REPAIR TO JOINERY, RAILING, STAIRCASE, ROLLING SHUTTERS, WALL PANELING FALSE CELLING GUARD TARGETS, MEDIA GALLERY ETC AT 03 AFRU UNDER GE (AF) JAISALMER

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Taking down & Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening complete all as specified and directed.

Taking down window/ventilator (Any type) including making good disturbed area complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, door stopper, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F powder coated anodised aluminium expanded metal mesh of any size/shape for window/ventilator fixed in Aluminium frame with aluminium snap beading, screws etc. all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with aluminium snap beading.

S&F in repairs Door closer hydraulically regulated aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair double action floor spring hydrolically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box main body with stainless steel cover governing pivot made of brass , other prts made of mild steel heavey duty and fixed in repairs. complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink.

M&L for Rounding to edges of stone slabs one edge such as in steps,cooking platform, window cill and other similer situations

M & L colour ACP sheet 4 mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to any frame work

Mild steel farmed work as in doors (as in ckowkats/frame structure) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.

S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood (Hollock/Sal/Bijasal), locally febricated glazed skeleton door shutters open rebated and prepare to receive glass, gauge (without sash bars) edges of framing plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed.

S&F 35mm factory made second class hard wood 35 mm thick plain framed, panneled framed panneled shutter ( two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both side face specification complete all as specified and directed by Engr-in-Charge.

S & F Solid PVC door frame for PVC doors, of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II)

S&F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with aluminium snap beading.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed.

M & L for prepariation of newly steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F in repairs Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spd and dir.

S&F in repair 25mm dia stainless steel curtain rod with fancy type sides cups and brackets all as specified and directed by Engr-in-Charge, sample kept in GE office

S&F 3.0 mm thick Plain glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane incl dismanling damage glass complete all as specified and directed.

S&F 3.0 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane incl dismanling damage glass complete all as specified and directed.

Hacking out old broken glasses any thickness size, quality or description from metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. hacking any bldg hight complete all as specified and as directed.

S&F 0.50mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 bent in any curve radius including dismentling complete all as specified and directed..

Dismantling wall and ceiling boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, any thickness, including cover fiilets complete all as specified and directed.

M&L for PVC Shutter made out of solid PVC form profile 18 mm thick homogeneous fine cellular structure panelled having styles and rails of size 45 mm x 20 mm joints mitred at corners. The panel shall be made of 3 mm thick HPL sheet cover with moulding of size 35 mm 15 mm in any colour both side including stainless steel modular hinges,magnet catchers, handles & Knobs etc Make: Hettick. PVC sheet make -Accucel / Rajshree / Duroplast.

6mm thick plain, PVC sheeting, as in sheet lining to PVC door fixed with screws / nails of suitable size fixed as in repair complete all as specified and directed.

5 mm thick plain, wood ply sheeting, as in sheet lining to wooden door fixed with screws / nails of suitable size fixed as in repair complete all as specified and directed.

M&L for 12 mm thick plain, wood ply sheeting, as in garud tower fixed with screws / nails of suitable size fixed as in repair complete all as specified and directed.

M&L for 40 mm thick hard wooden plank, fixed with screws / nails of suitable size fixed as in repair complete all as specified and directed.

M&L for 4 mm thick plain MDF, as in garud tower fixed with screws / nails of suitable size fixed as in repair complete all as specified and directed.

M&L in repair 1 mm thick vaneer mica laminated over door, cupboard etc complete all as specified and directed.

M&L for stainless steel basket of different pattern like plate rack,bottle rack etc,fixed with and including adjustable sliding steel channels to kitchen cabin,pattern and no of steel racks will be specified and directed .

M&L 7 to 9 mm thick prelaminated design gypsum board for fixing in 600 mm x 600mm as in false ceiling incl powdr coated GI grid system and adjustabe suspender and fastening arrangement complete all as specified and directed.

M&L Solid PVC Wall Lining consisting of 5 mm thick wood grain printed PVC sheet used instead of plain colour sheet and fixing at site with and including 35mm wide and 5mm thick PVC fillets provided as per SSR.

