RequiredOEM Authorization Certificate Bid to RA enabled No Solar Street Lighting And Renewable Energy Street Lighting ( 16 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Confirm to specification As per MNRE specification for Solar Photovoltaic Lighting Systems & Power Packs - White LED (W- LED) Based Solar Street Lighting Systems * Model as per MNRE Specification Mdel II Model I
RequiredMdel II
RequiredModel III
RequiredModel: IV Battery Model III : With Lithium Ferro phosphate Model I: with Lead Acid Battery. Operates from 1/4 battery. Operates from dusk to dawn at full brightness dusk to dawn at full brightness
RequiredModel II:with Lead Acid Battery. Operates from dusk to dawn ( first four hours at full brightness & rest of the time at lower light level
Requiredwith motion sensor)
RequiredModel III : With Lithium Ferro phosphate battery. Operates from dusk to dawn at full brightness
RequiredModel IV : With Lithium Ferro phosphate battery. Operates from dusk to dawn ( first four hours at full brightness & rest of the time at lower level
Requiredwith motion sensor) Colour temperature of White - LED (deg K) 5500 deg K to 6500 deg K * PV module (Wp) under STC (Wp) Model IV: 30 Model I: 40
RequiredModel II: 30
RequiredModel III: 40
RequiredModel IV: 30 Battery capacity ( 12V-AH @ C/10) to be selected as per model in line with MNRE specification for guidelines 120WAh 20 AH
Required40 AH
Required120WAh
Required160 Wah Scope of supply with errection and commissioning at consignee end with errection and commissioning at consignee end
Requiredwithout errection and commissioning CONSTRUCTIONAL Autonomy For Model II: 3 days or minimum 42operating hours per permissible discharge * Type of Light source White light emitting diode (W-LED) * Light output (Lux) Must declare as per MNRE specification - * Duty cycle Dusk to dawn as per MNRE * PV module chemistry Crystalline silicon solar cells * 2/4 PV module efficiency (%) >/= 12 * No load current consumption (mA) Must declare (not more than 20 mA) </=20 mA * Necessary cables and connectors as part of supply of lighting system Yes * CERTIFICATIONS Battery Type
Requiredmake and model - * PV module certification For humidity
Requiredfreeze and damp heat tests certificate conforming to IEC 61215 Edition II BIS 14286 from an NABL or IECQ accredited laboratory * Warranty for street lighting system including battery (Years) >/=5 * Warranty for Pv module (Years) >/= 25 * Availability of test reports from Central Government or NABL or ILAC accredited Lab covering all the parameters as per MNRE specification Yes * Test Report No. - * Test Report date - * Name of Test lab - * Address of the Test lab - * Make Model Number Country of origin and technical charecteristics (including IESNA LM -80 report) of W -LED - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.