Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.8 L
EMD Value
₹14,000
Closing Date
3 Dec 2025, 5:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER TISSA DIVISION HPPWD TISSA
EXECUTIVE ENGINEER TISSA DIVISION HPPWD TISSA
Providing R/wall at Rd 3/645 to 3/650,3/695 to 3/700 and 3/745 to 3/755) (Under PDNA-2023)
2025_PWD_122037_19
TISSA TENDER
Open Tender
Civil Works
Percentage
90 days
TISSA
Please refer Tender documents.
5 documents required · 5 mandatory
₹350
₹14,000
3 Dec 2025
28 Nov 2025
3 Dec 2025
28 Nov 2025
3 Dec 2025
28 Nov 2025
Demolishing cement concrete manually/by mechanical means nominal size 1:3:6 and including equivalent design mix for retrofit wall disposal of meterial within all lead as per dirction of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.
Dismantling old plaster of skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.
Reinforeced cement concrete work in walls (any thickness), inluding attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struct etc. above plinth level up to floor five level, excluding cost of centering, shutering finshing and reinforcement.as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights / depths of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation Footings, basis of columns etcetra and mass concrete including entire carriage of materials with in all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in column, pillars, piers, abutments, posts and struts in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.
Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heighths of propping and centring below supporting floor to ceiling upto any heights and removal of the same fro insitu-reinforced concrete and plain concrete work in walls any thickness including attahced pilasters, buttresses, plinth and string course etc. in all heights as directed by the Engineer-in-charge including carriage of material in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
Providing and laying tor Steel reinforcement Thermo-Mechanically Treated bars of Tata, Tiscon/sail of grade Fe-500D or more for Reinforced cement concrete work including straightening, cutting, bending, placing in position complete including cost of binding wires complete upto all floor level as per HPPWD specifications, approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/subway and bridge deck etc., prepared by mixing in the ratio of 5: 2 (5 parts integral crystalline slurry: 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry: 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.
20 mm ( twenty millimetre) thick cement plaster in single coat on the fair side of brick /concrete/stone / walls for interior plastering upto floor all level including arrises internal rounded angles, chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 ( one cement isto four sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.
Steel work of (Tata / Sail) riveted, bolted or welded work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per PWD specification, approved drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge.The rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the Government.
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note:Measurement and payment: The pre measurement asurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqm of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Finishing walls with two or more coats of weather proof exterior and interiors grade emulsion of approved shade at the rate of 1.67 ltr. (one decimal six seven litres) per 10 sqm. (ten square metre) over and including priming coat of exterior primer applied at the rate 2.20 Kg. (two decimal two kilogram) per 10 sqm. (ten square metre) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and painting two or more coats on wood work with Deluxe Multi Surface Synthetic enamel Paint of Asian / Nerolac required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seventy five litre per ten square meter) of approved brand and manufacture complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honeycom area of cocrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete. The payment shall be made on Stirreer mixed acrlyic polymer of approved make @2% of weight of cement used) modified cement slurry made with non shrink compound in concrete/RCC work in crack lenth as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing 6mm thick (six millimetre) plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.
Electrical fitting as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.47 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.94 MB
DNIT.pdf
Tender Documents • 18.12 MB
BOQ_179068.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .