Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.6 L
Closing Date
8 Oct 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
W2
17 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Balance Sheet and all other Financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference.
As Per Clause No. 10 of IR GCC-2022, For participating in tender,The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(A)Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (B) Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (C) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender).
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering work.
10 conditions · 4 needing a document upload
Experience, financial status and ability: Tenderer is required to submit documents detailed here under for evaluation of his credentials.
Employment/Partnership etc. of Retired Railway Employees.:- The tenderer has to give required information regarding association of Retired Railway Employees either as Employee or Partnership etc. in the per-forma as enclosed Annexure-I to this chapter of this tender document as per clause No. 16(a) of IR GCC-2022.
List of works completed & in hand: Tenderer is required to submit, along with his tender, particulars of all works completed by him including works in hand for the Railways or for any other client in the Per-forma enclosed as Annexure-II to this chapter of this tender document. Figures of cost shall not include cost of materials supplied free of cost by the client to the contractor. The tender without this information may be treated as if the tenderer has no works in hand. Supportive documents from the organizations with which the tenderer is workings should be enclosed giving description of work, contract value, date of award, approximate date value of balance work.
List of court cases and arbitration cases: Tenderer is also required to submit, along with his tender, list of arbitration's demanded from any clients during the last five years preceding the date of opening of this tender as per Annexure-III/A to this chapter of this tender document. The tenderer is also required to submit, along with his tender, list of court cases filed against any clients during the last five years preceding the date of opening of this tender as per Annexure-III/B to this chapter of this tender document.
List of plant and machinery: Tenderer has to make his own arrangements for execution of works. The tenderer is required to submit, along with his tender, list of plant and machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work in Proforma given in Annexure-IV to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no plant and machinery available on hand (own) and that no plant and machinery are proposed to be inducted for the subject work.
List of personnel and organization: Tenderer is required to submit, along with his tender, list of Personnel and organization available on hand (own) and proposed to be engaged for the subject work in Proforma given in Annexure-V to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no personnel and organization and that no personnel and organization are proposed to be engaged for the subject work.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per clause no. 14 of GCC-2022, The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (A)HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (B)Partnership Firm: (i)A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (C)Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (D)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E)Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society.
Undertaking:- An undertaking regarding not blacklisted or debarred by Railway or any other Ministry/Department of the Govt. of India from participation in tender/contracts on date of opening of bids to be submitted by all partner/member in case of partnership firm/LLP as per clause 14 of GCC 2022. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
As per clause No. 15 of GCC-2022, The tenderer whether sole proprietor / a company or a partnership firm /registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.
Special Repairs to Service Building and Platform at Various Station in the Jurisdiction of ADEN/NKE.
TC-134-2026-SPJ~ECR
TC-134-2026-SPJ
Open
Works - General
9 Months
Samastipur, Bihar
₹0
₹3.6 L
14 Sept 2026
14 Sept 2026
24 Sept 2026
74 items across 1 schedule · ₹1,54,50,076.88 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 350 | 177.5 | 62,125 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 172 | 2,123.75 | 3,65,285 |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 6000 | 17.6 | 1,05,600 |
| 4 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 6000 | 8.95 | 53,700 |
| 5 | Beyond 30 cm girth upto and including 60 cm girth | Each | 50 | 532.35 | 26,617.5 |
| 6 | Beyond 60 cm girth upto and including 120 cm girth | Each | 40 | 2,373.5 | 94,940 |
| 7 | Beyond 120 cm girth upto and including 240 cm girth | Each | 40 | 11,020.15 | 4,40,806 |
| 8 | Above 240 cm girth | Each | 5 | 22,075.2 | 1,10,376 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 25 | 9,045.75 | 2,26,143.75 |
| 10 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 280 | 736.4 | 2,06,192 |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 400 | 961.3 | 3,84,520 |
