SPL REPAIR TO INTERNAL ROAD FROM RAILWAY CROSSING TO ISWAR NAGAR OR MD ACCN UNDER GE (N) MEERUT CANTT

Amount

M&L for 150mm thick (compacted thickness) WBM in two susequent layer, each layer 75mm thick with coarse aggregate of grading 2 (63mm to 40mm size) or grading 3 (50 to 20mm size) spread, rolled with 8 to 10 Ton power roller and consolidated to gradient and camber required with lime stone, sand stone complete all as specified and directed.

M&L for applying evenly apriming/tack coat with paving bitumenous primer Vg 10/Vg 30 @ 10 Kg/10 Sqm for carriage way only complete all as specfied and directed.

M&L for premix bituminous macadam mixed with paving bitumen @ 4% binder (viscosity grade VG-30) contents any penetration laid/rolled and campacted to required gradient and camber (Consolidated thickness not exc 75mm) with 8 to 10 Ton power roller complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bitumenous primer (Paving bitumen Vg-10/30) @ 2.50 Kg/10 Sqm complete all as specfied and directed.

Preparing the black top surface of roads with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming /tack coat with bitumenous primer (Paving bitumen VG-10/30) @ 5 Kg/10 Sqm complete all as specified and directed.

M&L Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder (viscosity grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient and laid with mechanicl paver and rolled to a uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradeint complete all as specified and directed.

S&F in repair Bi-Direxctional Reflective type road sollar studs (125mmx125mmx25mm) illuminated red both sides of rectangular/square shape made out of thermoplastic body fixed on road with bitumen adhesive as per manufacture's instructions having abrasion resistance ceremic coating and reflective surface complete all as specified and directed. Make - 3M, OSCAR or its equivalent as approved by GE.

S&F in repair Cat eyes ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses of temperature resistance body of size 100mm x 90mm x 17mm fixed on road with bituminous adhessive as per manufacturer's instructions having abrasion resistance cereamer coating and reflective surface complete all as specified and directed. Make - 3M, OSCAR or its equivalent as approved by GE.

S&F in repairs long delinator made out of powder coated mild steel body rectangular shape having size 100mmx1100mmx20mm and weight 2 to 3 Kg, wrapped with three nos of high intensity reflection tape in red or yellow or white in colour of 150mm height and 50 micron thickness of each, including necessary paiting, execavation and embedding in PCC (1:2:4) block of size of 250mm x 250mm x 350mm complete all as specified and directed. (As per Sample kept in AGE B/R-II(N) office). Make - 3M, OSCAR or its equivalent as approved by GE.

S&F in repair Long Solar Delinator made out of powder coated medium grade MS pipe 48mm dia, 1.00 Mtr heigh (0.70m above ground level and 0.30m below ground level) reflecting/blinking portion covered with welded mesh of 3mm dia wire and 50mm x 50mm mesh including necessary painting, excavation and embedding in PCC (1:2:4) block size of 250mmx250mmx350mm all complete as specified and directed. Make - 3M, OSCAR or its equivalent as approved by GE.

M&L for cleaning the road surface of dirt, oil, grease and forgin material etc and applying 2.5 mm thick road marking strips(retro reflective) of white/yellow colour using Hot Thermoplastic material by fully/semi autiomitic thermoplastic paint through authorised applicator complete all as specified and directed.

SA construction co.

G. K. CONSTRUCTION

Arun Construction Co.

VIRAT CONSTRUCTIONS

M/S MRIGASYA INFRA