesives etc. complete. Before laying, the existing flooring should be made free from dust and undulations. The finished flooring should be free from air bubbles and thoroughly cleaned without undulations, complete and as directed. Rate to be inclusive of 150mm high coving at skirting lvl.

Providing and laying vitrified mirror / glossy finish tiles having size 1200 mm to 600 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete For Vitrified Tile Dado for Toilet of size 1200mm x 600mm.

Providing and laying vitrified mirror / glossy finish tiles having size 1200 mm to 600 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete For Vitrified Tile Dado for Wall of size 1200mm x 600mm.

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thk of 230mm/ 25mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge) For Column Dado covering in Techlam Sheet

Providing and fixing teak wood 25 mm thick & 125 mm high wooden skirting. The work shall be executed as per drawings, specifications & instructions of engineer in charge.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and fixing modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.

Providing and fixing in position Gypsum Bison Board False Ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and fixing modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.

Providing & fixing of horizontal level suspended ceiling comprising of Vertical Linear metal Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100 x 25 x 3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black & White). The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron.The powder coating shall pass Salt Spray Test for 750 Hours as per ASTm B117, QUV –A Test for 1000hours as per ASTm G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5 at 60˚ as per ASTm D523 (Notapplicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps..SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 2800x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-80micron. U- Profile to be connected to Nos. other using U –Profile Splice. The U- profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger. The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a manufacturing Test Certificate.

Providing & fixing Acoustical Ceiling Tile 15mm thickness, Black Color square edge tiles, Easily demountable, manufactured from high density glass wool. Visible surface is a matt black batch painted glass tissue and the back of the tile is covered with glass tissue. Size 600x600x15mm, 1200 x 600 x 15mm. manufacturing - Acoustics-Sound absorption(Alpha W) - 0.95 at 200 mm o.d.s Acoustics - Sound absorption Class - Class A at 200 mm o.d.s. NRC - 0.9 NRC at 200 mm o.d.s as per ASTm C 423 Humidity Resistance - Permanent ambient RH upto 95% at 30 * C without sagging, warping or delaminating (EN 13964:2014). Fire Safety-Tested and classified as non combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501 -1 -European Standard. maintenance - Weekly dusting, vacuum cleaning.

Providing and Fixing make modular single glass full height partition as per Standard Double Glazing 100mm Thick Aluminium Framework SLENDER-25mm x 50mm system at Top, bottom and sides, Including 10mm Clear oughened glass, Including Gasket & Glass to glass vertical I, T & L joints to be stick by VHB tape, Including 50mm x 50mm Aluminium Pole after every 2-3 glasses, The profile will be 10-12mm microns (Silver anodized) Sound Transmission Loss of 32 DB approx.

Providing and fixing in position Aluminium Frame Work for partitions, paneling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc so that lateral movement is arrested. as per instructions of Project - In - Charge. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to floor ceiling, Angle Support to ceiling. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. (Actual executed area will be measured) SIZE 25 x 25 x 1.62mm

Providing and fixing in position Approved marine Grade Plywood of approved quality & make for partitions, facias, skirtings, wall paneling & soffit etc as per required width and size or as per drawing. Including cost of making openings for switches, AC facias with the help of adhesives like fevicol etc, nails/ screws etc and providing openings for wiring and necessary screws etc. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In -Charge. (Actual executed area will be measured) 12mm thick (material rate considered from DSR + 40% labour considered)

Providing & fixing wooden framework around the existing Artwork of thickness of 38mm x 25mm finished in Pu polish (matt).

Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge

Providing and fixing of wall panel using 9mm thick Acoustic Panel with Fabric wrapped of size 600 x 600/ 1200 x 25mm, Class A fire rating as per ASTm E 84.The 9 mm thick Acoustic Panel are made from 100% polyester fiber(60% is recycled). The 9 mm thick Panels are pasted on flexi ply surface (using any acrylic adhesive such as fevicol SR998 or hot melt adhesive) as per design of the architect.Flexi ply to be made of using wooden framework as per design. On the surface of 9mm TAP panel 2mm thick Polyester felt having width of 1.2Rmtrs /1.5Rmtrs to be evenly pasted on the PET surface and finished. Edge bidding or profile to be fixed. Technical Parameters of the Panels are: Surface finish: matte, Density: 200Kg/CUM ,Thickness: 9mm, Acoustic: NRC Upto 0.9,Fire Rating : Class A ASTm E84 -08 ,Termite resistant, Hygiene( VOC )-Low,Thermal Conductivity: 0.034 w/m.k , completely non toxic and itch free, IGBC Certified Green Product, GRS Certificate.

Supply & installation of Wooden Slate Panel made of pinewood E1 grade fiberboard, melamine finish, grooved perforated slats with varied spacing of grooves on single panel, L16-2 (2mm grooves @ 16mm centers) and L32-2 (2mm grooves @ 32mm centers), rear perforations 10T16S & 10T32S backlined with black acoustic fleece, tongue-groove edge for a seamless look, 1-test FR grade, size 192x2440/2420x16mm, volume density of base board 700Kg/Cum, weight 11Kg/Sqm installed by using framework system. sectional thickness 0.55mm, length 3600mm, web 50mm, depth of 25mm and equal flanges 15mm is fastened to the wall positioned horizontally/vertically at every 600mm centres. aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & center brackets is then fixed perpendicular to the Strut CC25 with the help of fasteners at every 400mm centers Slats Vario Lite of size 128/144/192 x 2440/2420 x 16mm in then fixed perpendicular to Strut CC18 with suitable edge & centre brackets. Overall dept of system 59mm Contractor to provide expansion joints of 3mm at every 4880mm length wise and 4992mm width wise. Technical Parameters-Fire (Class) – 1 & P, Acoustics – NRC upto 0.8, Thermal (W/mk)– 0.07, Climate (°C, RH) – 50, 70, Light (%) – Colour Dependant, Green (VoC, RC %) – Low, 25.

Supply and Installation Stage Acoustic of Strand Fila melange,shade ebony,Kerfed edge, magnesite bonded 0.8mm wide pinewood fibre core panels ,GreenPro certified,of size 600x2400x20mm, volume density 400Kgs/Cum, weight 8 Kg/Sqm installed by using Strut framework system with Strut H?Spline. The Strut framework systems includes Strut CC50 thickness 0.55mm, length 3600mm, knurled web 50mm, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centres.Strut H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 at 600mm centers. The long edge panels shall then be inserted into the Strut H-Spline along their long edges of 2400mm to perfect fit with staggered short edges. The system is backlined with the acoustical infill SynthPF 10x50 adhered on wal with dab spots of Stick S7.Technical Parameters - Fire (Class) – 1 & P, Acoustics – NRC 0.8 (For 20mm and 25mm thk), Thermal (W/mk)– 0.07, Climate (°C, RH) – 50, 95, Light (%) – Low• Green (VoC, RC %) – Low, 30

Providing & fixing of Decorative Baffle Panel horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black & White).. The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron.The powder coating shall pass Salt Spray Test for 750 Hours as per ASTm B117, QUV –A Test for 1000hours as per ASTm G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5 at 60˚ as per ASTm D523 (Notapplicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps..SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 2800x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-80micron. U- Profile to be connected to Nos. other using U –Profile Splice. The U- profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger. The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a manufacturing Test Certificate.

Providing and fixing 6 mm thick machine Cut mirror of approved make for mirror Panelling. (mirror shall be free from and cracks, damamges. and patches ) with 50mm x 20 mm - 2mm thk Stainless steel brush finish border frame all around fixed with to 19mm thk marine ply base with Silicone .The ply is screwed to the plastered wall . Work to include necessary electrical wiring for light fixtures all as per detail drawings and site engineer instructions. (Provisional Quantity)

Supply and Installation of fabric backing WallPaper of approved shade with recommended adhesive of approved make which have 100% washable, scratch resistance, peel proof, and fire retardant properties. The wall paper should give a seamless finish. Cost to include preparation on the punned surface for receiving the wall paper as per the manufacturer specification. Basic Rate of Wall paper to be Rs. 1500/Sqm exclusive of all taxes and installation. Cost of material mentioned is the cost of materials, all taxes, and delivered at site inclusive of all octroi, loading-un-loading.The cost for wall papers to include 6mm wide Aluminium "U" Channel at the junction of wall paper and plain painted areasThe cost for wall papers to include Gypsum Edge guards at the edges of partition

Providing and fixing 20 mm thick Laminated sheet board Pelmet box 150 to 200mm wide to doors or window frames including 20mm dia. Aluminium curtain rod with sockets and finishing with french polishing (without top) etc.complete.

Providing & Fixing 75 mm thk Prosccenium Partition on m S frame with both sides 12 mm thk ply as per drg. 50 x 50 mm m S Box section including welding treated with one coat of red oxide and two coats of black paint paint at 600 mm c/c. in both directions. Frame shall be covered by 12 mm thk ply finish with paint on both side as approved by Architect, Including 50 mm thk, 48 Kg/Cum density Rockwool in between frame work Anti-termite treatment to the internal surfaces of wooden frame and back side of ply by Aldrex complete with scaffolding, leveling etc. (minimum 2 coats) work will be carried out as per drg & instruction of acoustic consultant/ Engineer In Charge/ Architect.

Providing & Fixing 75 mm thk House for Curtain Partition on m S frame with both sides 12 mm thk ply as per drg. 50 x 50 mm m S Box section including welding treated one coat of red oxide and two coats of black paint at 600 mm c/c. in both directions. Frame shall be covered by 12mm thk ply finish with 4 mm thick VENEER of approved make and shade on one side. One side finished with paint as per approved shade with levelling etc work will be carried out as per Including 50 mm thk, 48 Kg/Cum density Rockwool in between frame work Anti-termite treatment to the internal surfaces of wooden frame and back side of ply by Aldrex or equivalent complete with scaffolding, leveling etc. (minimum 2 coats) work will be carried out as per drg & instructions of acoustic consultant /Engineer/Architect.

Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no Nos. leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut?Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face laminate 4 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 147.a - D1 - 600 x 2400mm, Single leaf door 147.b - D2 - 650 x 2400mm, Single leaf door 147.c - D3 - 700 x 2400mm, Single leaf door 147.d - D4 - 750 x 2400mm, Single leaf door 147.e - D5 - 800 x 2400mm, Single leaf door 147.f - D6 - 850 x 2400mm, Single leaf door 147.g - D7 - 900 x 2400mm, Single leaf door 147.h - D8 - 950 x 2400mm, Single leaf door 147.i - D9 - 1000 x 2400mm, Single leaf door 147.j - D10 - 1050 x 2400mm, Single leaf door 147.k - D11 - 1150 x 2400mm, Single leaf door 147.l - D12 - 1200 x 2400mm, Single leaf door 147.m - D13 - 1300 x 2400mm, Single leaf door 147.n - D14 - 1350 x 2400mm, Single leaf door 147.o - D15 - 1500 x 2400mm, Single leaf door 147.p - D16 - 1700 x 2400mm, Single leaf door 147.q - D17 - 1800 x 2400mm, Single leaf door

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 125 mm x 65mm

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.m. 1:6 including filling joints with polymer base filler Nos.ing/moulding the sharp edges wherever necessary, curing, etc. complete.

mETAL DOORS (Fire Door) 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2hr frl (120/120) 3 Criteria - Integrity / Insulation/ Stability Wooden Door - Fire Door Tested in accordance to IS: 3614 Part 2. with prior approval of concerned Superintending Engineer. Providing of 120 min Fire rated lead lined doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non-Combustible by Nature"). Lead lined to check radiation. Code No; 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2HR FRL (120/120) 3 Criteria - Integrity / Insulation/ Stability Wooden Door - Fire Door Tested in accordance to IS: 3614 Part 2.a) Double Leaf Door of Size 2000mm x 2400mm

Frame: Providing Frames for Lead Lined Fire resistant door shutters 1st class malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 140 X 70 mm with 45mm thick two layered 3mm Lead Line Sheets with 10mm overlap from either side & spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed in the groove of the Frame for fire and hot and cold smoke sealing, etc. complete as per direction of Engineer in Charge b) Shutter: Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and Fixing 10mm thick clear toughned Double Leaf Glass Doors of size 1500mm x 2400mm with approved SS floor springs, locking arrangements, SS handles etc. complete

Providing and fixing solid core flush BI Fold Door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face laminate 4 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Hardware fo the above Fold 80EF - Kit for 2 doors

Fold 80EF - Top track 3m

Ball Bearing Butt Hinge SS304 102 X 76 X 3mm (4 X 3 X 3) Square Corner With Timber Door Screw SSm

Hatti door to be customised size of 7’x12’ to be made of 50x50mm aluminium framework, 600 x 600mm grid to be cladded with 12mm thk ply to be finished with 1mm thk laminate on both the sides,Gap between aluminium grid to be filled with glass wool insulation,Rate to be included with all heavy duty hinges suitable for door weight,external door closer,handle,lock etc as per detail design and complete satisfaction of site in charge Hardware -

Automatic Drop Down Door Seal 600 mm Cut To Size 380 mm

Automatic Drop Down Door Seal 820 mm Cut To Size 600 mm

Automatic Drop Down Door Seal 920 mm Cut To Size 820 mm

Automatic Drop Down Door Seal 1070 mm Cut To Size 920 mm

Automatic Drop Down Door Seal 1220 mm Cut To Size 1070 mm

Providing Granite Window sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, moulding edges, cleaning complete.

Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed.

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hrs. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller. Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21%. After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9% with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.(With prior approval of S.E.)

Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the manufaturer The work should be done by the manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

Providing & applying following types of Decorative paint / Texture paint of approved make for internal gypsum / POP surface to be applied as per manufacturer's instructions & methodology as directed by Architect including preparing the surface, p/a one coat of water base PVA primer (copolymer based alkali resistant primer with fungicide) and two coat of water base acrylic putty, sanding, light sanding, scaffolding, work platform, painting equipment / apparatus etc. required to complete interior grade finish with 3 coats of approved shade colour etc. complete as directed by the Pm at all heights & levels to his entire satisfaction.

Providing and applying interior ceiling finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hrs. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller. Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21%. After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9% with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.(With prior approval of S.E.)

Providing and fixing DB Shutters in fire rated ply as per detail drgs and finished in approved shade laminate on exposed surface and balancing laminate on the interior surface with PVC edge banding from Rehau make or matching colour polish. Rate to be inclusive of required framework in seasoned sal wood and finished in colour polish matching the colour of the laminate. Rate to be inclusive of approved stainless steel hardware of approved make as per detail drgs. Rate to be inclusive for above the storage upto the false ceiling ply boxing finished as per shutter.

Providing & Fixing Dressing Table of size 400LX 400DX 1800H.The Dressing table unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t).The mirror has been pasted using high quality 3m sticker.

Curved seating bench at entrance lobby Providing & fixing 12mm flexi ply finished in 4mm thk Veneer finished in -Pu polish, with 50mm x 25mm aluminium Framework.

Providing and executing Ledge (900mm X 300 mm) to be made of commercial ply finished with 6mm thk approved Corian & support should be taken on mS powder coated Angle frame provided at every 750mm length as per the detailed design & instuctions of the Architect. Considering in make up room running counter

Providing and constructing Console of Low / medium Height Factory Finished Storage size (400mm Depth X 750 mmX 1200mm long ), with top, shutters, sides, bottom, back, skirting, all vertical and horizontal intermediates in approved marine Ply of approved make as per detail drgs. All external surfaces to be finished in approved 1.5 mm thick Laminate. All exposed edges to be in Polsih matching to the approved Laminate

Providing and fixing 600mm wide Kiosk Counter with top finished in minimum 18mm thick approved shade and sample pre-polished granite slab laid on 19mm thick BWP marine grade Ply of approved make, ply shall be properly anchored and grouted into walls. The supports to be in 19mm thick BWP marine grade Ply verticals @ 600mm c/c or as directed. Providing and fixing, 100mm high front facia and 150mm high band above the counter top of same shade granite. All exposed surfaces of platform to be finished in same granite slab. Necessary cut-outs for wash basin to be provided and all cut-outs, exposed edges to be half round bull Nos.ed with mirror polished. Cost to also include making necessary cut-outs for taking pipes through counter top. Basic Rate of Pre Polished Granite to be Rs. 2000 per Sqm. Cost to also include of providing 100mm high raised platform in brickbat coba, with Skirting as per detail drgs. All vertical surfaces of wall / Partition below counter top to be finished in 300mm x 300mm second grade approved make white colour ceramic tiles in cement mortar 1:3. Cost to also include making necessary cut-outs for taking drainage pipes and Nahni traps in raised platform, all completed and finished to satisfactory conditions.Cost to be inclusive of shutters of 19mm thick BWP marine grade Ply finished in approved shade laminate on exposed surface and balancing laminate on internal surfaces inclusive of necessary teak wood beading and frame work finished in matching colour polish matching the shade of the laminate or as directed, Cost to be inclusive of horizontal shelves in 19mm thick BWP marine grade Ply finished in approved laminate. Hardware to include dead locks with SS finished keyhole, brush SS finish handle, SS tower bolt, magnetic ball catches etc. complete.

Providing & exicuting Salon Chair of Steel Frame manufactured in CNC machines and joined on fixture mIG Welding with accuracy and low tolerance L(W) 620mm H 940/1200mm-Prof.(D) 650mm- H(seat)-600/860. Steel Frame manufactured in CNC machines and joined on fixture mIG Welding with accuracy and low tolerance. CMarket RateH Foam Injection molded, Average Density 50-55 Kg/m 22.5 Kgs " L(W) 620mm H 940/1200mm-Prof.(D) 650mm- H(seat)-600/860 " (Volume 0.3) CBm "Available in Leatherette (Leather available on specific request at extra cost)"

Providing and supplying mesh low back task chairs with adjustable height and back rest. The base to be heavy duty chrome or Synthetic base with heavy crome legs. Considering for Office Visitor Chairs.

Providing and supplying PU finish mid back task chairs with adjustable height and back rest. The base to be heavy duty chrome or Synthetic base with heavy duty castors. Considering for Office Task Chairs.

Providing & supplying sofa seatings - Structure made of treated agro wood, fitted with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with premium quality PU cloth with help of stitching,. Overall appearance as per approval. a) Sofa Type 1 Seater : 750 X 850mm

b) Sofa Type 2 Seater : 1800 X 750mm

Providing and executing Center Rectangle Table made of Italian marble top frame 19 mm commercial ply board with good quality of Veneer/Laminate finish of size 1050X750mm.

Providing and executing Center Side Table made of Italian marble top frame 19 mm commercial ply board with good quality of Veneer/Laminate finish of size 600X600mm

Providing and fixing Wash Basin counter with 800mm wide x 2400mm Long x 15 mm thick Vitrified Full body Tile Slab with 200mm high facia , including making cutout for drain pipe & CP fittings, Wash hand basin .Vitrirfied Slab sticked to 19mm thick marine ply with adhesive. m.S Angle of 75 x 75 x 4mm of approved size to be fixed on wall with bolts and fastners at 750mm c/c .Exposed edge to be 35mm high moulding with chamfer edges .All as per detail drawings and site engineer instructions.

Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.

Supply & Installation of Profile LED Steplight in 4'10" Length, (Priced in 5 ft Slab) Colour - Blue, Steplight in Nos. Unit Compleate With 25mm PVC Conduit With Single Core Wire, Cheeping 50mm in Floor Closed With Required cement plaster finished with a floating coat of neat cement of mix 1:4.

Providing and fixing in position Wooden mouldings out of T.W moulding of size 15 mm x 15 mm size complete as per profile given in the detail drawing or as explained out of wooden sections of sizes given below. All should be finished with melamine polish of approved shade & colour with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of any other item as mentioned in the Bill of Quantities and not measured under any other item etc. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project -In - Charge. (Actual executed area will be measured)

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone Urinal Partition with full moulding the edges etc. complete . Both side polish

Providing and fixing Rolling Shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep m.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, m.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of m.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

Providing and fixing mild steel grill Railing 15 Kilogram/Sqm with Ghanateak wood hand rail of size 75mm x 60 mm and sill of 75mm.x 25mm and newel posts for staircases,including fabricating, fixtures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colours and polishing the sill, hand rail and the newel post with french polish

Providing and Fixing Rollar Blinds AmI make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Providing and fixing Trap door in the false ceiling for HVAC in 19mm thick marine plywood finished in 1mm thick approved laminate on the exposed side and exposed side of shutter in approved shade laminate and other in balancing laminate, inclusive of 19mm thick marine ply framework finished in colour polish matching the shade of the laminate. All the edges to be of teak wood lipping and finished in approved melamine. The rate to be inclusive of necessary 19mm thick plywood support from ceiling, locking mechanism etc. complete.

Providing and fixing 25mm wide stainless steel T-section Transition Strips flashing, 2mm thk conforming to 304 grade as covering for the junctions of all hard floorings and carpets or as directed etc. complete.

Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6" x 9" for Room Titles, designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Nos. signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge.

Fire exit Signages - Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system

Providing and fixing in location as diected by Engineer in Charge, accessible modular Wayfinding and Navigational Signage system comprising of ADA and Harmonised Guidelines compliant sigange and wayfinding elements, in multilingual, tactile and braille format. Sigange systems to be designed for entire building / complex under consideration.

Design, supply, fabrication and fixing of SS, non glare Notice Signage board of size 600mm x 900mm for the accessible parking, as per the approved design and make, having 1.2mm thick SS non glare base plate and Grade 2/Grade 1 Braille (raised dots) to be etched/engraved and be raised 0.5mm above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/engraved and signage to be installed at a height of 2100mm from the ground level using a post of mS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per accessibility standards and up to the satisfaction of the engineer in charge.

Providing & arranging Abstract canvas Paintings with a acrylic paint of size 36" x 48"

Providing & arranging Granite Plaque of Black granite with natural flecks of rechangle shape. Laser Engraved - top layer is struck by a laser leaving a permanent gray mark, or Color Printed - ink is printed on the surface.

Providing & fixing Observation Window 12mm thick Flexi mdf with 50mm x 50mm aluminium & salwood framework in approvewd paint

Supply & installation of designer Security Cabin made out of marine grade composites (marine grade corrosion resistant & Hydrocarbon solvent resistant). The Inner Column Frame made of 76 mm OD mild steel pipe as per IS: 1161 or IS: 1239 hot dip galvanized 65 microns, postfabrication. The gap between galvanized pipe & the FRP Security cabin shall be supported with proper frame work for better stability. The HDGPipes & cladded with glass reinforced polymer using Unsaturated Polyester resin along with 300 & 450 GSm Emulsion Chopped Strand mat comprising Viscosity @ 25°C should be 300 to 400 cps with Acid Value of 25 mg KOH/g. Volatile Content of 35%. Specific Gravity 1.12 @25°C.Barcol Hardness of 30-35, heat deflection temperature of 60-63°C weather ability, heat resistance, chemical resistance, and electrical properties. The Glass Fibres complies with DIN EN-2.2 & DIN EN 10204-3.1. The camouflaged FRP grooved sheets side wall of the cabin. The top roof of the security shall be designed to have proper rain protection during the rainy season and shall be assembled at site with the help of modular bracket with suitable SS hardware. PU paint treatment for a classic surface finish. All hardware is of stainless steel. The product is an all Weather proof & maintenance free. It's self-coloured textured surface finish with scratch resistant, aliphatic grade UV. Stabilized PU paint with UV stablePolyurethane 120 S+/-5 viscosity aliphatic paint, with minimum standing life of 5 years. These security cabin shall be individually hand crafted to replicate steel and cast iron. All hardware is in SS. The security cabin shall be supply with normal power socket light tube for lighting. The size of the security cabin shall not be less than L1200mm X w12000 X H2400 (+-50mm)

Restoration of Stage Old Curtain & wooden framing around it to be polished with approved shade.

Providing & fixing Ram Ganesh Gadakari Rangaytan Letter in 3 mm Acrylic to Acrylic Full Body Letter. as per Prescribed fonts, Style, Letter and Description. Lit-up Signage asper design Intent. Using LED of approved colour and wattage. LED lights and Driver and all associated components shall be suitable for the outdoor use. LED and LED Driver having 1 year warranty. (1 Set at TOP of the Building & Other Set on the Entrance Wall (Side Corner as per shown in the drawing) RAm GANESH

Providing & fixing Ram Ganesh Gadakari Rangaytan Letter in 3 mm Acrylic to Acrylic Full Body Letter. as per Prescribed fonts, Style, Letter and Description. Lit-up Signage asper design Intent. Using LED of approved colour and wattage. LED lights and Driver and all associated components shall be suitable for the outdoor use. LED and LED Driver having 1 year warranty. (1 Set at TOP of the Building & Other Set on the Entrance Wall (Side Corner as per shown in the drawing) GADKARI

Providing & fixing Ram Ganesh Gadakari Rangaytan Letter in 3 mm Acrylic to Acrylic Full Body Letter. as per Prescribed fonts, Style, Letter and Description. Lit-up Signage asper design Intent. Using LED of approved colour and wattage. LED lights and Driver and all associated components shall be suitable for the outdoor use. LED and LED Driver having 1 year warranty. (1 Set at TOP of the Building & Other Set on the Entrance Wall (Side Corner as per shown in the drawing) RANGAYTAN

Suppy, Installation, Testing and Commissioning of mS Fabricated Catwalk - FOH (Front of house Bar) to be designed as per site condition with clamps and requisite fastners. Provision for lights fixing on FOH has been provided.

Electricals & DmX signal control for FOH Bar.

Providing & Fixing 100mm x 50mm mS frame work fixed with Deck slab, finished in Approved Carpet mS Framework

making openings in walls for Cable trays, AC ducting, Copper piping, Fire fighting etc. without damaging the surroundings and making good the affected areas with smooth plaster in mix proportion 1:4 finished in white wash paint, inclusive of lintel support in Cuddapah stone of thickness 25mm to be provided where ever required. Cost to be inclusive of filling the excess opening with brick bats and finishing the same in smooth plaster in cement mortar 1:4, proper curing, giving supports to walls, scaffolding if required, etc complete. Length of Cuddapah to be max. 1800mm and for openings which are larger than 1600mm, adequate masonry support of width 300mm to be constructed before the next Cuddapah stone is to be placed as directed by Engineer-in-charge.

Providing and fixing 6mm thick commercial ply backing of size as per site conditions on mineral fibre modular false ceiling tiles to support light fitting, speakers, CCTV cameras, diffuser of grid work size with necessary cut outs for the same.

made to Order Decorative Light - WLL/Bespoke/mBm/020 - made in glass and LED lamp

made to Order Decorative Light - WLL/Bespoke/mBm/015- made in aluminium and glass

Supply of Toilet paper Holder Recessed Type (Stainless Steel) As specified and as directed by Architect / Consultant / Project - In -Charge.

Supply of Wall mounted SS Tissue Paper Holder of size 280mm x 265mm. As specified and as directed by Architect / Consultant / Project - In -Charge.

Supply of Push Button Soap Dispensers as specified and as directed by Architect / Consultant / Project - In -Charge.

Supply of Stainless Stee touch-free infrared hand dryer with 1150W rated power & carbon brush motor as specified and as directed by Architect / Consultant / Project - In -Charge.

Supply of Towel Rack 600mm Long without Hangers as specified and as directed by Architect / Consultant / Project - In -Charge.

Supplying Pull Handle cast brass, plated gold 370 x 180 mm for both shutters approved make directed by Architect / Consultant / Project - In -Charge.

Providing and fixing Powder coated Aluminium L shape Nos.ing for step of approved make directed by Architect / Consultant / Project - In -Charge.

Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed.

Supply of 6mm SS 304 Profile of length 3m & thickness 1.2mm with Gold Finish; 7x3m=21m

Suppy, Installation, Testing and Commissioning of Fixed motorized Frill Bar - 10Rmtrs without Fabric.

Suppy, Installation, Testing and Commissioning of motorised main Curtain Track System without Fabric: main curtain track system, Electromechanical drive unit with motor & GearBox.

Suppy, Installation, Testing and Commissioning of Vertical Curtain Aseembly System without Fabric.

Suppy, Installation, Testing and Commissioning of Fixed Valance Bar without Fabric to be equiped with using dual barrel bar.

Suppy, Installation, Testing and Commissioning of Fixed stage Wings side Ladder as per the design, mS angle which is suspended from the fish plate of 5mm. Size of 600mm x 2400mm, manually movable.

Suppy, Installation, Testing and Commissioning of mS, Wing Frame without Fabric,made out of 25X25mm mS square pipe with 2mm in thickness powder coated of size 6.5m x 1.5m , with Flexi Adaptor Clamp, Extruded track Aluminium I Profile to be laid through out the dept of the stage.

Suppy, Installation, Testing and Commissioning of FIXED Cinema Projection Screeen/ Cyclorama Screen - 12m x 5m Front Side to be equiped with Drive Unit System complete with necessary Gear Box, motor with brake, Diverter Pulley system, Pulleys, Wire ropes, Drum Winding system, Requisite foundation frame. Without Fabric.

Suppy, Installation, Testing and Commissioning of (mCCP + RCP) - motor Center Control Panel + Wired Remote control Panel (For Curtain)

Suppy, Installation, Testing and Commissioning of PCJB - Power Control Junction Box and connectors for motor Drive Unit, necessary glands etc.

Installation Hardwares

Suppy, Installation, Testing and Commissioning of Fire retardant Cotton fabric 50% gathering for Vertical Curtain with approved color duly stitched and with eyelets. Size: 14.0Rmtr x 7.5 Rmtr

Suppy, Installation, Testing and Commissioning of Fire retardant velvet fabric, 100% gathering for main Curtain with approved color duly stitched and with eyelets. Size: 18.0Rmtr x 7.5Rmtr

Suppy, Installation, Testing and Commissioning of Fire retardant Velvel fabric 300% gathering for main Valance with approved color duly stitched and with eyelets. Size: 14.0Rmtr x 1.3 Rmtr

Suppy, Installation, Testing and Commissioning of Fire retardant Cotton fabric 50% gathering for Frill Bar with approved color duly stitched and with eyelets. Size: 10.0Rmtr x 1.3 Rmtr

Suppy, Installation, Testing and Commissioning Fire retardant cotton fabric for wing, with approved color duly stitched and with eyelets. Size: 7.5 x 4.1Rmtr

Cyclorama : Perforated plastic Cyclorama screen with zeroga in, off white, with eyelets alon gall four sides, perforated plastic screen with eyelets. Size : 10 x 7.5 meter

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)

Providing and fixing wall hung white wash basin of size 550 x 400 x 195 mm with pillar cock having flow rate up to 6.0 Litr/minute,C.P.Angular stop cock long thread of Jaquar/Cera/Hindware /Perryware or equivalent make, including SS bottal trap of approved make etc complete as directed by Engineer in charge.( make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 liters/minutes of equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Unloading, Storing, Safe keeping, shifting, installing, testing & commissioning of in position Coloured vertical pressure type Water Heaters (Geysers) wall mounting type of following capacities with necessary supporting brackets including providing all inlet,outlet, overflow vent connections with necessary valves /cocks complete for Instantaneous geyser

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.

Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental ( for geyser including necessary sockets/union nut etc. complete.

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc.complete

Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout of approved make including necessary sockets/ union nut etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. for internal toilet domestic & flushing line complete. (As per makeList)

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. for internal toilet domestic & flushing line complete. (As per makeList)

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.for internal toilet domestic & flushing line complete. (As per makeList)

Providing and fixing on walls/ ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.for internal toilet domestic & flushing line complete. (As per makeList)

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.for internal toilet domestic & flushing line complete. (As per makeList)

Providing and fixing 20mm Brass/Bronze/S.S. Ball valve with pressure rating of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge.(As per makeList)

Providing and fixing 25mm Brass/Bronze/S.S. Ball valve with pressure rating of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge.(As per makeList)

Providing and fixing 32mm Brass/Bronze/S.S. Ball valve with pressure rating of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge.(As per makeList)

Providing and fixing 40mm Brass/Bronze/S.S. Ball valve with pressure rating of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge.(As per makeList)

Providing and fixing 50mm Brass/Bronze/S.S. Ball valve with pressure rating of approved make with material and labour etc all complete as per drawings, specifications and directions of the engineer-in-charge.(As per makeList)

Providing, laying, jointing, testing and commissioning of 65mm dia sizes of GI medium Class ERW pipes conforming to IS-1239/ IS-3589 for domestic water application cut to required lengths with all accessories like all fittings inside the risers (threaded joints upto 50mm and welded joints for 65mm and above shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall with clamps, hangers, mS brackets (using anchor fasteners) as per specification. For pressure rating refer specification and schematics. All hangers, clamps, brackets, anchor/fixed support, guides, rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted. (As per makeList)

Providing and laying in walls/ceilings/floors 50 mm dia. medium grade having embossed as ISI mark galvanised iron pipes of 5.17 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (As per makeList)

Providing and laying in walls/ceilings/floors 80 mm dia. medium grade having embossed as ISI mark galvanised iron pipes of 8.57 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (As per makeList)

Providing & fixing heat insulation by wrapping the pipes with glass wool/asbestos fibre rope or tape/videoflex 15 mm as directed by Engineer in charge. (As per makeList)

Providing, laying and fixing P.V.C. pipe of 32mm dia.with fittings such as bends, tees, reducers, clamps, etc.including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (As per makeList)

Providing, laying and fixing P.V.C. pipe of 40mm dia.with fittings such as bends, tees, reducers, clamps, etc.including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (As per makeList)

Providing, laying and fixing P.V.C. pipe of 50mm dia.with fittings such as bends, tees, reducers, clamps, etc.including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (As per makeList)

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting suchas bends, tees, single junctions, slotted vent, clamps etc.complete. (As per makeList)

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C.soil vent/waste pipe and with necessary fixtures and fittingsuch as bends, tees, single junctions, slotted vent, clamps etc.complete. (As per makeList)

Providing, fixing, jointing, tetsing & commissioning of 75 mm dia Floor PVC cleanout plug with suitable inlet keys for opening, male threaded joint with Socket caulked to soil or waste pipe as required. (As per makeList)

Providing, fixing, jointing, tetsing & commissioning of 110 mm dia Floor PVC cleanout plug with suitable inlet keys for opening, male threaded joint with Socket caulked to soil or waste pipe as required. (As per makeList)

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use). (As per makeList)

Providing and fixing multi floor trap of 110x110mm with jali 50 mm minimum seal suitable for kitchen all complete. (As per makeList)

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (As per makeList)

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (As per makeList)

Constructing water tight brick masonry Inspection sewer chamber with Inside size 900mm x 450mm from 0.45 to 0.60m deep with first class bricks in cement mortar 1:6 (1cement :6 coarse sand), R.C.C. top slab with 1:2:4 mix (1cement :2coarse sand :4 graded stone aggregate 20mm nominal size). Foundation concrete 150mm thick 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement plaster 1:3 (1cement :3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:3:6 mix, m.S. foot rests including fixing in 20 x 20 x 10cm cement conc. blocks neatly finished, complete as per standard design and approved drawings.Chamber cover of FRP Capable of taking 2 wheeler / light vehical load (5Rmt).Price shall include the cost of excavation, back filling, disposal of suplus earth dewatering & water proofing of manholes as directed at site & other associated civil works. (As per makeList)

Constructing water tight brick masonry Inspection sewer chamber with Inside size 900mm x 800mm from 0.6 to 0.9m deep with first class bricks in cement mortar 1:6 (1cement :6 coarse sand), R.C.C. top slab with 1:2:4 mix (1cement :2coarse sand :4 graded stone aggregate 20mm nominal size). Foundation concrete 150mm thick 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement plaster 1:3 (1cement :3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:3:6 mix, m.S. foot rests including fixing in 20 x 20 x 10cm cement conc. blocks neatly finished, complete as per standard design and approved drawings.Chamber cover of FRP Capable of taking 2 wheeler / light vehical load (5Rmt).Price shall include the cost of excavation, back filling, disposal of suplus earth dewatering & water proofing of manholes as directed at site & other associated civil works. (As per makeList)

Constructing water tight brick masonry Inspection sewer chamber with Inside size 900mm Dia from 0.9 to 1.65m deep with first class bricks in cement mortar 1:6 (1cement :6 coarse sand), R.C.C. top slab with 1:2:4 mix (1cement :2coarse sand :4 graded stone aggregate 20mm nominal size). Foundation concrete 150mm thick 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement plaster 1:3 (1cement :3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:3:6 mix, m.S. foot rests including fixing in 20 x 20 x 10cm cement conc. blocks neatly finished, complete as per standard design and approved drawings. Chamber cover of FRP Capable of taking fire engine movement load (40Rmt)(Price shall include the cost of excavation, back filling, disposal of suplus earth dewatering & water proofing of manholes as directed at site & other associated civil works). (As per makeList)

Supply, Unloading, Storing, Safe keeping, shifting, installing, testing & commissioning of 160mm dia Anti Rodent Double Walled Corrugated Pipe (PE/PP) for storm water drain pipe installation confirming to IS: 16098, Stiffnes SN4, cut to required lengths including coupler, Tee, Bend to correct levels below ground in trenches upto required depth including excavation in all kind of soil including (hard Rock) dewatering, refilling,watering, ramming and removing the surplus excavated material and making good the same complete as required for sewage drain. making proper connection with coupler joint of required depth as per manufacturer. Cutting, chases / holes in walls / slab to the satisfaction of the project manager / consultants and making good the same after pipes have been duly laid and testing complete for sew age. (As per makeList)

Supply, Unloading, Storing, Safe keeping, shifting, installing, testing & commissioning of 200mm dia Anti Rodent Double Walled Corrugated Pipe (PE/PP) for storm water drain pipe installation confirming to IS: 16098, Stiffnes SN4, cut to required lengths including coupler, Tee, Bend to correct levels below ground in trenches upto required depth including excavation in all kind of soil including (hard Rock) dewatering, refilling,watering, ramming and removing the surplus excavated material and making good the same complete as required for sewage drain. making proper connection with coupler joint of required depth as per manufacturer. Cutting, chases / holes in walls / slab to the satisfaction of the project manager / consultants and making good the same after pipes have been duly laid and testing complete. (As per makeList)

Supply, Unloading, Storing, Safe keeping, shifting, installing, testing & commissioning off in position 100mm dia gully trap in brick masonry chamber of 300mm x 300mm including embedding the gully trap in cement concrete 1:2:4, (1:6) plastering, curing, effecting necessary connections and providing bitumastic painted special Chamber cover of THERmODRAIN FRP Capable of taking 2 wheeler / light vehical load (5Rmt). (As per makeList)

Supply Installation, testing & commissioning Variable Speed Hydro-pneumatic System for domestic & water supply : Compact self contained Hydro-booster system comprising of following : Vertical multistage centrifugal pumps with SS-304 casing, S.S 304 impeller and SS AISI 410 shaft, C.I. Base CED coating & head TEFC motor IE5 with standalone VFD on Nos. pump(with mechanical seal) Vendor to submit performance curves and technical catalogue of the proposed model for review and information. Panel mounted microprocessor multi pump contoller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a single body or as separate components with pressure sensor transmitter (one dedicated to Nos. pump), diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following mODBUS-RTU or BACNET Class-2 protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be 200 liters (approx.) or as per manufacturer recommendation). 200 Ltrs HPN tank 10 Bar rating for domestic & flushing Set of accessories such as G.I headers for suction and discharge, control valves, non return valves, pressure switches, pressure transducers, pressure gauge, inter connecting power and control cabling etc. complete. (As per makeList) For Domestic water supply,Capacity per pump - 9 Cum/hour, Head - 30 Rmtrs, Location - Terrace level, 1 Set = 1W(cascade operation)+1SB,Suction head -Positive

Supplying, erecting, testing and commissioning of minimum three & above star rated submersible pump set for open well of 3.75 kW/5 HP with 415 V, three phase, 50 Hz, A.C. supply having delivery head from 43 to 21 m and discharge from 120 to 840 lpm & 65 mm suction/50 mm delivery dia. as per specification no. WP-OSP. (As per makeList)

Supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 V, A.C. supply submersible/centrifugal pump set upto 7.5 HP - 10 HP consisting of D.O.L. starter having relay range 28-42 A, S.P.P., combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc. (As per makeList)

Installing underground KESSEL-Grease Separator EasyClean under ground Standard NS 1 550-950 mm, class B (12.5Ton) according to EN1825. Resistant when installed in the groundwater up to 500 mm, A load distribution plate must be provided for class B,Consisting of:Upper section made of polymer, infinite height and level adjustment,with cover class B in accordance with EN 124 made of cast iron, sealed odour-tight, incl. lift-out key Inlet/Outlet: 110 mm Sludge trap capacity: 140 lTotal separator capacity: 230 l,Fat storage: 70 l,Certification: Z-54.1-440,Weight: 111 Kg,Dimension: 1380 x 1106 mm

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV. (As per makeList)

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessary accessories complete as per specification no. FF-FFA/HV (As per makeList)

13-8-1 Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL (As per makeList)

Supplying and erecting m.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003). (As per makeList)

Supplying and erecting m.S./CRCA cabinet for housing double hose pipe with nozzle (size 750 x 600x 250 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (As per makeList)

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF- FFA/NZ. (As per makeList)

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC. (As per makeList)

Supply ,Installation,testing and commissioning of 4 Way Fire Brigade Connection for gun metal SS fire brigade connection consisting of 4 Nos. 63 mm dia instantaneous type male couplings, with built in check valves and 150 mm dia. flanged outlet connection with butterfly and check valves (Market Rate). (As per makeList)

Supply ,Installation,testing and commissioning of Draw Out Connection for S.S. draw out connection (suction collecting head) consisting of 2 Nos. 63 mm dia instantaneous type male couplings, with built in check valves and 150 mm dia. flanged outlet connection. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary ,fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP. (As per makeList)

Providing coating of bitumen paint & pipeline corrosion resistant Pypkote tape conforming to IS 10221 Appendix B specification having 4mm thick wrapping for underground 100 mm ring main of fire fighting system. (Pypkote tape comprises of a Tar based Polymeric mix supported on a fabric of high tensile strength Fibreglass). (As per makeList)

Supplying, erecting, testing and commissioning of Pendent quartzoid bulb sprinkler, 15 mm (½") dia. NBCm Body chrome finished, 68º C fixed temperature rating with deflector disc . (As per makeList)

Supplying, erecting, testing and commissioning of Uprightt quartzoid bulb sprinkler, 15 mm (½") dia. NBCm Body chrome finished, 68º C fixed temperature rating with deflector disc . (As per makeList)

Supplying, erecting, testing and commissioning of Pendent quartzoid bulb sprinkler (SPK P BRASS 1 74 ESFR 25), K-factor- 25.2 gpm/psi½, thread Size 1 in. NPT, 74º C fixed temperature rating. (As per makeList)

Supplying, erecting, testing and commissioning of concealed quartzoid bulb sprinkler, 15 mm (½") dia quartzoid bulb. NBCm Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/CON. (As per makeList)

Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP. (As per makeList)

Scraping and painting of the entire sprinkler piping with 2 coat of primer and 2 coats of enamel paint. (As per makeList)

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF- VL/BFV. (As per makeList)

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV. (As per makeList)

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV. (As per makeList)

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV. (As per makeList)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV. (As per makeList)

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 Kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG. (As per makeList)

Supplying and erecting 25 mm Ball Valve complete with PN16 pressure rating, as per specification no. FF-VL/BV. (As per makeList)

Supplying, erecting, testing and commissioning vane type water flow detector 75/80 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes. as per specification no. FF- SPR/WFD. (As per makeList)

Supplying and erecting, testing and commissioning of 150 mm dia. installation control valve(Alarm Valve) of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch,cock valve complete with drain valve and bypass, test control box, ball valves, mS pipes of required size, flanges, orifice plate, gasket etc. complete as per specification no. FF-VL/ICV. (As per makeList)

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 Kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. m. S. flat with nut & bolts routed in wall complete.(As per makeList)

Supply, Installation, Testing & Commissioning of ISI marked portable fire extinguisher of ABC type (gas pressure) 6Kg capacity as per IS:13849 complete in all respects including initial fill.(Market Rate). (As per makeList)

Supply, Installation , testing, commissioning and handing over of Sand Buckets as per Tender Specifications. 16mm round bar and 25x25d steel angles of 3mm thickness to be considered. (Two Sand Buckets to be kept along with stand ) (Market Rate). (As per makeList)

Supply, Installation of 6 ltr. Fire Extinguisher K Class Kitchen Wet chemical SS BODY (Blend of Potassium Acetate, Potassium citrate or Potassium carbonate), Applicable fire class K type fire Extinguisher Kichen, at all places involving use of cooking fats and oils at high temperatures Like Canteen, Hotels, Restaurants, Food Courts, all small and big kitchen.confoming to Standard code IS:15683:2018. (As per makeList)

Laisoning for obtaining Fire NOC from Fire Department

Supplying and erecting LED square / circular max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED square / circular max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED square / circular max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED square / circular max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED Panel Light (600mm X 600mm) max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supply of 20 W LED batten WH PVC (5700K to 6000K) CRl>70% Lumen efficacy> 100 Lumen per Supplying and erecting GLS Lamp.20-40W

Supplying and erecting LED Strip light max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying LED concealed type foot / step light with aluminium body for indoor / outdoor application suitable for 4W - 6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying and erecting anodized aluminium light LED fitting (4 feet) max.22W with high transitivity diffuser with system lumens output of min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block/wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting Surface mounted Cylindrical downlight 20watt

Supplying and erecting Track light 12watt

Supplying and erecting Track 2 Rmts

making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the bacKground to match the original surface upto 20W.

making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600mm/1200x300mm and finishing the bacKground to match the original ceiling surface.

Supplying, erecting, testing & commisioning 150 kVAr, 3 phase, 50 Hz., APFC Panel with derated power contactor of suitable rating for capacitor switching Application for Nos. step controlled by microprocessor based APFC relay consisting of 2,3,5,5,10,10,15,20,30,50 with mPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with detuned aluminium wound reactor of 7/ 14% for Nos. step, APFC Panel shall suitable rating mCCB as incomer and Nos. branch/step shall have separate isolation with mCCB/mCB of Suitable rating for protection, compliance to IEC 61439 and power quality IEC 61921 standard as per specification no. CP- ED/APFC.