| 12 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 3000 | 107.85 | 3,23,550 |
| 13 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 80 | 9,105.95 | 7,28,476 |
| 14 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 100 | 905.05 | 90,505 |
| 15 | Area of slab over 0.50 sqm | Sqm | 90 | 5,136.3 | 4,62,267 |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 180 | 1,267.95 | 2,28,231 |
| 17 | Kiln seasoned and chemically treated hollock wood | cum | 1.5 | 83,378.05 | 1,25,067.08 |
| 18 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 50 | 3,167.95 | 1,58,397.5 |
| 19 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 2500 | 238.35 | 5,95,875 |
| 20 | With 2nd class teak wood beading 62X19 mm | Sqm | 100 | 1,308.35 | 1,30,835 |
| 21 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 60 | 228.85 | 13,731 |
| 22 | 100x58x1.90 mm | Each | 100 | 45 | 4,500 |
| 23 | 250x16 mm | Each | 150 | 193.7 | 29,055 |
| 24 | 200x10 mm | Each | 100 | 99.7 | 9,970 |
| 25 | 125 mm | Each | 100 | 66.25 | 6,625 |
| 26 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 100 | 492.7 | 49,270 |
| 27 | 30 mm thick plain PVC door shutters | Sqm | 80 | 3,182.95 | 2,54,636 |
| 28 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 100 | 8,595.15 | 8,59,515 |
| 29 | Light shade pigment using white cement | Sqm | 600 | 1,402 | 8,41,200 |
| 30 | 25 mm thick | Sqm | 300 | 1,948.25 | 5,84,475 |
| 31 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 200 | 1,112.7 | 2,22,540 |
| 32 | Size of Tile 600x600 mm | Sqm | 300 | 1,553.45 | 4,66,035 |
| 33 | 110 mm diameter | Metre | 500 | 377.4 | 1,88,700 |
| 34 | 110 mm | Each | 100 | 136.15 | 13,615 |
| 35 | 110 mm bend | Each | 50 | 150.35 | 7,517.5 |
| 36 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 100 | 738.65 | 73,865 |
| 37 | 1:6 (1 cement: 6 fine sand) | Sqm | 1000 | 333.35 | 3,33,350 |
| 38 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 3500 | 185.65 | 6,49,775 |
| 39 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 4000 | 193.7 | 7,74,800 |
| 40 | Two or more coats on new work | Sqm | 2500 | 146.8 | 3,67,000 |
| 41 | Lettering with black Japan paint of approved brand and manufacture | per letter per cm height | 15000 | 6.15 | 92,250 |
| 42 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 3000 | 156.05 | 4,68,150 |
| 43 | One or more coats on old work | Sqm | 598 | 102.8 | 61,474.4 |
| 44 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | Sqm | 100 | 1,090.65 | 1,09,065 |
| 45 | 3 mm thick | Sqm | 300 | 560.95 | 1,68,285 |
| 46 | Of area 3 sq. metres and below | Each | 100 | 367.2 | 36,720 |
| 47 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 1500 | 54.65 | 81,975 |
| 48 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 400 | 263.95 | 1,05,580 |
| 49 | 90 mm to 45 mm size stone aggregate | cum | 30 | 2,098.4 | 62,952 |
| 50 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . | cum | 50 | 1,046.95 | 52,347.5 |
| 51 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Sqm | 500 | 644.05 | 3,22,025 |
| 52 | Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete.. | Sqm | 200 | 130.85 | 26,170 |
| 53 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 150 | 7,993.8 | 11,99,070 |
| 54 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 15 | 6,767.4 | 1,01,511 |
| 55 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 20 | 2,648.85 | 52,977 |
| 56 | 10 litre capacity - White | Each | 20 | 1,190.65 | 23,813 |
| 57 | 15 mm nominal dia Pipes | Metre | 300 | 286.8 | 86,040 |
| 58 | 25 mm nominal dia Pipes | Metre | 100 | 401.55 | 40,155 |
| 59 | 50 mm nominal dia Pipes | Metre | 60 | 934.15 | 56,049 |
| 60 | Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. | Metre | 100 | 960.3 | 96,030 |
| 61 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. | Metre | 1600 | 546 | 8,73,600 |
| 62 | Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. | Each | 30 | 1,321.65 | 39,649.5 |
| 63 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 15000 | 11 | 1,65,000 |
| 64 | 15 mm nominal bore, 90 mm long, weighing not less than 93 gms | Each | 110 | 196.75 | 21,642.5 |
| 65 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 69 | 118.5 | 8,176.5 |
| 66 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms | Each | 22 | 208.45 | 4,585.9 |
| 67 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms | Each | 18 | 523.8 | 9,428.4 |
| 68 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 21 | 156.9 | 3,294.9 |
| 69 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 7 | 121.4 | 849.8 |
| 70 | 300 mm dia piles | Metre | 70 | 3,065.6 | 2,14,592 |
| 71 | 300 mm dia | Metre | 81 | 707.75 | 57,327.75 |
| 72 | 200 mm nominal size dia | Metre | 70 | 1,113.35 | 77,934.5 |
| 73 | 200 mm nominal size dia | Metre | 25 | 1,255.7 | 31,392.5 |
| 74 | Providing and fixing 15 mm thick false ceiling t i l e s at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge. | Sqm | 17 | 1,781.2 | 30,280.4 |
| Schedule total | ₹1,54,50,076.88 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREItoVforIREPS_2.pdf
ATTACHMENT
JPOCircular.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
Annexure-VIA.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .