Shifting of 11KV line from the Therubali grid to Bhatpur due to widening of Komtalpeta-Muniguda -Tumudibandha road (00/00 Km to 30/00 Km) from 2 lane to 4 Lane

Shifting of 11KV line 11mtr long 160x152mm WPB pole

9Mtr long 300Kg PSC pole

11KV F clamp 2.9Kg each

11KV V cross arm(10.2Kg each)

Disc Insulator(T&C)45KN Polymer

Hard ware (T&C)45KN

11kV Pin Insulator Polymer

100x50x6mm GI channel for straight cross arm 1.2Mtr & 0.3Mtr (9.2Kg/Mtr)

Earthing coil

6SWG GI wire for earthing

RCC Base plate

55mmsq AAA Conductor

PG clamp for 55mm2 AAA conductor

G.I.Nuts & bolts of Assorated size

GI barbed wire (Anti climbing device @3Kg per support)

Back clamp for anticlinmbing device @3Kg per support

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

75x40x6mm MS channel,1.5mtr long -1s 3m*4nos for providing support for guarding at 1No of road crossing

8SWG GI wire for crossing lacing 12Kg for each road crosing

40mm nominal bore G.I.pipe(Medium guage) Earthing Device with 3mtr long

GI flat (25x6)mm @1.2Kg/Mtr 1No.Earthing at both sides of road crossing guarding

Sundries(Pole Numbering,Zebra Painting, Binding wire etc)

Shifting of 11/0.4KV 150KVA 9Mttr long 300 KG PSC pole

Presure channel 100x50x6mm (2.8Mx2PC)(9.2Kg/Mtr)with Galvanizing

AB switch mounting channel (75x40x6)mm 2.8mr long 2nos (6.8Kg/Mtr)with Galvanizing

HG fuse mounting channel (75x40x6)mm 2.8mtr long 2nos.(6.8Kg/Mtr)with Galvanizing

Cantiliverr GI channel for supporting AB switch arm 75x40x6mm -1mtr long 2nos(@6.8Kg/Mtr)

Cantiliver Angle for supporting AB switch 50x50x6mm G.I.Angle (1)mtr long 2nos(6.8Kg/Mtr)

Angle for mounting LT distributiion box (50x50x6)mm (4.5Kg/Mtr)with galvanizing.

Disc Insulator(T&C)45KN Polymer

Hard ware (T&C)45KN

HT stay set complete

7/10 SWG GI stay wire,Grade-2

HT stay clamp(1.9Kg/Pair)

40mm nominal bore G.I.pipe(Medium guage) Earthing Device with 3mtr long

GI flat 25x6mm

Erection charges for 150 KVA 11/0.4 KV transformer

GI Nuts & Bolts of Assoried size

55sqmm AAA conductor for jumpering

1Cx185mmsq LT XLPE cable(armoured)

Earthing coil

6SWG GI wire

Danger board

Back clamp for danger plate 25x3mm flat,0.59Kg/Mtr flat for 0.51mtr alength 1nos=(1x59x0.510)

G.I.Barbed wire(Anti climbing device@3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Sundries(Pole Numbering, Zebra Painting, Insulation tape etc)

Shifting of 11 KV Metering Unit DP Structure 9Mttr long 300 KG PSC pole

Presure channel 100x50x6mm (2.8Mx2PC)(9.2Kg/Mtr)

Earthing device/Support coil type(GI)

No.8 GI wire Dia 4.6mm 0.11Kg/Mtr each pole connnecting pole with Coil earthing

11kV Disc Insulator(B&S)45KN

11KV H/W fitting(B&S)

HT stay set complete

Sttay clamp

7/10 GI stay wire

G.I.pipe earthing 40mm dia medium guage 2.5mtr long

No.6 GI wire for earthing

Danger board

G.I.Barbed wire(Anti climbing device@3Kg per support)

GI Nuts & Bolts and washers

G.I.clamp for Danger board GI flat ([email protected]/Mtr)510mm length (0.306Kg/piece)

G.I. clamp for climbing device 25x3mm flat,0.6 Kg/Mtr flat of 0.510mtr length 4nos /Oike(1.22 Kg/Pole)

Sundries(Pole Numbering, Zebra Painting, Insulation tape etc)

Shifting of LT Poles 8 Mttr long 200 KG PSC pole

Pole clamp for I hook

Dead end clamp

Suspension clamp with I hook for ABC

GI Nuts & Bolts of Assoted size

LT stay set

LT stay clamp(1.40Kg/Pair)

7/12 SWG GI stay wire(Grade-2)

RCC Base plate for support

Earthing Device Coil type(GI)

CIVIL WORK Stay concreting to radio 1:2:4(0.5x0.5x0.8)mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307Cu.mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.44Cu.mtr

couping of poles in radio 1:1:5:3(500x500x475)=0.11875Cu.mtr

Materials for earthing inclduing massonary work for earth pit and cement plate cover including salt,charcoal etc

Civil cost for TRF plingth from 250KVA of upto 1000KVA provide necessary civil material,manpower ,machinery for construction o f plingth as per standard drawing.

G.I.fencing with Gate

Dismentling of 9/8 PCC/Joist pole (Servicable pole)after digging the pit and taking out the pole,transportation and stacking the pole at a proper place in safe position within 10Km /site store andrefilling the pit with loose earth and ramming including removal and disposal of malba at proper location as per instruction of EIC.

Dismentling of Steel structure (Angle/Channel/Flat)and Nuts and Bolt including loading, Transportation, unloading and staking of dismentied material at a proper place in safe position/BA site store

Dismantle-34-55sqmm AAAC conductor

11KV Rodad Crossing Guarding 11mtr long 160x152mm WPB pole

11KV F clamp 2.9Kg each

11KV V cross arm(10.2Kg each)

G.I.Back clamp for V cross arm(11kV)0.85 each

11kV Pin Insulator Polymer

Earthing coil

6SWG GI wire for earthing

G.I.Nuts & bolts of Assorated size

GI barbed wire (Anti climbing device @3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Danger board

75x40x6mm MS channel, Guarding-1s 3m*4nos for providing support for guarding at 1No of road crossing

8SWG GI wire for crossing lacing 12Kg for each road crossing

40mm nominal bore G.I.pipe (Medium guage)earthing device with 3Mtr long

Eye Hook

G.I.flat (25x6)mm @1.2Kg/Mtr 1No earthing at both side s of road crossing guarding.

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

LT line road crossing 9 Mttr long 200 KG PSC pole

Pole clamp for I hook

Dead end clamp

Eye hook for Dead end clamp

GI Nuts & Bolts of Assoted size

7/12 SWG GI stay wire(Grade-2)

RCC Base plate for support

Earthing Device Coil type(GI)

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

CIVIL WORK Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307Cu.mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.44Cu.mtr

Coupling of poles in radio 1:1:5:3 (500x500x475)=0.11875 Cu.mtr

Dismentling of 9/8Mtr PCC/Joist pole (servicecable pole)after digging the pit and taking out the pole,transportation ans stacking the pole at a proper plate in safe position within 10km /site store and refilling the pit with loose earth and remaining including removal and sisposal of malba at proper location as per instruction of EIC.

Shifting of 11KV line 11mtr long 160x152mm WPB pole

9Mtr long 300Kg PSC pole

11KV F clamp 2.9Kg each

11KV V cross arm(10.2Kg each)

G.I.Back clamp for V cross arm(11kV)0.85 each

Disc Insulator (T&C)45KN Polymer

Hardware(T&C)45KN

11kV Pin Insulator Polymer

100x50x6mm GI chan nedl for straight cross arm 1.2Mtr & 0.3Mtr(9.2Kg/Mtr)

Earthing coil

6SWG GI wire for earthing

RCC base plate

55mmsq AAA conductor

PG clamp for 55mm2 AAA conductor

G.I.Nuts & bolts of Assorated size

GI barbed wire (Anti climbing device @3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

75x40x6mm MS channel, Guarding-1s 3m*4nos for providing support for guarding at 1No of road crossing

8SWG GI wire for crossing lacing 12Kg for each road crossing

40mm nominal bore G.I.pipe (Medium guage)earthing device with 3Mtr long

Eye hook

G.I.flat (25x6)mm @1.2Kg/Mtr 1No earthing at both side s of road crossing guarding.

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

Shifting of 11/0.23KV 16KVA S/S 9Mttr long 300 KG PSC pole

2Cx16sqmm PVC cable(Unarmoured)

HT stay set complete

11KV Stay Insulator

7/10 SWG GI stay wire

Stay clamp(1.95 Kg/Pair)

55mmm2 AAAC

G.I.pipe Earthing 40mm dia medium guage 2.5mtr long

Base plate for support

11KV Disc Insulator(B&S) Polymer

11KV H/W fittingh B&S (2 Bolted)type

Earthing Coil

6SWG GI wire

G.I.Barbed wire(Anti climbing device@3Kg per support

Back clamp for anti climbing device 25x3mm flat 0.59 Kg/Mtr flat of 0.510 Mtr length 4Nos-(4.0.59x0.510)

Danger plate

Back clamp for anti climbing device 25x3mm flat 0.59 Kg/Mtr flat of 0.510 Mtr length 1Nos-(1.0.59x0.510)

Sundries(Paint Allumin ium wire & tape,insulting tape sockets. clamp,connector and jumpering materials etc)

Shifting of LT poles 8 Mttr long 200 KG PSC pole

Pole clamp for I hook

Dead end clamp

Eye hook for Dead end clamp

Suspension clamp with I hook for ABC

GI Nuts & Bolts of Assoted size

LT stay set

LT stay insulator

LT stay clamp(1.40Kg/Pair)

7/12 SWG GI stay wire(Grade-2)

RCC Base plate for support

Earthing Device Coil type(GI)

6SWG GI wire

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

CIVIL WORK Stay concreting to radio 1:2:4(0.5x0.5x0.8)mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307Cu.mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.44Cu.mtr

couping of poles in radio 1:1:5:3(500x500x475)=0.11875Cu.mtr

Materials for earthing inclduing massonary work for earth pit and cement plate cover including salt,charcoal etc

Dismentling of 9/8 PCC/Joist pole (Servicable pole)after digging the pit and taking out the pole,transportation and stacking the pole at a proper place in safe position within 10Km /site store andrefilling the pit with loose earth and ramming including removal and disposal of malba at proper location as per instruction of EIC.

Dismentled 34-55sqmm AAAC conductor

Shifting of 11KV line 11mtr long 160x152mm WPB pole

9Mtr long 300Kg PSC pole

Earthing coil

6SWG GI wire for earthing

RCC base plate

55mmsq AAA conductor

PG clamp for 55mm2 AAA conductor

G.I.Nuts & bolts of Assorated size

GI barbed wire (Anti climbing device @3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

75x40x6mm MS channel, Guarding-1s 3m*4nos for providing support for guarding at 1No of road crossing

8SWG GI wire for crossing lacing 12Kg for each road crossing

40mm nominal bore G.I.pipe (Medium guage)earthing device with 3Mtr long

Eye hook

G.I.flat (25x6)mm @1.2Kg/Mtr 1No earthing at both side s of road crossing guarding.

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

Shifting of 11/0.4KV 250KVA S/S 11mtr long 160x152mm WPB pole

AB switch (11KV,200A,3pole,50HZ)

HG fuse (11KV,200A,3pole)with PI

LA(9KV,10KA)Station class

Disc Insulator (T&C)45KN Polymer

Hardware(T&C)45KN

HT stay set complete

7/10 SWG GI stay wire,Grade-2

Stay insulator

HT stay clamp(1.9Kg/Pair)

40mm nominal bore G.I.pipe (Medium guage)earthing device with 3Mtr long

GI flat 25x6mm

250 KVA,11/0.4KVATransformer BIS Energy level-II

GI Nuts & Bolts of Assoted size

55sqmm AAA conductor for jumpering

1Cx185sqmm LT XLPE cable(armoured)

Earthing coil

6SWG GI wire

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

G.I barbed wire (Anti climbing device@3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Sundries(Paint Allumin ium wire & tape,insulting tape sockets. clamp,connector and jumpering materials etc)

Shifting of LT poles 9 Mttr long 300 KG PSC pole

8Mtr long 200Kg PSC pole

pole clamp for clamp

Dead end clamp

Eye hook for Dead end clamp

Suspension clamp with I hook for ABC

GI Nuts & Bolts of Assoted size

LT stay set

LT stay Insulator

LT stay clamp(1.40Kg/Pair)

7/12 SWG GI stay wire,Grade-2

RCC base plate for support

Earthing Device Coil type(GI)

6SWG GI wire

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

CIVIL WORK

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307Cu.mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.44Cu.mtr

couping of poles in radio 1:1:5:3(500x500x475)=0.11875Cu.mtr

Materials for earthing inclduing massonary work for earth pit and cement plate cover including salt,charcoal etc

Civil cost for making TRF plinth from 250KVA of Dismentling of 9/8 PCC/Joist pole (Servicable pole)after digging the pit and taking out the pole,transportation and stacking the pole at a proper place in safe position within 10Km /site store andrefilling the pit with loose earth and ramming including removal and disposal of malba at proper location as per instruction of EIC.

Dismentling 55sqmm AAAC conductor

Dismentling of existing 11/0.4KV ,250 KVA Three phase Distribution Transformer including removalof HT/LT leads,earth connections and unloading by crane if required. Scope of work also includes loading,transportation,unloading and staking at proper place in safe position/site store.

Stay concreting to radio 1:2:4(0.5x0.5x0.8)mtr

11KV F clamp 2.9Kg each

11KV V cross arm(10.2Kg each)

G.I.back clamp for V cross arm(11kV)0.85 each

Disc insulator(T&C)45KN polymer

Hardware(T&C)45KN

11KV Pin Insulator Polymer

100x50x6mm G.I.channel for straight cross arm (including tapping point)

Earthing coil

6SWG GI wire for earthing

RCC Base plate

55mm2 AAA conductor

PG clamp for 55mmm2 AAA conductor

G.I.Nuts & bolts of Assorated size

GI Barbed wire(Anti climbing device@3Kg per support)

Back clamp for Danger plate 25x3mm flat (0.59Kg/Mtr)flat of 0.510 mtr length 4nos-(4x0.59x0.510)

Back clamp for Danger plate 25x3mm flat (0.59Kg/Mtr)flat of 0.510 mtr length 1nos-(1x0.59x0.510)

Sundries(Pole Zebra painting,Binding wire etc)

Shifting of 11kV line 9Mtr long 300KG PSC pole

pressure channal 100x50x6mm (2.8Mx2Pc)(0.9.2Kg/Mtr)with Galvanizing

A.B.switch mounting channel75x40x6mm (1.2mtr long 2nos 6.8Kg/Mtr)with Galvanizing

Cantilever GI channel for supporting AB switch arm,75x40x6-1mtr long 2Nos @6.8Kg/Mtr)

Cantilever angle for support ing AB switch 50x50x6mm G.I.Angle (1)mtr long [email protected]/Mtr)

AB switch side support channel 100x50x6mm 9.2Kg/Mtr eachg channel length 0.35Mtr,2nos channel required

AB switch 11KV,400A,3pole,50HZ)

LA(9KV,100A)station class

Disc insulator (T&C)45KN polymer

Hardware(T&C)45KN

HTstay set complete

Stay insulator

HT stay clamp(1.9Kg/Pair)

40mm nominalk bore G.I.pipe (Medium guage)earthing Device with 3mtr long

GI flat 25x6mm

G.I.Nuts and Bolts of Assorted size

Earthing coil

Earthing coil

6SWG GI wire

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Sundries(Pole numbering,Zebra painting,Insulation tape etc)

Shifting of 11KV line DP Structure 11Mtr long 160x152mm WPB pole

pressure channal 100x50x6mm (2.8Mx2Pc)(0.9.2Kg/Mtr)with Galvanizing

Transformer mounting channel(100x50x6)mm 2.8Mtr long 2nos(9.2Kg/Mtr)with Galvanizing

AB switch mounting channel(75x40x6) mm 2.8 mtr long 2nos(6.8Kg/Mtr)with alvanizing

HG fuse mounting channel(75x40x6)mm 2.8mtr long 2nos(6.8Kg/Mtr)with Galvanizing

Cantiliver GI channel for supporting AB switch arm,75x40x6-1mtr [email protected]/Mtr)

Cantiliver GI channel for supporting AB switch arm,50x50x6-1mtr [email protected]/Mtr)

Angle for mounting LT distribution box (50x50x6)mm 4.5Kg/Mtr with Galvanizing

AB switch side support channel 100x50x6mm 9.2KG/Mtr each channel length 0.35mtr,2nos channel required.

Channel support for down pipe 75x40x6mm,6.8Kg/Mtr each channel length 0.8mtr,1no channel required.

Transformer belting angle (50x50x6)mm 3.5mtr long-2nos(4.5Kg/Mtr)with Galvanizing.

AB switch (11KV,200A,3pole,50HZ)

HG fuse(11kV,200A,3pole)with PI

LA(9KV,10KA)Station class

Disc insulator(T&C)45KN polymer

Hardware(T&C)45KN

HT stay set complete

7/10 SWG GI stay wire,Grade-2

Stay insulator

HT stay clamp(1.9Kg/Pair)

40mm nominal bore G.I.pipe(medium guage)Earthing device with 3mtr long

G.I.flat 25x6mm

Erection charge for 25KVA substation 11/0.4 kva

G.I.Nuts and Bolts of Assorted size

55sqmm AAA conductor for jumpering

Earthing coil

6SWG GI wire

Danger board

Back clamp for danger plate 25x3mm flat,0.59Kg/Mtr flat for 0.51mtr length 1nos= (1x59x0.510)

GI barbed wire(Anti climbing device@3Kg per support)

Back clamp for danger plate 25x3mm flat,0.59Kg/Mtr flat for 0.51mtr length 4nos= (4x59x0.510)

Sundries(Pole numbering,zebra painting insulation tap etc)

Shifting of 11/0.4KV 25KVA S/S 9Mtr long 300KG PSC pole

8mtr long 200Kg PSC pole

Pole clamp for I hook

Dead end clamp

Eye hook for dead end clamp

Suspension clamp with I hook for ABC

G.I.Nuts and Bolts of Assorted size

Lt stay set

LT stay insulator

LT stay clamp(1.40Kg/Pair)

7/12 SWG GI stay wire,Grade-2

RCC Base plate for support

Earthing device coil type(GI)

Sundries(Pole Zebra painting,Binding tape and other accessories etc)

Shifting of 1P2W AB cable 9 Mtr long 300KG PSC pole

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307cu.mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.44cu.mtr

couping of poles in radio 1:1:5:3(500x500x475)=0.11875Cu.mtr

Materials for earthing inclduing massonary work for earth pit and cement plate cover including salt,charcoal etc

GI fencing with Gate

Dismentling of 9/8Mtr PCC/Joist pole (servicecable pole)after digging the pit and taking out the pole,transportation ans stacking the pole at a proper plate in safe position within 10km /site store and refilling the pit with loose earth and remaining including removal and sisposal of malba at proper location as per instruction of EIC.

Dismentling 34-55sqmm AAAC conductor

Dismentling of 11KG/33KV GO/AB switch/Isolator/DD fuse/fuse set including removal of all Electric earth connections,loading,transportration ,unloadibng and staking at a proper place in safe position/BA site store(Note set=Three phase)

Dismentling of existing 11/0.4KV ,250 KVA Three phase Distribution Transformer including removalof HT/LT leads,earth connections and unloading by crane if required. Scope of work also includes loading,transportation,unloading and staking at proper place in safe position/site store.

CIVIL WORK Stay Concreting in radio 1:2:4(0.5x0.5x0.8).mtr

11KV F clamp 2.9Kg each

11KV V cross arm(10.2Kg each)

G.I.Back clamp for V cross arm(11kV)0.85 each

11kV Pin Insulator Polymer

Disc insulator(T&C)45KN polymer

Hardware(T&C)45KN

100x50x6mm GI channel for straight cross arm 1.2Mtr & 0.3Mtr(9.2Kg/Mtr

55mmsq AAA conductor

PG clamp for 55mm2 AAA conductor

Earthing coil

6SWG GI wire for earting

G.I.Nuts & bolts of Assorated size

GI barbed wire (Anti climbing device @3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

75x40x6mm MS channel, Guarding-1s 3m*4nos for providing support for guarding at 1No of road crossing

8SWG GI wire for crossing lacing 12Kg for each road crossing

40mm nominal bore G.I.pipe (Medium guage)earthing device with 3Mtr long

Eye hook

G.I.flat (25x6)mm @1.2Kg/Mtr 1No earthing at both side s of road crossing guarding.

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

11KV Road Crossing Guarding 11mtr long 160x152mm WPB pole

Pole clamp for I hook

Suspension clamp with I hook for ABC

GI Nuts & Bolts of Assoted size

RCC Base plate for support

Earthing Device Coil type(GI)

6SWG GI wire

Sundries(Pole,Zebra painting,Binding tape and othr accedssories etc)

LT line Road Crossing 9 Mtr long 300 KG PSC pole

Coupling of poles in radio 1:1:5:3 (500x500x475)=0.11875 Cu.mtr

Dismentling of 9/8Mtr PCC/Joist pole (servicecable pole)after digging the pit and taking out the pole,transportation ans stacking the pole at a proper plate in safe position within 10km /site store and refilling the pit with loose earth and remaining including removal and sisposal of malba at proper location as per instruction of EIC.

Dismentile-34-55sqmm AAAC conductor

CIVIL WORK Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307Cu.mtr

9Mtr long 300KG PSC pole

Disc insulator(T&C)45KN polymer

Hardware(T&C)45KN

11KV Pin insulator polymer

100x50x6mm GI channel for straight cross arm 1,2Mtr & 0.3Mtr(9.2Kg/Mtr)

HT stay set complete

7/10 SWG GI stay wire,Grade-2

Stay insulator

HT stay clamp(1.9Kg/Pair)

Earthing coil

6SWG GI wire for earthing

RCC Base plate

55mm sq AAA conductor

PG clamp for 55mm2 AAA conductor

G.I.Nuts & bolts of Assorted size

G.I.Barbed wire (Anti climbing device@3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Danger board

Back clamp for Danger plate 25x3mm flat (0.59Kg/Mtr)flat of 0.510 mtr length 1nos-(1x0.59x0.510)

75x40x6mm MS Channel 1,5mtr 4Nos for providing support Guarding at 1No road crossing.

8SWG GI wire for cross lacing 12Kg for each Road Crossing

40mm nominal bore G.I. pipe(Medium guage Earthing Device with 3mtr long

Eye hook

G.I.flat (25x6)[email protected]/Mtr 1No earthing at both sides of road crossing guarding.

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

Shifting of 11KV line 11Mtr long 160x152mm WPB pole

8Mtr long 200Kg PSC pole

Pole clamp for I hook

Dead end clamp

Eye hook for Dead end clamp

Suspension clamp wih I hook for ABC

G.I.Nuts & bolts of Assorted size

LT stay set

LT stay insulaor

LT stay clamp(1.4Kg/Pair

7/12 SWG GI stay wire(Grade-2)

RCC Base plate for support

Earthing Device coil type(GI)

6SWG GI wire

Sundries(Pole Numbering,Zebra Painting,Binding tape and other accessories etc)

Shifting of LT poles 9Mtr long 300KG PSC pole

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307cu.mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.44cu.mtr

couping of poles in radio 1:1:5:3(500x500x475)=0.11875Cu.mtr

Materials for earthing inclduing massonary work for earth pit and cement plate cover including salt,charcoal etc

Dismentling of 9/8Mtr PCC/Joist pole (servicecable pole)after digging the pit and taking out the pole,transportation ans stacking the pole at a proper plate in safe position within 10km /site store and refilling the pit with loose earth and remaining including removal and sisposal of malba at proper location as per instruction of EIC.

Dismentling 34-55sqmm AAAC conductor

CIVIL WORK Stay Concreting in radio 1:2:4(0.5x0.5x0.8).mtr

9Mtr long 300KG PSC pole

11KV F clamp 2.9Kg each

11KV V Cross arm(10.2Kg each)

G.I.Back clamp for V cross arm(11kV)0.85 each)

Disc insulator(T&C)45KN polymer

Hardware(T&C)45KN

11KV Pin insulator polymer

100x50x6mm GI channel for straight cross arm 1,2Mtr & 0.3Mtr(9.2Kg/Mtr)

Earthing coil

6SWG GI wire for earthing

RCC Base plate

55mm sq AAA conductor

PG clamp for 55mm2 AAA conductor

G.I.Nuts & bolts of Assorted size

G.I.Barbed wire (Anti climbing device@3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Danger board

Back clamp for Danger plate 25x3mm flat (0.59Kg/Mtr)flat of 0.510 mtr length 1nos-(1x0.59x0.510)

75x40x6mm MS Channel 1,5mtr 4Nos for providing support Guarding at 1No road crossing.

8SWG GI wire for cross lacing 12Kg for each Road Crossing

40mm nominal bore G.I. pipe(Medium guage Earthing Device with 3mtr long

Eye hook

G.I.flat (25x6)[email protected]/Mtr 1No earthing at both sides of road crossing guarding.

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

Shifting of 11KV line 11Mtr long 160x152mm WPB pole

Pressure channel (110x50x6)mm 2.8mtr long 2nos (9,.2Kg/Mtr)with Galvanizing

AB switch mounting channel (75x40x6)mm 2.8mtgr long 2nos (6.8Kg/Mtr)with Galvanizing

Cantiliver GI channel for supporting AB switch arm,75x40x6-1mtr long [email protected]/Mtr

Cantiliver angle for supporting AB switch 50x50x6,GI angle (1)mtr long [email protected]/Mtr)

AB switch mounting channel (100x50x6)mm 9.2Kg /Mtr each channel length 0.35Mtr,2nos channel required

AB switch (11Kv,400A,3pole,50HZ)

LA(9KV,10KA)Station class

Disc insulator (T&C)40KN Polymer

Hard ware(T&C)45KN

HT stay set complete

7/10 SWG GI stay wire,Grade-2

Stay insualtor

Ht stay clamp (19Kg/Pair)

40mm nominal bore G.I.pipe medium guage Earthing Device with 3mtr long

G.I.flat 25x6mm

G.I.Nuts & bolts of Assorted size

Earthing coil

6SWG GI wire

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

G.I.Barbed wire (Anti climbing device@3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Sundries(Pole Numbering,Zebra Painting,Binding wire etc)

shifting of 11KV line AB Switch with DP structure 11Mtr long 160x152 mm WPB pole

Pressure channel(100x50x6)mm 2.8mtr long 2Nos(9.2Kg/Mtr)with Galvanizing

Transformer Mounting Channel(100x50x6)mm 2.8Mtr long 2Nos(9.2Kg/Mtr)with Galavanizing

AB switch mounting channel(75x40x6)mm 2.8mtr long 2nos(6.8Kg/Mtr)with Galanizing

HG fuse mounting channel (75x40x6)mm 2.8Mtr long 2nos(6.8Kg/Mtr)with Galvanizing

Cantilever GI channel for supporting AB Switch arm,75x40x6.1Mtr long,[email protected]/Mtr)

Cantiliver Angle for mounting supporting AB switch (50x50x6)mmG.I.Angle (1)mtr long 2nos)@4.5Kg/Mtr)

Angle for mounting LT distribution box (50x50x6)mm(4.5Kg/Mtr)with Galvanizing

AB switch side support channel100x50x6mm 9.2Kg/Mtr each channel length 0,.35Mtr,2nos channel required

Channel support for down pipe 75x40x6mm 6.8Kg/Mtr each channel length 0.8Mtr,1no channel required

Transformer belting angle (50x50x6)mm 3.5Mtr long 2nos(4.5Kg/Mtr)with Galvanizing

AB switch (11KV,200A,3pole-50HZ)

HG fuse(11KV,200A,3pole)wth PI

LA(9KV,10KA)Station class

Disc insulator (T&C)40KN Polymer

Hard ware(T&C)45KN

HT stay set complete

7/10 SWG GI stay wire,Grade-2

Stay insualtor

Ht stay clamp (19Kg/Pair)

40mm nominal bore G.I.pipe medium guage Earthing Device with 3mtr long

GI flat 25x6mm

LT Distribution box with MCCB Alluminium busbar of single Bay with kit kat fuse for 25KVA S/S

GI Nuts & Bolts of Assoted size

55sqmm AAA conductor for jumpering

1Cx70sqmm LT XLPE cable(armoured)

Earthing coil

6SWG GI wire

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

G.I barbed wire (Anti climbing device@3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Sundries(Paint Allumin ium wire & tape,insulting tape sockets. clamp,connector and jumpering materials etc)

Shifting of 11/0.4KV,25KVA S/S-1No(9mtr PSC pole DP) 9Mtr long 300KG PSC pole

Pressure channel(100x50x6)mm 2.8mtr long 2Nos(9.2Kg/Mtr)with Galvanizing

Transformer Mounting Channel(100x50x6)mm 2.8Mtr long 2Nos(9.2Kg/Mtr)with Galavanizing

AB switch mounting channel(75x40x6)mm 2.8mtr long 2nos(6.8Kg/Mtr)with Galanizing

HG fuse mounting channel (75x40x6)mm 2.8Mtr long 2nos(6.8Kg/Mtr)with Galvanizing

Cantilever GI channel for supporting AB Switch arm,75x40x6.1Mtr long,[email protected]/Mtr)

Cantiliver Angle for mounting supporting AB switch (50x50x6)mmG.I.Angle (1)mtr long 2nos)@4.5Kg/Mtr)

Angle for mounting LT distribution box (50x50x6)mm(4.5Kg/Mtr)with Galvanizing

AB switch side support channel100x50x6mm 9.2Kg/Mtr each channel length 0,.35Mtr,2nos channel required

Channel support for down pipe 75x40x6mm 6.8Kg/Mtr each channel length 0.8Mtr,1no channel required

Transformer belting angle (50x50x6)mm 3.5Mtr long 2nos(4.5Kg/Mtr)with Galvanizing

AB switch (11KV,200A,3pole-50HZ)

HG fuse(11KV,200A,3pole)wth PI

LA(9KV,10KA)Station class

Disc insulator (T&C)45KN Polymer

Hard ware(T&C)45KN

HT stay set complete

7/10 SWG GI stay wire,Grade-2

Stay insualtor

Ht stay clamp (19Kg/Pair)

40mm nominal bore G.I.pipe medium guage Earthing Device with 3mtr long

G.I.flat 25x6mm

Erection charge for 25KVA substation 11/0.4 kva

LT Distribution box with MCCB Alluminium busbar of single Bay with kit kat fuse for 63KVA S/S

GI Nuts & Bolts of Assoted size

55sqmm AAA conductor for jumpering

1Cx70sqmm LT XLPE cable(armoured)

Earthing coil

6SWG GI wire

Danger board

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 1nos-(1x0.59x0.510)

G.I.Barbed wire (Anti climbing device@3Kg per support)

Back clamp for anticlimbing device 25x3mm flat,0.59Kg/Mtr flat of 0.510mtr length 4nos-(4x0.59x0.510)

Sundries(Pole Numbering,Zebra Painting,Binding tape and other accessories etc)

Shifting of 11/0.4KV 63KVA S/S -1No(9Mtr PSC pole DP)pole mounted 9Mtr long 300KG PSC pole

G.I.Nuts and Bolts of Assorted size

Lt stay set

LT stay insulator

LT stay clamp(1/40Kg/Pair)

7/12 SWG GI stay wire,Grade-2

RCC Base plate for support

Earthing Device Coil type(GI)

6SWG GI wire

Sundries(Pole Zebra painting,Binding tape and other accessories etc)

Shifting of LT poles 9 Mtr long 300KG PSC pole

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.307cu.mtr

Concreting of poles in radio 1:1:5:3(500mmx500mmx1800mm)=0.44cu.mtr

couping of poles in radio 1:1:5:3(500x500x475)=0.11875Cu.mtr

Materials for earthing inclduing massonary work for earth pit and cement plate cover including salt,charcoal etc

GI fencing with Gate

Dismentling of 9/8Mtr PCC/Joist pole (servicecable pole)after digging the pit and taking out the pole,transportation ans stacking the pole at a proper plate in safe position within 10km /site store and refilling the pit with loose earth and remaining including removal and sisposal of malba at proper location as per instruction of EIC.

Dismentling 34-55sqmm AAAC conductor

Dismentling of existing 11/0.4KV, Three phase Distributiion Transformer 63KVA including removal of HT/LT leads,earth connections and unloading by crane required.Scope of work also iincludes loading, transportation, unloadingand staking at a proper place in safe postion/site store

Dismentling of existing 11/0.4KV,33/0.4KV, ,25KVA Three phase Distribution Transformer including removalof HT/LT leads,earth connections and unloading by crane if required. Scope of work also includes loading,transportation,unloading and staking at proper place in safe position/site store.