84145/E8 PROVN OF WORK SERVICES FOR POL STORE AT AF JORHAT UNDER GE (AF) JORHAT

SCHEDULE 'A' PART-I : BUILDING WORKS Lump Sum Priced worked out by the Contractor for BUILDING WORKS as Listed in SCHEDULE 'A' PART-I of Rs. 3,30,000.00 inserted by MES at SERIAL PAGE No._17_.

SCHEDULE 'A' PART-II : EARTH WORKS Lump Sum Priced worked out by the Contractor for EARTH WORKS as Listed in SCHEDULE 'A' PART-II of Rs. 41,971.04 inserted by MES at SERIAL PAGE No._18_.

SCHEDULE 'A' PART-III : INTERNAL ELECTRIFICATIONS Lump Sum Priced worked out by the Contractor for INTERNAL ELECTRIFICA-TIONS as Listed in SCHEDULE 'A' PART-IV of Rs. 59,785.98 inserted by MES at SERIAL PAGE No._19_.

SCHEDULE 'A' PART-IV : ROADS & PATHS Lump Sum Priced worked out by the Contractor for ROADS & PATHS as Listed in SCHEDULE 'A' PART-IV of Rs. 1,32,544.28 inserted by MES at SERIAL PAGE No._20_.

INTERNAL ELECTRIFICATIONS S&F Flame Proof Exhaust Fan 450mm Sweep with Louvers, Single Phase with Fixing Arrangement using Fastener, Providing Electric Connection with and including Copper Conductor Cable of suitable Size and Length, 3 Core, complete all as specified and as directed. NOTE : Cost of Cutting/ Making Hole in Brick Walls built in Cement Mortar to suitable Size for Fixing of Exhaust Fan 450mm Sweep with Frame and Making Good in Cement Mortar 1:3 or Cement Concrete 1:2:4 (20mm graded stone aggregate) as required will deem to be included under respective Item of SCHEDULE 'A' PART-I.

S&F Flame Proof Distribution Board 8-way, SPN, Weather Proof, Single Phase with Bus-bar in Cast Aluminium LM-6 Enclouser operated Externally Spring type Knob Complete with M-25 Cable Entry to suit Incomming Cable and 02 No. M-20 Cable Entries for Out-going Cable from bottom with Cable Glands suitable for Hazardous Area and Conforming to IS:2147/62 Neoprene Gasket, Degree of Protection IP-65, including Flame Proof Incomming 01 No. MCB 32 Amp, Double Pole (DP) and 06 No. Out-going MCB 6 Amp to 32 Amp, Single Pole (SP), fixed Flush with Wall inside the Niches or Outside on Wall Surface and Connecting up, complete all as specified and as directed.

M&L Earthing Complete with Galvanised Steel Earth Platte Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded broken stone aggregates) and Pre-cast RCC Cover Slab of Size 450x450x50mm in Cement Concrete 1:2:4 (20mm graded broken stone aggregates), Reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, Mild Steel Round Bar 12mm dia Handle (01 No.), GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) 'Medium grade' including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of Surplus Spoil upto a distance of 50 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed. NOTE : Cost of necessary Earth Works, Cement Concrete Works, etc. will deem to be included in the Quoted Unit Rate.