GE (N) P/TOKEN- 39 OF 2025-2026 REPAIR/MAINTENANCE TO PUMP HOUSE PANEL BOARDS, INCLUDING REPLAC OF STAR DELTA/DOL STARTERS CONTACTORS SINGLE PHASE PREVENTERS REPLA OF PANEL BOARDS METERS ALLIED ITEMS IN THE AREA OF AGE E/M (N) UNDER GE(N) PUNE

Amount

Excavation in trenches not exc. 1.5 Mtrs wide and not exc. 1.5 mtr deep and getting out in hard / dense soil complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing of surplus excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supplying and fix in repairs Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigments complete all as specified and as directed. by Engineer-in-charge.

M&L for shingles/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammped including watering complete all as specified and directed.

Taking up and refixing carefully paver blocks of any size and shape required to be displaced for excavation purpose of the cable lines including the sand/red bajri/shingles beneath the same and consolidating the same after refiling of the earth complete all as specified and as directed. by Engineer-in-charge.

Material and labour for cutting existing road/hard standing for taking out cable /making new connection and making good with PCC (1:2:4) type C 1 (using 20 mm graded broken stone aggregate) surface finished even and fair complete all as directed and specified by Engineer-in-charge.

Taking up/down of faulty LT under ground cable of any size and any capacity from trenches / pole / wall etc for detecting fault including repair and jointing at site including relaying at the same/other location with necessary glands, lugs etc complete all as directed and specified by Engineer-in-charge. Note: Excavation /earth work and cable jointing kit shall be measured and paid for separately under relevent item schedule.

S & F double wall corrugated high density polymer ethyl ( HDPE) pipe for laying of electric cable of 63 mm outer dia and 51 mm inner dia with conforming to IS- 14930 - 1 and 2, PE 63 of pressure rate 4 Kg/sq.cm laid in trenches ,wall, floor,pole including bends, sockets and other connected accessories complete all as directed and specified by Engineer-in-charge. Make:Dura Line/Tijaria/REX/Astral

Supply and Laying 40 mm outer dia double walled corrugated (DWC) HDPE duct Pipe conforming to IS- 14930 - 1 and 2, PE 63 of pressure rate 4 Kg/sq.cm with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection all as directed and specified by Engineer-in-charge. Make:Dura Line/Tijaria/REX/Astral

S & F flexible GI conduit in repairs alongwith taking up the required cables and refixing having bore of dia 25 mm and connecting the same with necessary and suitable glands complete all as specified and as directed. by Engineer-In- charge

Supply and fix in repairs heat shrinkable LT straight through Joints of following specifications:-

3-1/2 core 10-16 sq mm Make: 3M,Denson,Raychem

3-1/2 core 25-35 sq mm Make: 3M,Denson,Raychem

Supply and lowering in repairs SUBMERSIBLE Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable copper conductor mutistraned cable of size 3 core x 2.5 Sq mm for Submersible Pump Motor with necessary connections from Motor to starter complete with nessesary thimbles etc.complete all as specified and as directed. Make:Anchor ,Havells,Finolex

Supply and lowering in repairs SUBMERSIBLE Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable copper conductor mutistraned cable of size 3 core x 4 Sq mm for Submersible Pump Motor with necessary connections from Motor to starter complete with nessesary thimbles etc. complete all as specified and as directedMake:Anchor ,Havells,Finolex

Supply and lowering in repairs SUBMERSIBLE Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable copper conductor mutistraned cable of size 3 core x 6 Sq mm for Submersible Pump Motor with necessary connections from Motor to starter complete with nessesary thimbles etc. complete all as specified and as directedMake:Anchor ,Havells,Finolex

Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of following sizes including removal old existing unserviceable one complete all as specified and as directed.Make:Anchor ,Havells,Finolex

Supply and laying in replacement LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip armoured electric power cable / LT Panels heavy duty with stranded Aluminium Conductor 1100 Volt grade, laid in trenches/ surface of Wall/in GI Pipe along with Pole for connection to OH Lines/LT panels including removal of old cable, fixing of new brass cable glands etc and testing for following sizes, complete all as specified and as directed. Note : Earthworks etc. will be measured and paid under appropriate Items. Make:anchor,Havells,Cable Corporation Of India

4 core x 16 Sqmm.

4 core x 25 Sqmm.

3.5 core x 35 Sqmm.

M&L for Servicing / testing of LT Distribution Panels / feeder pillar boxes ,03 Phase , 430 Volts , all as specified and as directed .

(I) Repair/ replacement of damaged hinges of each compartment

(ii) Cleaning of existing bus bars with CTC applying with red solution, providing bus bar insulation and re fixing with new nuts, bolts, washers etc.,

(iii) Replacement of damaged copper flexible cable and fixing new copper flexible cable for incoming and outgoing connections of each MCCB/switches terminals to bus bars

(iv) Replacement of damaged/ worn out cable lugs any made / size for incoming & outgoing cables

(v) Replacement of neoprene gasket for all doors of panel board.

Supply and replacement wall mounted Water Level Indicator, Overhead Tank Indicator, Led Indicator for Tank Water, Water Level Display with Wired Sensor Security System and water level indicator cum controller device for OH resevoir tank of 30 Mtr stagging showing not less than 4 stage of water storage with necessary multi standard copper conductor cable not less than 6 core alongwith water level sensor including removal of old unsv one complete all as specified and as directed. Make:Autocon,Powertek,Spillguard Automation

Supply and replacement wall mounted Water Level Indicator, Overhead Tank Indicator, Led Indicator for Tank Water, Water Level Display with Wired Sensor Security System and water level indicator cum controller device for OH resevoir tank of 30 Mtr stagging showing not less than 4 stage of water storage with necessary multi standard copper conductor cable not less than 6 core alongwith water level sensor including removal of old unsv one complete all as specified and as directed. Make:Autocon,Powertek,Spillguard Automation

Supply and fix in repairs 16 core 1sqmm PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 for water level sensorMake:Anchor ,Havells,Finolex Note: The Job involves suspending the same from RCC overhead tanks with maximum height of 30 mtrs

M & L for Relaying and joining of existing 16 core cable using proper jointing with copper ferrules. Note:- The Job included the M & L for joint to be used. Note: The Job involves suspending the same from RCC overhead tanks with maximum height of 30 mtrs

S & F in repairs sensor for water level indicators in RCC overhead tanks of 30 Mtr stagging and UG Sumps situated in water supply installation all over the area Make:Autocon,Powertek,Spillguard Automation

Supply and lay in repairs 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV of following sizes fixed complete to walls, ceilings or in floors,laid in trenches etc. with all fitting such as tee, bends, union, elbow reducer, pasting adhesive materials etc with 25 mm outer dia of pipe Make:Reliance,Kisan,SFMC

Demolition of old u/s Brickwork or stone/boulder masonry but built in cement mortar or cement lime mortar complete all as specified and as directed

Taking down cement plaster of any thickness and removing from site to a distnace exc 50 metre but not exc. 100 metre complete all as specified and as directed

M&L for brick masonry with fly ash bricks exc 6 meter mean radius in cement mortar 1:6 complete all as specified and as directed

M&L for rendering with 15mm thick in cement mortar 1:4 on fair surfaces of brick or concrete surafaces finshed even and smooth surfaces without using extra cement and complete all as specified and as directed by Engr-In-Charge.

Material and labour for attending the emergent complaint and repairs to centrifugal monoblock pumpset of 3 HP to 25 HP including carrying out minor repairs etc as required to make the system in order/ functional and necessary gland,rubber sheet ,nut , bolts , washers and phase sequence change , electric supply connections from switchgear/starter/Panel etc. all as diected by Engineer-in-charge

Material and labour for attending the emergent complaint and repairs to centrifugal inline booster/lifting pumps of 0.25 HP to 1 HP including carrying out minor repairs etc as required to make the system in order/ functional and necessary gland,rubber sheet ,nut , bolts , washers and auto/manual reset , electric supply connections from switchgear/starter/Panel etc. all as diected by Engineer-in-charge

Material and labour for attending the emergent complaint and repairs to centrifugal borewell/openwell pumpsets of 0.5 HP to 5 HP including carrying out minor repairs etc as required to make the system in order/ functional and necessary gland,rubber sheet ,nut , bolts , washers and phase sequence change , electric supply connections from switchgear/starter/Panel etc. all as diected by Engineer-in-charge

M & L for rewiring of the control wiring of single phase DOL starters by connecting existing MCB's,thermal overload relays, contactors etc. using FRLS single core bright annealed multistranded 1.5 sq mm copper wire with necessary accessories such as PVC tags, thimbles,cable worms,PVC cable trays etc.Make Of cable: Make:Anchor ,Havells,Finolex

M & L for rewiring of the control wiring of three phase DOL starters by connecting existing MCB's,thermal overload relays, contactors etc. using FRLS single core bright annealed multistranded 1.5 sq mm copper wire with necessary accessories such as PVC tags, thimbles,cable worms,PVC cable trays etc.Make Of cable: Make:Anchor ,Havells,Finolex

M & L for rewiring of the control wiring of three phase star-delta starters by connecting existing MCB's,thermal overload relays, contactors, timers etc. using FRLS single core bright annealed multistranded 1.5 sq mm copper wire with necessary accessories such as PVC tags, thimbles,cable worms,PVC cable trays etc.Make Of cable: Make:Anchor ,Havells,Finolex

Supply and replacement single phase preventer having capability to sense single phasing, reverse phasing, unbalanced supply with Auto reset, 1 NO output contact Suitable for any HP/kW rating monoblock pumps Pre-wired terminals for easy connectionscomplete all as specified and as directed. Make Minilec VSP3, GIC L & T,Selec 800 PSR

S & F in repairs LCD Multifunction Meters Input voltage measurement range 3 x 240 VAC (-30% to 20%), Aux supply 90-300 VAC/DC,Flush mounting 96 x 96 mm ,CT/PT site Programmable having accuracy class 1.0 with RS485 port Parameters: V, A, F, PF, kW, kWh with new CT's-01 No.s Make L&T WL440511OOOO, IMP, Automatic Electric

Supply and replacement only LED indicator lamps R,Y,B,G,W with holder 16 mm screw type including removal of existing unserviceable one complete all as specified and as directed by Engg-in- charge.Make:Make L&T, IMP, Automatic Electric

S & F in repairs flush actuator buttons with inbuilt contacts arrangement Contact rating 6A @ 240AC of any desired colour at site.Make: L & T, GE, siemens

S & F in repairs MS/GI hinges by welding/rivetting with existing panel having dia 8 mm to 12 mm and painting the same with existing colour and matching with the same

M & L for fixing fabricated with dust and weather proof CRCA sheet of 2 mm thick as per IS powder coated MS sheet LT outdoor panel cover with necessary neoprene gasket,locking and hanging arrangement with existing panel board

S & F in repairs panel locks of existing type with necessary keys etc

Labour for shifting indoor/outdoor Lt panel from one place to another by demolition of grouting PCC at first place and installing the same with brick/PCC masonary pillar in CM 1:6, plastering 1:4, 10mm thick with clearance atleast 0.4 m above the ground level connecting and disconnecting the associated cable with proper glands , nut ,bolts,washers and thimbles etc.

S & F in repairs following panel accessories with capacity and size Confirming to IS / IEC 60947-4-1 & IEC 60947-4-1:-

3 Pole contactor 415 Volt 50 Hz coil AC-3 rating 9 Amps including auxillary No/NC add on blocks Make L &T Model MNX 9 cat No.CS94106/7 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

3 Pole contactor 415 Volt 50 Hz coil AC-3 rating 12 Amps including auxillary No/NC add on blocks Make L &T Model MNX 12 cat No.CS94108/9 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

3 Pole contactor 415 Volt 50 Hz coil AC-3 rating 18 Amps including auxillary No/NC add on blocks Make L &T Model MNX 18 cat No.CS941010/11 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

3 Pole contactor 415 Volt 50 Hz coil AC-3 rating 25 Amps including auxillary No/NC add on blocks Make L &T Model MNX 25 cat No.CS94110 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

3 Pole contactor 415 Volt 50 Hz coil AC-3 rating 40 Amps including auxillary No/NC add on blocks Make L &T Model MNX 40 cat No.CS94190 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

3 Pole contactor 415 Volt 50 Hz coil AC-3 rating 32 Amps including auxillary No/NC add on blocks Make L &T Model ML 2 cat No.SS90701 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

3 Pole contactor 415 Volt 50 Hz coil AC-3 rating 15 Amps including auxillary No/NC add on blocks Make L &T Model MK 1 cat No.SS95200 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

2 pole contactor 240 Volt 50 Hz coil AC-3 rating 16 Amps including auxillary No/NC add on blocks Make L &T Model MU2P cat No.CS90117 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

1 pole contactor 240 Volt 50 Hz coil AC-3 rating 25 Amps including auxillary No/NC add on blocks Make L &T Model MR11W cat No.CS94176 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge.

Spare contactor coil 415 V 50 Hz for model series MNX/ML/MR/MU 9-40 amps upto 25 HP motor Make:L &T cat no.CS94105 or equivalent in havells,Indoasian,C&S or as per existing at site all as specified and directed by Engineer-in-charge

Spare contactor kit 3 pole for contactor model ML2 or equivalent as required at site

Spare contactor kit 2 pole for contactor model MU2P or equivalent as required at site

Spare contactor kit 1 pole for contactor model MR11W or equivalent as required at site