Supplying, installing, testing and commissioning air circuit breaker Electrical drawout type, 650V, 1000A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close indication, individual fault trip indication, indications for alarm and trip, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-ACB

Providing & erecting 3 Pole mCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. mCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-mCCB

Providing & erecting 3 Pole mCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. mCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-mCCB

Providing & erecting 3 Pole mCCB 415V, 320A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. mCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-mCCB

Providing & erecting 3 Pole mCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. mCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-mCCB

Providing & erecting 3 Pole mCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. mCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-mCCB

Providing & erecting 3 Pole mCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. mCCB with phase barriers on both sides, insulation withstand capacity 800V, no line- load bias in provided enclosure/panel as per specification no. SW-mCCB

Providing & erecting 3 Pole mCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. mCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-mCCB

Supplying, erecting & marking SPmCB 0.5A to 5A, C-series with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification Nos.W-mCB

Supplying, erecting & marking SP mCB 6A to 32A, C-series with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification Nos.W-mCB

Supplying, erecting & marking DP mCB 6A to 32A, C-series with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification Nos.W-mCB

Supplying, erecting & marking DP mCB 40A to 63A, C-series with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-mCB

Supplying, erecting & marking TP mCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification Nos.W-mCB

Supplying, erecting & marking TP mCB 40A to 63A, with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification Nos.W-mCB

Supplying, erecting & marking FP mCB 6A to 32A, with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification Nos.W-mCB

Supplying, erecting & marking FP mCB 40A to 63A, with rated short - circuitBbreaking capacity (Icn) 10kA in provided distribution board as per specification Nos.W-mCB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 4 pole RCCB 80A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 4 pole RCCB 100A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, fixing and commissioning 2 pole RCBO up to 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCBO.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TPmCBs total 8 ways/24 Poles, with door, 1.2mm thickness surface/flush mounted, IP43 Protection on provided iron/GI frame (vertical busbar type) as per specification Nos.W-mCBDB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TPmCBs total 12 ways/36 Poles, with door, 1.2mm thickness surface/flush mounted, IP43 Protection on provided iron/GI frame (vertical busbar type) as per specification Nos.W-mCBDB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPmCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-mCBDB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPmCB of 8 ways/phase (24 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-mCBDB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPmCB of 12 ways/phase (36 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-mCBDB.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2ways for incoming and 6 ways (6 poles) for outgoing SP mCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-mCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2ways for incoming and 10 ways (10 poles) for outgoing SP mCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-mCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole mCCB as incomer & outgoing SP mCB (12 poles) or TP mCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on provided iron/GI frame (vertical busbar type) as per specification no. SW-SWR/mCBDB1

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitablefor DP mCB/TP mCB/FP mCB/RCCB/RCBO complete erected on provided angle iron/GI frame

Supplying and erecting ON LOAD automatic transfer switch 4 pole, 415V, 1000A, 50Hz with enclosure, flexibility of neutral connection, line and load reversibility,changeover with phase barriers, source separator, terminal covers along with staggeredtermination for cable connection and ATS controller with provision of time delayprotection of OV, UV, phase sequence changing, single phasing and event logging,connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 as perspecification no. SW-SWR/ATS.

Supplying and erecting ON LOAD automatic transfer switch 4 pole, 415V, 400A, 50Hz with enclosure, flexibility of neutral connection, line and load reversibility,changeover with phase barriers, source separator, terminal covers along with staggeredtermination for cable connection and ATS controller with provision of time delayprotection of OV, UV, phase sequence changing, single phasing and event logging,connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 as perspecification no. SW-SWR/ATS.

S & E OF cu Link of 16Sqmm with copper lugs for connecting the switchgear to busbar

S & E OF cu Link of 32Sqmm with copper lugs for connecting the switchgear to busbar

S & E OF Busbar connectors with seprator in Nos. pole, mounting on connector strips, 4pole from 16 to 50 Sqmm for connecting the switchgear to the outgoing cable equivalent to connectwell Iron,GI, Sheet

Supplying, erecting, testing & commisioning metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and painted with one coat of red lead paint and 2 coats of enamel paint or powder coating complete as per specification no. CP/SH/CR

Supplying, erecting, testing & commisioning GI sheet 1.25 mm (18 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint as per specification no. CP/SH/CR

Supplying and erecting iron work, sheet metal work consisting of mS sheets, various sections of iron, plates, chequered plates, rods, bars, mS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.

Supplying and erecting aluminium strip of required sizes used for earthing or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint as per specification no EA-EP.

Supplying and erecting copper strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.

Supplying and erecting annealed bare copper earth conductor of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) aluminium cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) aluminium cable, 1100 V 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) aluminium cable, 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) aluminium cable, 1100 V 3½ core 185sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) aluminium cable, 1100 V 3½ core 240sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) aluminium cable, 1100 V 3½ core 300sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) aluminium cable, 1100 V 4 core 25 sq. mm. aluminiumconductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) copper cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) copper cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) copper cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) copper cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) copper cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) copper cable 1100 V, 3½ core 35 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting mains with 3x6 Sqmm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-mA/BW

Supplying and erecting mains with 3x4 Sqmm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-mA/BW

Supplying and erecting mains with 3x2.5 Sqmm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-mA/BW

Supplying and erecting HmS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-mA/CC.

Supplying and laying HmS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-mA/CC.

Supplying and erecting HmS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-mA/CC.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 500 mm width & 100 mm height with required standard accessories.

Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 200 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 300 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 500 mm width & 20 mm height complete with necessary hardware.

making trench in Hard murum/Tar road having 0.75m depth and minimum 0.3m width for laying provided cables up to voltage level 1.1kV cable complete as per specification no. CW-EXN-CTR

Supplying & laying (including excavation) half round reinforced cement concrete pipe of NP-2 class of 250 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWm,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (Without batteries) (0.5hours, 42Ah battery)

Supplying,erecting, testing & commisioning of 20 kVA capacity on line pure sine wave,PWm,IGBT based UPS with 0.9 to unity output pf ,3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS (Without batteries) (0.5hours, 42Ah battery)

Supplying and erecting 12V/42Ah SmF battery with battery terminal wire, duly charged with 24 months warranty complete (For 3kVA UPS)

Supplying and erecting 12V/65Ah SmF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying & erecting Point wiring for light/bell concealed type in min 20 mm HmS PVC conduit with 1.5 Sqmm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW

Supplying & erecting Secondary point wiring for additional light/bell point in min 20mm PVC conduit with 1.5 Sqmm (2+1E) FRLSH grade copper wire with required accessories as per specification no. WG-PW/SW

Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no. WG- PW/CW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting 6 to 32 A, 10kA, SPmCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.

Supplying and erecting 16 to 32A, 10kA, DPmCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected.

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the bacKground.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the bacKground.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the bacKground.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the bacKground.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the bacKground.

Providing & Fixing of printed instruction chart for (with minimum 700 x1000 mm in size) treating persons suffering from electric shock, printed in English & marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV

Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-Dm/PW

Dismantling the existing aluminium/copper mains, sub-mains wiring upto 10 Sqmm. along with accessories etc. complete as per specification no. Dm/PW

Dismantling of existing fluorescent fittings of any type & size.

Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear.

Dismantling the existing electric geyser or storage type water heater of any size along with plumbing connections and making the site clear.

Dismantling the existing switchgears, DB, and bus bar of any size complete with/without board or angle iron frame

making the site clear of dismantled DB and switchgears by refilling the holes with cement mortar & finishing in an approved manner.

Dismantling the existing cables of all types & size up to 10 sq mm.

Dismantling the existing cables of all types & size above 10 sq mm up to 50 Sqmm.

Dismantling the existing cables of all types & size above 50 sq mm.

Dismantling the existing telephone / LAN / WAN / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification no.WG-Dm/PW

Dismantling the existing distribution transformer of any capacity froRmthe plinth / foundation safely without any damages.

Dismantling unserviceable DG set above 50 kVA capacity along with switchgears & panel, etc. and remaking the site good as original.

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz.,630 kVA, mineral oil immersed and naturally cooled outdoor type, Copper wound, without gas cushioning, hermetically Sealed transformer, delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-HSL.

Providing & Fixing of printed instruction chart for (with minimum 700 x1000 mm in size) treating persons suffering from electric shock, printed in English & marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete.

Supplying and fixing standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, antiseptic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness upto 11 kV

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 320 kva output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen Protected alternator with static excitation system running at 1500 RPm as per IS4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 54.89 ltr/hr @75% loading . Both the engine and Alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, Switchgears, indicators connected with suitable wires/cables, the complete set Enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75Db at 1.0 m, provided with first filling of oil, diesel not less than 480 ltr etc., on Provided Sqm0 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of microprocessor based generator control unit (synchronization panel) panel suitable for diesel generating set of 320 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all standard features and safeties etc as per specification no. GEN-SYNC.

S.I.T.C of G+1 - 10 Pass. Passenger Lift with S.S Cabin and S.S. Hairline Finish Automatic Doors Opening lift with Down Collective Operation and Auto Rescue Device (ARD). Unit - 1 Nos. with capacity of 680 Kgs. With No. of pax is 10 Passenger of speed 1 mPS. No of stops / opening IS 2 / 2 (all on the same side). Service Floors included Gr. + 1st Upper Floor. Travel (m) of 3.3 Rmtr approx. Hoistway size per elevator (as per site) and Hoistway layout of 1750mm (W) X 1950mm (D) (REQUIRED) machine room less shaft. machine Location is in the lift shaft. Control is considered microprocessor Based Ac VVVF with Simplex Operation. Pit Depth is 1500 mm (Required at site) with Overhead 4200mm (measured from finished floor level of the top most floor served by the lift to the underside of the machine room floor level) Clear Cabin Internal Size are As Per Gad. Car Height :Finished Car Floor To Underside Of False Ceiling of 2100 mm is considered with Car Door Size, Type, Finish & Car Enclosure: 304 Stainless Steel Hairline Finish Cabin (Back Side Half See Through Glass ) With Pvc Flooring With False Celing, Led Light & Blower. Landing Door Size, Type & Finish On Other Floors 800 mm w x 2000 mm h, center / telescopic opening 304 S. S. Hairline finish door. Aluminium Flooring Landing Sill, PVC flooring and indirect L.E.D Lighting. machine/motor is Gearless Permanent magnet Synchronous. Roping Type ratio 2:1. Drive motor Controller is micro Processor Controller With Vvvf Drive, Ard (Auto Rescue Device) & Overload. Type Of Drive is Ac Variable Voltage Variable FrequencyCar Safety has Flexible Glide Clamp Type. Landing Door Lock is Electro machanical. Emergency Brake Release is provided along side Provision For Emergency Opening Of Landing Door At Nos. Floor. Over Speed is controlled by Over Speed Governor. Safety Buffers In Pit has spring buffer. No. Of Car Operating Panels has One Cop In Car On The Side Wall. Finish Of Face Plate (Cop) is Stainless Steel Hairline Finish & 2mm thick. Button Type micro motion Click Type is as Per Brand Standard as well as False ceiling. Attendant Operation With Key Switch, Fan Control, & Capacity Plate & Emergency Display is provided. Display Unit In The Car has Seven segment/ Dot matrix Display on the cop. Hall Call with stainless steel buttons with stainless steel face plate is provided. Hall Position Indication In main Lobby / Upper Floors also has Seven Segment/ Dot matrix Display On The Cop

Supply & Installation of m. S. Structure Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge.

Supply & Installation of back side toughened glass and balance 2 sides and front in ACP sheets

SITC Motorised lighting bars to be equiped with : 1.Drive unit system with gear box and motor with DC brake. 2.Dirvetor pulley system 3.Pullies 4.Wireropes 5.Requisite foundation frame 6.7 power junction boxes with connectors for lights 7.4 DMX Points on DMX junction box on each lighting bar 8.MCCP +RCP for operation

Stage Lighting Fixtures: Repair & Service of Existing Fixtures. Service and Repairs includes existing 1000W SPOT LIGHT-20NOS., 2000W SOLAR LIGHT 2NOS, PAR CAN - 20NOS., CYCLORAMA - 8NOS.

Supply, Installation, Testing & Commissioning of New Lights: Supply, Installation, Testing & Commissioning of Benz S250T or Equivalent approved make Led Fresnel Spot Light - Warm - 3200K. Benz S250T or Equivalent approved make is a Premium Quality, Well designed & Engineered, Versatile Led Fresnel Spot Ligh. High TLCI & CRI > 9, Beam spread: 10°- 60, Color Temp: 3200K, Dimming: Manual as well as DMX. Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of Benz S150Tor Equivalent approved make Led Fresnel Spot Light - Warm - 3200K. Benz S150T is a Premium Quality, Well designed & Engineered, Versatile Led Fresnel Spot Light. High TLCI & CRI > 95, Beam spread: 10°- 60°, Color Temp: 3200K, Dimming: Manual as well as DMX. Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of LED Profile Spot 300W - 3200K. Colour Temperature - 3200K Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of Benz P250Xor Equivalent approved make Led Soft Panel Light - Color Tuneable from 3200K -5600K. Benz P250X is a Premium Quality, Well designed & Engineered, Perfectly Diffused, Versatile Led Soft Panel Light. ● High TLCI & CRI > 95 ● Beam spread: 120° ● Color Temp: 3200k to 5600K ● Dimming: Manual as well as DMX. Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of 1000W , 3200K T1 or Equivalent approved make - Halogen Fresnel Spot Light. Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of 1000W , 3200K PARCAN - Halogen Fresnel Spot Light. Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of 3W x 54 RGBW LED PAR, Voltage: AC220V, Channel: 8CH. Function: DMX 512 control, Lamp: 3W x 54 Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of Voltage: AC220V; 250W, RGBW, 3000K-600K,Moving Head Light Specifcation as approved by engn.incharge

Supply, Installation, Testing & Commissioning of Voltage: AC220V;1500W Fog / Smoke/HAZE Machine with Liquid

SITC of AlumInium C Clamp for all lighting fixtures

SITC of Safety Bond of gi wire rope & dog hook

Supply, Installation, Testing & Commissioning of DMX Lighting Console 96 Channel. Brand: Lite-Puter. Product Code: CX12.

