Strengthening of Nathagiri Murugan Grivalam Road Km 0/0-0/160 in Gudalur Panchayat in Vasudevanallur Pt Union

Amount

Picking the existing surface to 50mm to 100mm thick including labour and hire charges for picking tools and plants and all other incidental charges etc complete as per standard specification.

Providing laying and compacting red gravel in accordance with requirements of the specification materials shall be in one or more layers as necessary including watering, consloidating by the power roller rolling and all labour charges for soilling hire charges for consolidation etc. completed

Providing and laying spreading and compacting graded stone aggregate to wet mix macadam Specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick withpavers in sub base / base course on well prepared. etc..

Premeasurement for providing and laying PRIME Coat over the WBM surface using 7.00 kg of bitumens Emulsion SS I for 10 Sqm department at section stores and its cost will be recovered etc…

Premeasurement for Providing and laying TACK COAT over the WBM Surface using 2.50kg Bitumens Emulsion RS I. including cost if Bituminous emulsion which will be supplied by the department at section stores and its cost will be recoverd as per special condition appended including labour charges for preparing the surface for laying tack coat and for applying required quatity of bituminous emulsion by mechanical sprayer hire and fuel charges for all tools and plants emplyed etc,

7BC 25/30/40mm thick(Grade-II) using VG30 Bitumen and plastic waste Providing and laying Bituminous concret to 25/30/400mm thick using 0.13 cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26 cum of 2.36 and below eith 47.28kgs of VG30 bitumen and 3.02 Kgs of waste plastic for premixing per 10sqm including cost and coveyance of all materials etc.,,

Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface apppllied glass beads as per IRC: 35 . The finished surface to be leve, uniform and free from streks and holes etc.,

Karthik (BID ID -1548603)