PERIODICAL SERVICES TO OFFICER MD ACCN AND MISC AT SEC B AT PATIALA UNDER GE(SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement plaster of any description, any thickness from external/internal surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 15mm thick in cemet mortar 1:4 including with or without mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished fair & even complete all as specified and as directed. Note : WPC will be measured and paid separately.

Supply only integral water proofing compound complete all as specified & as directed.

M&L for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and chajjas and applying two coat of modified acrylic smooth emulsion exterior grade with silicon having anti- algal and dust pickup resistance properties, material should be applied (Dilution,Recoacting periods etc ) as per manufacturer instructions by using fully automatic air less spray machine having flow of minimum 1 ltr per minute and pressure of 3300PSI (Ace Suprema) complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004 Alkali and fungal resistance dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/ 10 sqm over and incl priming coat of exterior applied @ .9ltr/10 sqm over new surfaces complete all as specified and directed.

M&L for prepration and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for applying acrylic thick wall care putty on internall surfaces of walls/ceilings/soffits(thickness 1 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. NOTE :- The work pertaining to repairs of Chajjas, balconies and other ceiling surfaces is to be carried upto a height of 12m ie in the buildings upto three storey. The contractor shall ascertain the quantum of various items at different heights from the site executives before quoting their rates in the BOQs. No claim whatsoever regarding scaffolding/ Ladders etc required for carrying out works shall be entertained at a lator stage.

M& L For Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. NOTE :- The rates quoted shall be incusive of welding of steel bars for enlarging the length of existing Steel Reinforcement.

M & L For Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. NOTE :- The rates quoted shall be incusive of welding of steel bars for enlarging the length of existing Steel Reinforcement.

M&L for Reinforced cement concrete 1:1.5:3 nominal Mix, using 20mm graded stone aggregates as in Chajja/Parapet wall/facias/staircase/railings etc complete all as specified and as directed.

M&L for Formwork to faces of walls, facias, parapets, staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items incuding edges complete all as specified and directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane as in repair complete all as specified and directed..

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in spare exceeding 0.5 sqm in each pane as in repair complete all as specified and directed.

'Notes: Applicable to (item No 02 to 16) 1. Please note that 100% of the total material required against the subject work must be deposited with the concerned JE within 15 days from the date of commencement of work and payment for the same shall not be released against material lying at site. The conditions of IAFW-2249 (General Conditions of Contracts) may be amended accordingly, 2. If Contractor fails to deposit the material as mentioned at note No 1 above, he shall be liable to pay compensation @ Rs. 1000/- per day (subject to max Rs. 90,000/-) 3. The items of Plastering/ Rendering, putty and further finishes shall be got executed in Stage wise manner (as mentioned below). After completion of every stage contractor will submit the stage passing certificate duly sign by all concerned as per format given in Appx ‘A’ after Schedule 'A' Notes. (a) Stage –I : Plastering / rendering. (b) Stage – II : Putty work. (c) Stage – III : First coat of finishes. (d) Stage- IV : Second coat of finishes. 4. Please note no further stage shall be executed till the certificate is submited to the GE.

SWAMI ENGINEERS (BID ID -3305812)

Jawandha Enterprises (BID ID -3316502)

m/s panchmukhi builders (BID ID -3310020)

Arneja Builders (BID ID -3305420)