Supply, Installation, Testing & Commissioning of 8 Ch. DmX splitter with, 8 Isolated outputs, Mounting brackets for grid mount.

SITC of DMX Signal Junction Box fitted with 3 pin panel mount female connectors, necessary gland and mounting brackets.

SITC of DmX Loop Signal Junction Box fitted with 3 pin panel mount female connectors, necessary gland and mounting brackets.

SITC of DmX Male Connectors 3 Pin having rubber sheeth protection for Cross connecting DmX wiring connections.

SITC of DmX Female Connector 3 Pin soldered with required capacity of resistor for signal deframing.

Supply, Installation, Testing & Commissioning of DMX Signal Cable 2core shilded cable imp-110 to 120 ohm for DMX Network. Specifcation as approved by engn.incharge

Suppy, Installation, Testing and Commissioning of Biamp or equivalent IV6-1122/05B 12-inch two-way, 120 x 05 (Indoor, Black) Flown Line Array with minimum of LF 1 x 12” ferrite driver, 3” Voice coil, weather resistant cone, HF 2 x 1.75” Neodymium compression drivers or better. minimum of 1600 Watts @ 16 ohms Peak or better. Frequency response of 40Hz – 18.5KHz or better. Nominal sensitivity 1W/1m 107 dB or better. maximum SPL peak 145dB, continuous 139 dB or better. Array should be capable of covering 120 x 05 dispersion. Array should be capable of passive acoustic optimization if not should quote Nos. box with separate amplification channels.

Suppy, Installation, Testing and Commissioning of Biamp or equivalent IV6-1122/15B 12-inch two-way, 120 x 15 (Indoor, Black) Flown Line Array with minimum of LF 1 x 12” ferrite driver, 3” Voice coil, weather resistant cone, HF 2 x 1.75” Neodymium compression drivers or better. minimum of 1600 Watts @ 16 ohms Peak or better. Frequency response of 40Hz – 18.5KHz or better. Nominal sensitivity 1W/1m 107 dB or better. maximum SPL peak 145dB, continuous 139 dB or better. Array should be capable of covering 120 x 15 dispersion. Array should be capable of passive acoustic optimization if not should quote Nos. box with separate amplification channels.

Supply of Rigging hardware to suspend the line array and to move the line array up & down for maintenance purpose

Suppy, Installation, Testing and Commissioning of Splay Bracket for Biamp or equivalent IV6-S1 Splay bracket pair Type 1 (Black) Flown Line array speakers manufactured by quoted Line array Speaker OEm Approved brands : Biamp/D&B audiotechnik/L-Acoutics

Suppy, Installation, Testing and Commissioning of Splay Bracket for Flown Line array speakers manufactured by quoted Line array Speaker OEm Approved brands : Biamp/D&B or equivalent audiotechnik/L-Acoutics Biamp or equivalent IV6-S3 Splay bracket pair Type 3 (Black)

Suppy, Installation, Testing and Commissioning of Flying array frame with Biamp or equivalent IV6-GP-AF 20:1 safety factor manufactured by quoted Line array Speaker OEm

Suppy, Installation, Testing and Commissioning of Biamp or equivalent PY1-EN750-1550 Lift point for array frames manufactured by quoted Line array Speaker OEm

Suppy, Installation, Testing and Commissioning of IS6-218W Ground stacked subwoofer with minimum of 2 x 18” with 4” Voice coils or better. minimum of Continuous power handling of 1400 watts or better, Peak power of 5600 Watts or better. Nominal sensitivity of 107dB or better. maximum SPL Peak at 144dB or better. SPL continuous of 138dB or better. Frequency response of 32Hz to 145Hz or better.

Suppy, Installation, Testing and Commissioning of Two way full range loudspeaker of LF 2 x 8” , HF 1 x 1” or better. Operation range ( -10dB ) – 60Hz to 18 KHz or better. Dispersion of 90 x 70 or better. Sensitivity of 94dB(1W/1m). maximum SPL of 125 dB SPL Peak or better. Nominal Peak Power Handling – 1500W or better. Loudspeaker shall include all the required accessories to mount the speakers. V2-28B

Suppy, Installation, Testing and Commissioning of Two way full range loudspeaker of LF 2 x 8” , HF 1 x 1” or better. Operation range ( -10dB ) – 60Hz to 18 KHz or better. Dispersion of 90 x 70 or better. Sensitivity of 94dB(1W/1m). maximum SPL of 125 dB SPL Peak or better. Nominal Peak Power Handling – 1500W or better. Loudspeaker shall include all the required accessories to mount the speakers. V2-28B

Suppy, Installation, Testing and Commissioning of Passive stage monitor with two-way, full range coaxial loudspeaker. Frequency response of minimum 70Hz – 18Khz or better. Peak Power Handling of 800 Watts program. Sensitivity of 99dB SPL (1W/1m). Nominal Impedance: 8 ohms or better. maximum SPL of 128 dB SPL or better. Driver size of LF x 1, 10” or better and HF x 1, 1.25” or better. Biamp mX10-B

Suppy, Installation, Testing and Commissioning of Two way full range loudspeaker of LF 2 x 6.5” , HF 1 x 1” or better. Operation range ( -10dB ) – 70Hz to 18 KHz or better. Dispersion of 90 x 70 or better. Sensitivity of 92dB(1W/1m). maximum SPL of 121 dB SPL Peak or better. Nominal Peak Power Handling – 1000W or better. Loudspeaker shall include all the required accessories to mount the speakers. V2-26W

Suppy, Installation, Testing and Commissioning of Digital Amplification for Line array. The Digital Amplifier shall provide two channels of power amplification and digital signal processing with 2 x analog and 2 x Dante inputs or any network protocol to communicate with DSP and mixer. The amplifier shall include a switch mode power supply with power factor correction, smart rail management and bridgeable switch mode fixed frequency Class D output circuit topology. The amplifier shall deliver a maximum output power per channel of; 1250W at 8Ω; 2400W at 4Ω; 3200W at 2Ω; 4800W at 8Ω bridged; 6400W at 4Ω bridged. Amplifier quantity shall be quoted for functionality to manipulate the passive acoustic optimization for Nos. loudspeaker either passively directly on loudspeaker or individually by Nos. loudspeaker of Nos. amplification channel. Biamp ALC-3202D

Suppy, Installation, Testing and Commissioning of Networked digital Amplification for Line array. The Digital Amplifier shall provide four channels of power amplification and digital signal processing with 4 x analog and 4 x Dante inputs or any network protocol to communicate with DSP and mixer. The amplifier shall include a switch mode power supply with power factor correction, smart rail management and bridgeable switch mode fixed frequency Class D output circuit topology. The amplifier shall deliver a maximum output power per channel of; 1250W at 8Ω; 1400W at 4Ω; 1600W at 2Ω; 2800W at 8Ω bridged; 3200W at 4Ω bridged. Amplifier quantity shall be quoted to fulfil the functionality of manipulating the passive acoustic optimization for Nos. loudspeaker either passively i.e. directly on loudspeaker or individually by Nos. loudspeaker of Nos. amplification channel. Biamp ALC-1604D

Suppy, Installation, Testing and Commissioning of Networked digital Amplification for Line array. The Digital Amplifier shall provide Four channels of power amplification and digital signal processing with 4 x analog and 4 x Dante inputs or any network protocol to communicate with DSP and mixer. The amplifier shall include a switch mode power supply with power factor correction, smart rail management and bridgeable switch mode fixed frequency Class D output circuit topology. The amplifier shall deliver a maximum output power per channel of; 400W at 8Ω; 400W at 4Ω; 400W at 2Ω; 800W at 8Ω bridged; 800W at 4Ω bridged. Amplifier quantity shall be quoted to fulfil the functionality of manipulating the passive acoustic optimization for Nos. loudspeaker either passively i.e. directly on loudspeaker or individually by Nos. loudspeaker of Nos. amplification channel. Biamp ALC-404D

Suppy, Installation, Testing and Commissioning of passive wall mount speaker with 6.5" LF Coated paper cone and 1" High-frequency Soft dome, the operating range should be 65Hz to 20kHz, and the speaker's nominal bandwidth should be 100deg x 50deg. The continuous power handling should be 150W (RmS) @8ohm & 600W (Peak). The speaker's nominal maximum SPL @1m 117db (Peak) & 111db (continuous). The speaker should come with a click mount type of mounting bracket & safety cable & Integrated spirit level for fast, hassle-free positioning and mounting. The speakers should come with Loudspeaker overload protection for 24/7 failsafe operation The speakers should be IP64-rated. Biamp mASK6CT-BL

Suppy, Installation, Testing and Commissioning of passive wall mount speaker with 6.5" LF Coated paper cone and 1" High-frequency Soft dome, the operating range should be 65Hz to 20kHz, and the speaker's nominal bandwidth should be 100deg x 50deg. The continuous power handling should be 150W (RmS) @8ohm & 600W (Peak). The speaker's nominal maximum SPL @1m 117db (Peak) & 111db (continuous). The speaker should come with a click mount type of mounting bracket & safety cable & Integrated spirit level for fast, hassle-free positioning and mounting. The speakers should come with Loudspeaker overload protection for 24/7 failsafe operation The speakers should be IP64-rated. Biamp mASK6CT-BL or equivalent

Suppy, Installation, Testing and Commissioning of 4 Channel class D amplifier 4 x 120 Watts (70/100 Volts or RmS @ 4 Ohms) or in bridge mode 2 x 240 Watts (70/100 Volts or RmS @ 8 Ohms), combined convection and fan cooling, 2 U, 19" rackmount Biamp REVAmP4120T or equivalent

Suppy, Installation, Testing and Commissioning of 100 volt, 120 watts volume control, with 24V prioirty relay Biamp E-VOL120 or equivalent

The fixed I/O DSP shall support Dante™ digital audio networking that shall allow up to 32 x 32 channels. The Dante networking connection shall be implemented on a RJ-45 connector. The fixed I/O DSP shall be interoperable in accordance with the AES67 standard. The fixed I/O DSP shall support Ethernet connection for programming and control on a RJ-45 connector. The fixed I/O DSP shall have internal DSP processing. The fixed I/O DSP shall include 4 channels of General Purpose Input and Output connection (GPIO) for sending or receiving logic signals. The programming of the GPIO ports shall be software configurable. The fixed I/O DSP shall include a RS-232 connection for control data transmission into or out of the fixed I/O DSP and such operation shall be software programmable. The fixed I/O DSP shall include a Universal Serial Bus (USB) connection on a standard USB-B type connector. The fixed I/O DSP shall be software configurable to stream up to 8 channels of digital USB Class 1 Audio transmission either into or out of the fixed I/O DSP or simultaneous input and output. The fixed I/O DSP shall support port authentication via IEEE 802.1X. TesiraFORTÉ DAN CI or equivalent

Suppy, Installation, Testing and Commissioning of 48 Channel Digital mixer with 33 motor faders (32 channels + 1 master), 48 input mixing channels (40 mono + 2 stereo + 2 return), 20 Aux (8 mono + 6 stereo) + Stereo + Sub buses 8 DCA groups with Roll-out, 32 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs, 16 analog XLR outputs, 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device, 8 Effects and 10 GEQ 1 expansion slot for NY64-D audio interface card. Yamaha TF5 or equivalent

Suppy, Installation, Testing and Commissioning of Dante Expansion Card for Digital mixing Consoles Yamaha NY64-D or equivalent

Suppy, Installation, Testing and Commissioning of Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs. Yamaha Tio1608-D or equivalent

Suppy, Installation, Testing and Commissioning of 40x1G PoE+ 960W and 8 x SFP+ managed Switch for Dante & AVB. Netgear or equivalent

Suppy, Installation, Testing and Commissioning of Netgear SFP + DAC Cable (AXC763) 3m Passive SFP + Direct Attach Cable or equivalent

Suppy, Installation, Testing and Commissioning of LAV mIC, CARDIOID with RmtQG connectors. UL4B/C-RmtQG-A or equivalent

Suppy, Installation, Testing and Commissioning of EARSET mIC, OmNI with TQG connectors. mX153T/O-TQG or equivalent

Suppy, Installation, Testing and Commissioning of Interchangeable HANDHELD mIC. SLXD2/Sm58 or equivalent

Suppy, Installation, Testing and Commissioning of Dual Channel Reciever with Transparent 24-bit digital audio, Extended 20 Hz to 20 kHz frequency range (microphone dependent), 118 dB dynamic range, Digital predictive switching diversity, 44 mHz tuning bandwidth (region dependent), 32 available channels per frequency band (region dependent) Up to 10 compatible systems per 6mHz TV band; 12 systems per 8 mHz band, Easy pairing of transmitters and receivers over IR scan and sync Up to 8 hours from 2 AA batteries or rechargeable battery, Interchangeable microphone capsules. SLXD4DIN or equivalent

UA844+SWB-IN Suppy, Installation, Testing and Commissioning of ANTENNA/POWER DISTRIBUTION SYSTEm. or equivalent

UA8100 Suppy, Installation, Testing and Commissioning of 100' UHF Coaxial Antenna Cable. or equivalent

UA874WB Suppy, Installation, Testing and Commissioning of ACTIVE DIRECTIONAL ANTENNA 470-900mHZ. or equivalent

Sm57-LC-X Suppy, Installation, Testing and Commissioning of Instrument microphone. or equivalent

Sm58-LC Suppy, Installation, Testing and Commissioning of Vocal microphone. or equivalent

DmK57-52-X Suppy, Installation, Testing and Commissioning of Drum microphone set.or equivalent

mX418D/C Suppy, Installation, Testing and Commissioning of 18" Gooseneck microphone or equivalent

Custom Suppy, Installation, Testing and Commissioning of Audio Cable

Custom Suppy, Installation, Testing and Commissioning of Speaker Cable

Custom Suppy, Installation, Testing and Commissioning of LAN Cable

Custom Suppy, Installation, Testing and Commissioning of Antenna Cable

Custom Suppy, Installation, Testing and Commissioning of 8 Channel Snake Cable

Custom Suppy, Installation, Testing and Commissioning of 48U AV Rack with accessories

Custom Suppy, Installation, Testing and Commissioning of Cables & Connectors

AVSI Installation,Testing, Commissioning, configuration, Designing, Documentation, drawings,Training & Programming of above Device

Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall have single/twin bi-colour LED for 360 deg viewing. The detector is conforming to IS 2189: 2008, 11360_1985_Reff2020_EN 54 /VdS / UL & Fm approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FF- AFAS/SD.

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise Cum fixed temperature thermistor complete with 0°C to 58°C temperature range, with base as required, single/twin LED’s with 360 degree view, in-built locking mechanism to check the removal and pilferage of the detector, Detector Shall conforming to IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 / EN 54 / VdS / UL & Fm approved with 3 FF-AFAS/HD - ROR.

Supplying, installing, testing and commissioning of Addressable multisensor/multicriteria Photo Thermal (Smoke + Heat) Detector. The detector shall have twin bi-colour LED for 360 deg viewing. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. This item is referred for Non-conditioning Area conforming to EN 54/VdS / UL & Fm approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition.

Supplying, erecting testing and commissioning beam smoke detector four wire single ended reflected type with 8 " receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 100 meters.

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories, module shall conform to EN 54/VdS / UL & Fm approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/mCP.

Supplying, installing, testing and commissioning of Addressable Sounder Cum Strobe rated at minimum 75 dB @ 3m for Audible annunciation and minimum 75cd flashing at 1 Hz for visual indication. module shall conforming to IS 2189:2008, IS 15908:2021 / EN 54/VdS / UL & Fm approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/ S-ST

Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 Sqmm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of addressable fire control/relay module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs etc., module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 reed relays / EN 54/VdS / UL & Fm approved with 3 years equipment replacement warranty, as per specification no FF- AFAS/CRm-FCm

Supplying, installing, testing and commissioning of addressable fire monitor module for flow switches, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device complete as required. module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 Reed relays, EN 54/VdS / UL & Fm approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/mm

Supplying, installing, testing and commissioning of addressable fire isolator module for isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with Nos. detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. module complete as required. module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982, , EN 54/VdS / UL & Fm approved with 3 years equipment replacement warranty, FF-AFAS/ISm

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting not less than 250 devices and detectors per loop, with on-board LCD alphanumeric backlit display suitable for minimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minutes in alarm condition, The panel shall have suitable provision for network connectivity & compatible for third party integration(Open Protocol to communicate) via a mODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/Fm & UL 864(10th edition) with 3 years replacement warranty and inclusive of lifetime software license validity , as per specification noFF-AFAS/CP.

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, minimum 10" LCD or LED display with resistive touch screen or function keys and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels or on-board LCD alphanumeric backlit display suitable up to 640 characters with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel shall conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/Fm & UL with 3 years replacement warranty FF- AFAS/RP. (Compatible with modular FAS panel from 4 loop upto 10 Loop Fire Alarm Control Panel), as per specification no FF-AFAS/RP\

Supplying,installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RmS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification no. PA-FmCS

Supplying Installing, testing and commissioning of PA Gooseneck microphone with Base and frequency response 50-16000Hz, 150Ω to 200Ω impedence sensitivity 3 to 5.5mV/PA with minimum length(excluding pedestal) of 585mm(23") long, felxible stem gooseneck condenser microphone & Heavy Duty metal Base having on/off switch, LED indication and Suitable for 48V phantom supply as per specification no. PA-Gm

Supplying, erecting, testing & commissioning mixer Amplifier 120W RmS Power with Built-in mP3 player with remote control for USB, SD/mmC card reader, with min 5 mic & 2 Aux Input, bluetooth facility, frequency response 50-15,000Hz ±3dB, Signal to noise ratio between 60dB to 65dB min 5 LED array for output level monitoring. It Shall have Line Output to connect a Booster Amplifier and Preamplifier Output. The Amplifier shall have Speaker Outputs - 4Ω, 8Ω, (Low Impedence) and 70V & 100V/(High Impedence), and can operate on 220-240V Power Supply & DC : 12V (facility to instant transfer to DC power if AC power fails) complete as per specification no. PA-mA

Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 2.5 Sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR

Supplying, erecting, testing and commissioning of 2 core 2.5 Sqmm copper conductor shielded microphone cable complete as per specification no. PA- SmC

Supplying & erecting of High definition 4/5 megapixel IP IR Bullet Camera with following features Image Sensor: minimum 1/2.8" Progressive Scan CmOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR: minimum 120 dB Wide Dynamic Range, ONVIF profile 'contormant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 98°, vertical FOV 72°, diagonal FOV 131° 4 mm, horizontal FOV 80°, vertical FOV 58°, diagonal FOV 104° 6 mm, horizontal FOV 51°, vertical FOV 37°, diagonal FOV 66° Lux sensitivity - minimum 0.003 Lux at color, at Black & White, O Lux (IR) Night Vision Distance minimum IR - 50m: Camera minimum Adjustment Angles - Pan : 360°, Tilt: 90°, Rotate : 360°. Power Supply: Support 12VDC & PoE, IP67. Built in micro SD/SDHC/SDXC card slot of upto 256 GB, Built in microphone. minimum Input/Output - Audio in x 1, Audio Out x 1, Alarm in x 1, Alarm Out x 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto /Color/Black & White, 30 Digital Noise Reduction, White Balance, Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy masking, motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C )

Suppy, Installation, Testing and Commissioning of 4mP IP DOmE CAmERA, 1/3" CmOS image sensor, Output 4mP (2560 x 1440)@25/30fps, max, H.265 codec high comprassion ration, Built-in IR LED, max IR distance 30m,H.264 mJEPG,WDR-120db, SD card slot, Support max 256GB micro sd card, IP^& protection, Streams capacity 2, protection IP67,CE,ROHS

Supplying, installing, testing & commissioning of 32/40 Ch. Network Video Recorder (NVR), suitable connect min. 32 IP Cameras, up to 5 megapixel Resolution, with HDmI/VGA outputs, provided HDmI output of 4K resolution or VGA output with output up to 1920 × 1080. Support H.265 or higher, H.264, mJPEG, Incoming Bandwidth 250mbps with minimum 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of Nos. HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/1000 mbps self- adaptive Ethernet interface, ONVIF conformance, multiple network monitoring: Web viewer. support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SRmtP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specification no. CCTV-NVR

Supplying, fixing, and configuring 24-port 10/100m un-managed 10/100/1000 base-T gigabit switch compliant with IEEE 802.3 standards as per specification complete.

Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 mB/Sec to 213 mB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (mB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, RmtBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD

Supplying and installing LSZH sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC

Supplying & erecting 32" professional LED monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features Brightness: minimum 250 Cd/Sqm Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDmI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-mON

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x550x347 mm) as per specification no. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x550x480mm) as per specification no. WG-NAS/RAK

Supplying and erecting modular type computer Jack RJ 45 with safety shutter, on provided plate and box with wiring connections complete. (DATA/VOICE/WIFI)

Supplying, erecting & terminating 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW

Supplying, erecting & terminating 5 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW

Supplying, erecting & commissioning mDF Box 50x50 pairs made from min. 1.5mm thick mS sheet as per specification no. WG-TA

Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA

Supplying, erecting & commissioning 50 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA

Supplying, installing, testing & commissioning analogue type EPABX of 3 x 8 extension complete with CLI and voice DISA (Direct inward station access) expandable upto 32 extension as per specification no. WG-TA.

Plant manager complete with capability to start stop, modulate, monitor, Schedule, chillers as per design requirements.The expected IO Summary of the same is enclosed for ready reference. Vendor to submit details of Plant manager. Control cabling for the same is covered elsewhere in the tender.

Installation of water cooled chillers including unloading, lifting & positioning of following packages at designated area including installation of spring isolators supplied by OEm as instructed by project manager including lifting, shifting insurance from factory to final location at site. 2 Nos. chillers (160 TR water cooled chiller package)

Variable Speed (VFD) Heat exchanger Pumps (1 Working + 1 Standby ) Flow rate = 400 USGPm Pump Head = 65 ft of water

Supply, installation, testing and commissioning of an insulated roof mounted Chilled water Expansion Tank, 6 mm thick mS plate construction. The tank shall be sized 1000 mm x 1000 mm x 1000 mm high complete with necessary connection for piping and vent. Insulation shall be nitrile rubber covered with 24 G Aluminium cladding and water proofing.

Supply & Installation testing & commissioning of dosing pot suitable to connect 150dia. 15 ltr capacity

Supply, Installation, testing & commissioning of Pressurisation pumps (1 working + 1 standby), 5GPm water flow rate, I HP motor of IE-3 class efficiency, relief valve, pressure gauge, control panel, pressure switch drain, pipes fittings valves etc. Pump should be sized to create required pressure in the system and complete with check valve, Y strainer, butterfly valves, flexible connections rubber pads etc. Provide pump panel with starters,power cables, electric alternator and controls for auto operation from pressure switch.Provide pressure switch. Panel to be IP 55

Supply, installation of insulated pressure type close expansion tank of adequate size complete with integral heavy duty butyl rubber diaphragm, system pressure 125 psig and temperature difference 10 def F. 500 ltr capacity. 32 mm thick nitrile rubber pvc/silver clad.

Supply & Installation testing & commissioning of a common air separator on the return water line located at the pump suction and suitable separator on the return water line located at the pump suction and suitable for 400 US GPm water flow, 250 dia inlet, outlet. The separator should be complete with high capacity air vent, service valve, non return valve, butterfly valve connection for makeup water inlet, flanges etc. 25 mm thick nitrile rubber insulation pvc/silver clad.

Supply, installation, testing and commissioning of single cell cooling, induced draft with counter flow tower complete with fans. motors shall be inclusive of VFD and have IE-3 class efficiency. Efficiency requirement = min 38.2 GPm/HP Design data: City - mumbai Water out - 31 deg.C (87.8 deg.F) Water in - 36 deg.C (96.8 deg.F) For Chiller of 160 TR/ 400 gpm Transportation, Handling etc

Receiving at site above equipment, unloading, storing, security, rigging , lifting shifting, positioning of the cooling tower and alignment of the equipment, testing and commissioning and handing over complete including insurance. Please note Cooling tower will be installed on Terrace (platform)

S/I/T/C of R S Joist of required sizes & dimensions as approved by structural consultant complete with cleaning & two coats of ANTIRUST epoxy painting. Suppy, Installation, Testing and Commissioning OF DX SYSTEm

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5Pm filter, self diagNos.is feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7 TR to 2.0 TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5Pm filter, self diagNos.is feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete as per specification no. AP/AC-CP

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete as per specification no. AP/AC-CP

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 22mm complete as per specification no. AP/AC-CP

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 32mm complete as per specification no. AP/AC-CP

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater /AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater /AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater /AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater /AC system.

Supply, Installation, testing and commissioning of Double Skin Ceiling / Floor mounted Air Handling Unit with forward / backward curved fan and variable speed drives as per AHU data sheet, VRV/DX coil/CHW coil as specified in AHU Data Sheet, Pre, thermostats, Canvass Connection, Vibration Isolators, supports, merv 8 & merv 13 filter shall be supplied as per the attached AHU data sheet. Filter shall be supplied as per the attached AHU data sheet. All AHU's will be with THERmAL BREAK profile. Contractor to consider necessary control & power cabling for PIBCV valve, heater bank etc. The cost of the AHU should include local control panel comparising of necessary starter, VFDs as specified. The Panel to have provision to recieve signal from Fire to trip. GD-AHU-FM-01

GD-AHU-CS-02

GD-AHU-FM-03

Supply, installation, testing and commissioning of mS ERW 'C' class chilled water piping with all necessary fittings i.e. bends, tees, reducers, flanges, structural supports, wooden blocks etc. All pipes shall be of PN-16 pressure rating. minimum 6mm base thickness for pipes as per 3589 for 150mm and above.Pipes to be further coated with primer and 2 coats of epoxy paint. sizes : 200 mm

Supply, installation, testing & commissioning of thermal insulation with factory laminated glass cloth for chilled water piping with class O,GC laminated nitrile rubber insulation of density 40-60Kg/Cum.The insulation thickness for various pipe sizes is mentioned below .Thermal Conductivity not to exceed 0.036 W/m.k at 24 Deg C (For Piping on floor not exposed to sunlight) 150 mm

Supply, installation, testing & commissioning of insulation for chilled water piping with TF quality thermacole and sand cement plaster to be quoted with two coats of paints as per specs. (For shafts) 150 mm with 100mm thick thermacole insulation

100 mm with 100mm thick thermacole insulation

80 mm with 100mm thick thermacole insulation

Supply, installation, testing & commissioning of insulation for chilled water piping with TF quality thermacole and sand cement plaster with factory laminated glass cloth & GI cladding (26 G) as per specs. (For plant room & pipe exposed to sunlight) 150 mm with 100mm thick thermacole insulation

100 mm with 100mm thick thermacole insulation

80 mm with 100mm thick thermacole insulation

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF- VL/BFV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 25 mm Ball Valve complete with PN16 pressure rating, as per specification no. FF-VL/BV

Providing and fixing 32/40 mm Ball Valve complete with PN16 pressure rating, as per specification no. FF-VL/BV

Providing and fixing 50 mm Ball Valve with complete with PN16 pressure rating, as per specification no. FF-VL/BV

Supply, Installation, testing & commissioning of the following sizes of Pressure Independent Balancing Cum Control Valve (2 Way) complete as per specifications of following. sizes for chilled water coil should be insulated with nitrile rubber of specified thickness & finish for PN-16 pressure rating. 100 mm

Y Strainer - Supplying and erecting 65 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV Non Return Valve ( NRV )

Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV Non Return Valve ( NRV )

Supply, installation, testing & commissioning of following sizes of butterfly valve suitable for 16Kg/ Sq.cm pressure with lug type construction, bolts, supports, matching flanges etc. as per specifications. 150 mm

Supply, installation, testing & commissioning of following sizes Vibration eliminators with double bellows, tie rods and mS flanges as a part of vibration. The vibration eliminators to be insulated type to avoid condensation. 250 NB

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 Kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Steam type Temperature gauge in chilled water line

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Flow switch

Differential Pressure gauge along with its cabling till VFD Panel

DRAIN PIPING:

50 mm dia

40 mm dia

Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting GI sheet 1.25 mm (18 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete.

Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC - 2007.(Auditorium Return Air)

Supply Duct insulation for ducting running below false flooring & in Auditorium by 25 mm Closed Cell Elastomeric Nitrile Rubber

Supply air Duct insulation by closedcell nitrile rubber 13mm (Stage Area)

Return air Duct insulation by closedcell nitrile rubber 9mm (Stage Area)

Accoustic Insulation by opencell nitrile rubber 15mm

Providing and applying of acoustic insulation for air ducts with 25mm thick, 48Kg/Cum fiber glass faced with RP tissue and covered with 26SWG perforated aluminium sheets complete.

Underdeck Insulation shall be soft with no irritation when exposed to human body. Product should have density of 24 Kg/Cum and thickness of 50 mm. It should be free from Formaldehyde and GREENGUARD Gold certified. Insulation has to be Hydrophobic. Fire resistance & should meets requirements of BS476: Part 4 (Non combustible), Part 6 (fire propagation), Part 7 (surface spread of flame). Fiberglass should be laminated with white facer. Facing to comply ASTm E84 for the test flame spread and smoke developed.

Acoustic insulation of AHU's surrounding walls (side walls and ceiling ) using 25mm thick glass wool rigid boards as per specs.

Acoustic insulation of AHU's surrounding walls (side walls and ceiling ) using 25mm thick glass wool as per specs.

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Supplying and installing of collar damper of galvanised iron material of upto 120microns for anti corrosive resistance for supply air grill of suitable size.

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°.

Supply and installation of aluminum jet nozzle. Heavy gauge construction eye ball type with inbuit cone. Suitable for long throw( 360⁰ rotation ). Powder coated finish. 400 mm dia

300 mm dia

Supply, installation ,testing and balancing of tiled square supply air diffusers with volume control dampers as per the approved shop drawing and specifications. Nos. diffuser shall be equipped with fixed air distribution grid, removable core for proper balancing of air distribution system Powder coated extruded aluminium diffusers of approved colour and shade of size 600mm x 600mm suitable for installation in modular ceiling with sizes of active sections given below. The diffusers to be full tile with the non- active portions blanked Off from above. All diffusers to look alike when viewed from below irrespective of the sizes. 450 mm x 450 mm.

Supply, testing, commissionig and balancing of GI constructed round diffuser for supply & rerurn air with adjustable cone of 400 mm Dia size & Nos.

Supply, installation, testing and commissioning air curtain of 4feet width having air throw velocity of 12 to 14m/sec, low noise level up to 38 to 46dBA suitable for door height upto 9feet, working on 1 phase, 230V, 50Hz, A.C. supply.

Fire Dampers

motorized actuators rated for fire dampers and spring return type.

Power cabling from localised fire controller to fire damper actuator.

Supply, installation, testing & commissioning of following sizes of pot strainer with matching flanges, bolts, supports etc.as per specifications. The valves to be insulated with nitrile rubber as per specs. All valves shall be of PN-16 pressure rating. 200 NB

Supplying, installing, testing and commissioning of INLINE FAN. The casing shall be double skin and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller.The motor shall be suitable for 220±10% volt single phase 50 cycles AC supply. 150 CFm

Supply, installation, testing and commissioning of Smoke Ventilation FANS including drive set, starter panels, vibration isolators etc. as per specifications. It should be made suitable for installing in Either Horizontal or vertical Positon. Fan should be thermally rated for 250°C for 120 minutes as per NBC 2016. The motor shall be suitable for 415 V + 10% volts three phase 50cycle, AC supply and suitable for operating at outdoor duty conditions. . All motors shall be IE2/ IE3 class. Totally enclosed Class F motor. The fan shall be equipped with mounting bracket & outlet core required at discharge.The cost should include all required support/m.S base frame/platform wherever required along with vibration isolation pads,supports, hangers, railing, brackets etc. Apply epoxy paint on stand/support. The fan shall be low RPm (less than 1000 RPm) and capacities based on static pressure or to suit the system, shall be as follows. Control panel with isolator should be considered in the cost suitable for taking the fire signal from fire alarm system.Noise level of fan shall be between 85 - 120 DB at 3 meter. Smoke Ventilation Fan=45000 cfm @ 25mm ESP

Smoke Ventilation Fan=15000 cfm @ 15mm ESP

Exhaust Aluminium Grilles for Toilet exhaust air 100mm X 100 mm

Dismantling the existing split type air conditioner of any type and capacity safely without any damages and making the site clear.

Dismantling of existing chiller along with pumps, necessary cables, cable tray, panels, piping, valves & accessories, etc safely without any damages and making the site clear.

Dismantling the existing AHU along with its piping, accessories, cabling, cable tray, panels & valves etc of any type and capacity safely without any damages and making the site clear.

Dismantling the existing Ducting with Insulation & accessories, etc.

Dismantling the existing CHW Piping

Supplying and erecting modular type computer Jack RJ 45 with safety shutter, on provided plate and box with wiring connections complete. (DATA/WIFI)

Supplying and fixing tool-less IO (ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying, fixing, and configuring 24-port 10/100m un-managed 10/100/1000 base-T gigabit switch compliant with IEEE 802.3 standards as per specification complete.

Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP

Supplying, fixing, and configuring 300 mbps single band wireless router having 4 Nos. of 10/100 LAN ports with 2 Nos. of external antennas compliant with IEEE 802.3 standards erected on desktop/wall complete.

Supplying and installing LSZH sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC

Supplying and erecting 12 fibers LSZH armoured multimode optical fiber cable with , core dia 50/125 µm (OCum), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-ELVC/OFC

Supplying and plugging 3 m fiber patch cord LC-LC mm (50) OCum LSZH duplex complete compliant to IEC 60793/IEC 60794 standards as per specification no. WG-ELVC/FPC

Supplying and fixing 2 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of cat 6 type compliant ANSI/TIA-568.2-D standards in position as per specification no. WG-ELVC/PC

Supplying, fixing, and configuring 10GbE SFP to SFP 1m direct attach cord complete as per specification no. WG-COC/PC

Supplying and fixing Cat 6, keystone jack RJ-45 information outlet compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 (ethernet) as per specification no. WG-NAS/KJ

Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing 1 x 12 Port SC duplex adapter panel-SC complete

Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & fiber switch/fiber module as per specification no. WG-NAS/mmA

Supplying and fixing SC/LC type multimode pigtails (OCUM) for LIU to terminate OFC in LIU as per specification no. WG-NAS/LIU2

Supplying and fixing power distribution unit for networking rack comprises of 6/16A (6 Nos. sockets), 16A modular mCB, appropriate rating, enclosed in black powder coated metal with necessary arrangement for fixing complete.

Supplying and erecting HmS PVC conduit 25mm dia. with PVC accessories on wall/ceiling as per specification no. WG-mA/CON.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x550x347 mm) as per specification no. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x550x480mm) as per specification no. WG-NAS/RAK

Supplying and fixing 27U floor mount rack (Dimension-DxWxH -800X600x1400 mm) as per specification no. WG-NAS/RAK