S&F in repairs Mortice lock brass, vertical type, size 100mm 4 lever for alluminium door complete all as spd and dirt.

M & L in repair 12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door all as specified and directed.

M & L in repair 12mm thick plain / froasted toughned glass with aluminium frame supplied and fixed at site in aluminium snap bedding fittings for glass all as specified and directed.

S&F in repair 150mm long extruded aluminum handles fabricated type anodized, ISI marked complete all as specified and directed.

-Ditto- Same as above item No-49 but custom type decorated type made of brass as per direction of Engineer-in-Charge.

S&F in repair 250 mm sliding bolt custom type decorated type made of brass as per direction of Engineer-in-Charge.

S&F in repair 250 mm Tower bolt custom type decorated type made of brass as per direction of Engineer-in-Charge.

Repair to rolling shutter exc (5 mtr height but n execeeding 7 mtr height) including repair gear box, rolling system of shutter, oliling and gressing making free movement of rolling shuttter as per spd and directed

S&F in repair steel gate/wicket gate with 2 handle, hold fast, sliding bold as per direction of engr in charge.

Stone railing having both side carving of approved design and pattern (Jali pattern) Type "B" using yellow Jaisalmer stone) all as for type "B' and Sketch 'A' shown on drawings No.SKETCH/DRG/GE/(AF)/J/01/2021suitable for flat surfaces containing 30-40cm wide, 10cm thick base stone fixed in existing floor after cutting 50mm deep groove of width equal to base stone width and fixed to existing floor using proper adhesive as per manufacture's instructions. The stone railing to be fixed in base stone in groove 50mm deep (groove to be cut in base stone also) using adhesive with drilling holes in base stone and jalli balusters using non corrosive dowel pins) the hole should be filled with non-shrink or a polymer modified thin set grouted mechanically. The stone jali / railings are to be anchored by drilling holes in stones & bottom edge of Jali units. The holes should be slightly larger than the diameter of non-corrosive dowel pin. The dowel pin to be set in base stone using epoxy resin or high strength non shrink grout. Once the pins are set lower the jali unit on to the pins and into the morter/ adhesive bed. The horizontal joint between the Jalis should also be secured using small pins to be used horizontally to connect to adjacent Jalis units or baluster embedded with epoxy. The joint should be filled with as weather resistant non shrink mortar or grout that matches the color of Jaisalmer stone match the natural texture of stone all as specified and directed. Note: (i) Measurement will be taken from top of base stone to bottom of newel cap and gross measurement with post will be taken for all carving areas for payment purpose. (ii) Rates are included base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Sketch-1 of required design enclosed for ready references. (iv) Design and colour of stone shown on sketch for reference only. The same shall be approved by GE before execution of work/order by contractor.

M&L for stone railing/jalli having both side carving of approved design and pattern (Mehrav pattern using yellow Jaisalmer stone) all as for type "A' and Sketch 'A' shown on drawings No. SKETCH/DRG/GE/(AF)/J/01/2021 suitable for flat surfaces, containing base stone 30-40cm wide, 10cm thick, in existing floor after cutting 50mm deep groove of width equal to base stone width and fixed to existing floor using proper adhesive as per manufacture's instructions. The stone railing to be fixed in base stone in groove 50mm deep (groove to be cut in base stone also) using adhesive with drilling holes in base stone and jalli balusters using non corrosive dowel pins) the hole should be filled with non-shrink or a polymer modified thin set grouted mechanically. The stone jali / railings are to be anchored by drilling holes in stones & bottom edge of Jali units. The holes should be slightly larger than the diameter of non-corrosive dowel pin. The dowel pin to be set in base stone using epoxy resin or high strength non shrink grout. Once the pins are set lower the jali unit on to the pins and into the morter/ adhesive bed. The horizontal joint between the Jalis should also be secured using small pins to be used horizontally to connect to adjacent Jalis units or baluster embedded with epoxy. The joint should be filled with as weather resistant non shrink mortar or grout that matches the color of Jaisalmer stone to match the natural texture of stone all as specified and directed. Note :- (i) Measurement will be taken from exposed bottom of base stone to top of highest horizontal member of railing). No deduction for opening area to be made. (ii) Rate includes base stone, newel post, stone railing with all suitable fixing arrangements in position.(iii) Sketch shown on drawing is Schematic only.Detailing/ carving shall be done as per photograph/ image shown on the drawing.

M&L for stone railing of approved design and pattern suitable for slant profile as in stair all as for type 'C' and Sketch 'C' shown on drawings No. SKETCH/DRG/GE/(AF)/J/01/2021 containing base stone 30-40cm wide, 10cm thick fixed in existing floor after cutting 50mm deep groove of width equal to base stone width and fixed to existing floor using proper adhesive as per manufacture's instructions. The stone railing to be fixed in base stone in groove 50mm deep (groove to be cut in base stone also) using adhesive with drilling holes in base stone and jalli balusters using non corrosive dowel pins) the hole should be filled with non-shrink or a polymer modified thin set grouted mechanically. The stone jali / railings are to be anchored by drilling holes in stones & bottom edge of Jali units. The holes should be slightly larger than the diameter of non-corrosive dowel pin. The dowel pin to be set in base stone using epoxy resin or high strength non shrink grout. Once the pins are set lower the jali unit on to the pins and into the morter/ adhesive bed. The horizontal joint between the Jalis should also be secured using small pins to be used horizontally to connect to adjacent Jalis units or baluster embedded with epoxy. The joint should be filled with as weather resistant non shrink mortar or grout that matches the color of Jaisalmer stone to match the natural texture of stone all as specified and directed. Note :- (i) Measurement will be taken along slant/slopping length for paymnet. (ii) Rate includes base stone, newel post, stone railing intermediate post with all suitable fixing arrangements in position.(iii) Sketch shown on drawing is Schematic only.Detailing/ carving shall be done as per photograph/ image shown on the drawing.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M & L Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (20mm garded agge) , exc. 10 cm in width and setting in mortar, complete all as and.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.

M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed.

M&L for Jaisalmer/Jodhpur stone slabs 15 to 20mm thick dressed true and square/rectanguliar tiles of approved sizes as in wall/column claddings/linings jointed and recess pointed in coloured cement mortor 1:6 with and including 15mm thick backing in CM (1:4) fixing with fastener etc complete all as specified and directed.

"V" type stainless steel hinge of size 75mm x125mm x 5mm fixed as in repair complete all as specified and as directed .

300mm long helical door spring mild steel including roller and roller plate complete all as specified and as directed

Supply and fixing in repair 100mm long butt hinges stainless steel medium weight ISI marked.

Supply and fixing in repair 250mm long Stainless steel barrel tower bolt of extrude section ISI marked.

S&F in repair 300mm long stainless steel sliding bolts, with bright bolt not less than 12mm dia all as specified

Easing of Allu doors/window/ventilator shutter any thickness, any size and repair by Pvc rubber beeding, including tightening of hinge screw, by adjusting/tightening of tower bolts, sliding bolts etc and making it fully functional complete.

Easing of wooden doors/windows/ventilator shutters any thickness, any size by planning with plane jack, by tightening of hinge screws, by adjusting/ tightening tower bolts, sliding bolts etc and making it fully functional complete all as specified and directed.

Easing of steel windows/ventilator by adjusting projecting type hinges by hammering, oiling/greasing to hinges, adjusting handles of peg stay, including welding Etc, making the window shutter fully functional complete all as specified and directed

Attending petty complaints of Welding nature such as Welding hinges to iron frame of door and window, welding of wicket gate, welding of holdfast, guide rails,etc all as per directed by Engr-in-charge.

RJS INFRATECH (BID ID -3483264)

M.D. CONSTRUCTION CO. (BID ID -3481655)

M/S MAYA CONSTRUCTION COMPANY (BID ID -3477913)

KHUSBU CONSTRUCTION COMPANY (BID ID -3477978)