SITC 3hp Openwell pumpset, repairs to C light at Tirumalgherry S/Qtrs.

Amount

Supplying, Installing, Testing and Commissioning of following rating mono submersible type pump, suitable for operation on 3 phase, 415volts, 50Hz AC supply etc., as required (a) 3HP, 3 phase. M/s Kirloskar JOS-335

Supplying and fixing of the following accessories etc.,as required. (a) 40mm dia CPVC pipe

(b) 40mm dia brass NRV

(c) 40mm dia CPVC MABT

(d) 40mm dia CPVC Bend

(e) 40mm dia CPVC Union

(f) 25mm dia CPVC ball valve

(g) 40/25mm dia CPVC 'T'

(h) 40 mm GI Nipple (6" long)

Supplying and fixing of electronic starter with controls viz., time delay, dry run protection, overload relay, MCB, display of voltage and current etc, suitable for following rating motors etc, as required. (make: GELCO DCP 3.4 DAF / OCLEG / SS) (a) 3HP, 3phase.

Supplying and Laying of 3C 4.0 sq mm Flat submercible Pump copper Conductor cable etc. as required.

Providing repairs to compound lights by replacing the following accessories i/c removing of faulty, including interconnections etc., as required. (a) 30W LED street light fitting (Make: CG / SS)

Supplying and laying of 2 core 1.5 sq.mm, PVC sheathed PVC insulated armoured copper cable, along with earth wire 14 SWG GI wire from pole box to pole box loop and circuits.

weather proof pole box along with 6A connector and 6A SP MCB (Make: syntex or SS)

Supplying and fixing of 25mm dia GI bracket, of length 1.0mtrs bent at suitable angle for mounting the LED type fitting including fixing the bracket on the surface of wall, etc as required.

Supplying and fixing of suitable size MS clamp for mounting the pole box on the surface, made of MS angle of size 25mm x 25mm x 4mm thick including cutting, welding, painting, with approved colour paint making good the damages done etc., as required.

Supplying and fixing of 3 kW Timer for switch "ON" & "OFF" of the compound lighting (2 circuits) i/c interconnections, testing etc., as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit includingdismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 2 x 1.5 sq. mm

(b) 4 x 1.5 sq. mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (a) 2 way 5/6 amps switch

Supplying and fixing of bulk head type of fitting suitable for operation on 230volts single phase, 50Hz AC supply including supplying and fixing of 25watts LED type bulb etc as required.

Supplying and fixing of 2' 10W LED fitting suitable for operation on 240V, 50HZ AC supply including interconnection, testing etc., as reqd. (M/s CG or ss make)

S/F of 5 amps to 32amps rating 240/415Volts, "C" Curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc., as required.(Make: Havells / Indokopp /MDS Legrand/other BSNL approved make) (a) 6A SP MCB

(b) 32A SPN Isolator

Supplying and laying of PVC insulated and PVC sheathed aluminium armoured power cable suitable for operation on 415volts 50Hz AC supply of 1.1kv grade, of sie 3.5x50 Sqmm etc as required.

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 3½ X 120 sq. mm

Dismantling of old feeder pillar box removing all the rusted angle iron structure handing over the same to the site incharge, removing of existing power cables from soil by digging and making feasible to connect to new feeder pillar box etc as required.

Supplying and fixing of out door type feeder pillar box made of 16SWG MS sheet, double door type, including cutting welding painting with red oxide and powder coating with approved colour paint, the panel should have rain canopy and extended shade to avoid rain water splash inside the panel, providing rubber beading to make it water and dust proof with the following switch gear, etc as required. (a) 400A, 50KA MCCB 4P L&T DU400N Relay 320-400 - 1No. (b) 100A, 50KA MCCB 3P L&T DU100H Relay 80-100 - 8Nos.

Supplying and fixing of 18/20W LED Patti type light fitting for fixing on wall/ceiling suitable for operation on 240V, 50Hz, AC supply including interconnections, testing etc., as reqd. M/s Philips, CG, Wipro or SS make

Supplying and fixing of following Electrical accessories in the existing Switch board/DB Suitable for 415/240 V,50 HZ AC supply i/c removing of old, interconnections etc., complete as required. (a) 10A 1 way Modular Switch M/s Anchor Roma or SS make

(b) 10A 5Pin Modular Socket M/s Anchor Roma or SS make

(c) Stepped Fan Modular Regulator M/s Anchor Roma (2 switch width) or SS make

(d) 3 module ceiling rose

Suppying and fixing 48" dia sweep ceiling fans including interconnections, testing, removing of faulty etc., as required.

Providing Wheel Self Supporting Extension Industrial Aluminium Ladder heavy duty type 20ft height for repair of compound lights in various quarters.

P KISHAN RAO