Renewal of metalled road on left bank of Dariyabad Branch from Km 60.250 to 60.565 and from Km 63.580 to 63.930

Amount

cleaning of thick jungle and thorny bushes without uprooting.

Providing, laying, spreading and compacting stone aggregates of 45-63 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical specification clause 405

Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical specification clause 405

Providing and appling primer coat with bitumem emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per MORD technical specification clause 502 and direction of EIC

Providing and appling tack coat with bitumen VG-30 using bitumen pressor sprayer at the rate of 0.35 kg per sqm on the prepared bituminous/granular surface treated with primer or previously painted surface and cleaned with hydraulic broom. as per MORD technical specification clause 502 and direction of EIC

Providing, laying and rolling of open-graded premix carpet of 20 mm thick (compacted) composed of 13.2 mm to 5.6 mm aggregates of approved quarry using bitumen (VG-30) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant , laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat Type C as per MORD Technical Specification Clause 508 and direction of Engineer-in-charge .

Providing and Laying seal coat sealing the voids in a bituminous surface to the specified levels grade and cross fall using type c as per MORD technical specification clause 510 and direction of EIC

Earth work in shoulders inner and outer slope of bank with approved material with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement with lead upto 50m

M/S J AND V INFRATECH PRIVATE LIMITED (BID ID -4656767)