SPECIAL REPAIR TO BOUNDARY WALL IN FRONT OF DSC LINE AT AF STN DIGARU.

Amount

Excavating over areas, n exc 1.5 m deep and getting out in soft loose soil complete all as specified and as directed.

Ditto all as item No. 1.00 above but each additional 1.5 m or part thereof in depth beyond the first 1.5 m

Excavation in trenches n exc. 1.5 m wide and n. exc. 1.5 m depth for foundation etc. n. exc. 10 sqm on plan and getting out in soft /loose soil.

M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat rough finished surface of concrete complete all as specified and as directed.

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions, square, rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.for flat rough finished surfaces complete all as specified and as directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC M-25 disgn mix using 20 mm grade stone aggregate as in Columns, pillars, piers,posts and struts complete all as specified and directed.

M&L brick work with sub class 'B' bricks strait or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on internal surfaces of wall complete all as specified and as directed.

M&L for preparation of newly plastered surface and applying two coat of Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as per manufacturer instruction.

M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed

Ditto all as Item No. 14.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

S/F MS steel post struts fencing post including cutting top to shape,drilling holes notching for wire etc including all necessary drilling bolting andd similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10cm in width or girth not otherwise described

M &L for preparation of new steel surfaces and applying two coats of black bituminious paint exceeding 10cm in width or girth all as specified and as directed.

S&F galvanized two stranded steel barbed wire 2.24 mm dia barbed with 2mm dia berb at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staple or steel pins etc complete all as specified and as directed. Note : Each line wire to be measured.

S&F Concertina coil 600mm Dia/56 Loops/2.5 mm core wire. Coil Diameter:600 mm. Type of Strip: Heavy Galvanized (IS 1730) Type of Core Wire: Heavy Galvanized (IS 280-2006) Core wire Diameter:2.50mm Dia Zinc coating to Strip: Minimum 200 GSM/Sq mm, Zine Coating on wire: Minimum 275 GSM/Sq mm (IS 6745-1972 reaffirmed 2006). Tensile Strength of wire 1400-1500 N/Sq mm Weight: 14.63 Kg (+5%) Number of Loops: 56 Blade Length: 22mm Barb Profile Medium Blade (MBBT) Distance Between Barb 35mm. Strechable length 12 mtrs. Type of clip Hardened Steelin Galvanized steel.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as directed.

M&L for precast cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate sent in CM (1:6) as in coping complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in hard dense soil complete all as specified and as directed.

Removing excavated soil n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M/s Ravi Enterprise

Ms N D Enterpise

TRADE CENTRE