MCB SP 5-32Amps 10 KA "B" curve Make L& T,Schneider,Legrand

MCB SPN 5-32Amps 10 KA "K" curve Make L& T,Schneider,Legrand

MCB 3 pole 5-32Amps 10 KA "K" curve Make L& T,Schneider,Legrand

MCB 4 pole 5-32Amps 10 KA "K" curve Make L& T,Schneider,Legrand

MCCB 40 amps 3 pole with thermal magnetic release breaking capacity 10 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 40 amps 4 pole with thermal magnetic release breaking capacity 18 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 63 amps 3 pole with thermal magnetic release breaking capacity 10 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 63 amps 4 pole with thermal magnetic release breaking capacity 18 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 100 amps 3 pole with thermal magnetic release breaking capacity 10 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 100 amps 4 pole with thermal magnetic release breaking capacity 18 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 125 amps 3 pole with thermal magnetic release breaking capacity 10 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 125 amps 4 pole with thermal magnetic release breaking capacity 18 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

MCCB 200 amps 3 pole with thermal magnetic release breaking capacity 25 KA with Tcs=T cu=100% Make L&T,Havells,Indoasian,MEC (as per site requirement) all as specified and directed by Engineer-in-charge.

For Star Delta pumpset starters Electronic timer 3-30 sec for 240 / 360 / 415V, 50Hz system for pumpsets upto 25 HP Make L &T (ST 100),Selec, C &S,TC

For single phase pumpset starters Electronic timer 3-120 sec for 240 / 360 / 415V, 50Hz system for pumpsets upto 25 HP with Tcs=T cu=100%Make L &T ,Selec, C &S,TC,GIC

3 pole thermal overload relay for MNX type contactors 415 V current range 9-15Amps for pumpsets upto 25 HP Make L & T,C &S,TC (as per site requirement) all as specified and directed by Engineer-in-charge.

3 pole thermal overload relay for MNX type contactors 415 V current range 14-23Amps for pumpsets upto 25 HP Make L & T,C &S,TC (as per site requirement) all as specified and directed by Engineer-in-charge.

3 pole thermal overload relay for MNX type contactors 415 V current range 20-33 Amps for pumpsets upto 25 HP Make L & T,C &S,TC (as per site requirement) all as specified and directed by Engineer-in-charge.

3 pole thermal overload relay for MNX type contactors 415 V current range 24-40 Amps for pumpsets upto 25 HP Make L & T,C &S,TC

3 pole thermal overload relay for ML-2 type contactors 415 V current range 9-14,13-21,20-32,28-42 Amps for pumpsets upto 25 HP Make L & T,C &S,TC (as per site requirement) all as specified and directed by Engineer-in-charge.

2 pole thermal overload relay for MU type contactors 415 V current range 11-18 Amps for pumpsets upto 25 HP Make L & T,C &S,TC (as per site requirement) all as specified and directed by Engineer-in-charge.

4 pole Manual Changeover Open Execution with handle 415 Volts,63 amps Make L & T,C & S(as per site requirement) (as per site requirement) all as specified and directed by Engineer-in-charge.

4 pole Manual Changeover Open Execution with handle 415 Volts,100 amps Make L & T,C & S(as per site requirement) (as per site requirement) all as specified and directed by Engineer-in-charge.

Operating Handle (Operating Handle Kit handle + shaft + center bush + bush clip) for change over as mentioned in above two items

Rotary Handle for MCCB 40-200 amps 3/4 pole (as per site requirement) all as specified and directed by Engineer-in-charge.

S & F in repairs starters single phase prewired for centrifugal pumpset with necessary parameter indicators and actuators of following capacity in steel sheet enclosure and connecting to the existing cable all as diected and specified by Engr-in-charge Make: L &T,Siemens, ABB

(a) 1HP ,relay range 6-10 Amps ,230 Volts 50 Hz Make L&t cat no.CS90319KOVO,havells model urja

(b) 2HP ,relay range 11-18 Amps ,230 Volts 50 Hz Make L&t Cat no.CS90319KOCO,havells model urja

(c) 3HP ,relay range 13-22 Amps ,230 Volts 50 Hz Make L&t Cat no.CS90319KODO,havells model urja

S & F in repairs single phase prewired submersible pumpset starters with necessary parameter indicators and actuators of following capacity in steel sheet enclosure and connecting to the existing cable all as diected and specified by Engr-in-charge

(a) 1HP ,realay range 6-10/9-14 Amps ,230 Volts 50 Hz Make L&t cat No.CS91041BCVG/CS91041BCAG,havells model urja

(b) 1.5HP ,realay range 9-14/11-18 Amps ,230 Volts 50 Hz Make L&t Cat No.CS91042BDAF/CS91042BDCF,havells model urja

(c) 2HP ,realay range 11-18/13-22 Amps ,230 Volts 50 Hz Make L&t Cat No.CS91043BECF/CS91043BEDG,havells model urja

(d) 3HP ,realay range 13-22 Amps ,230 Volts 50 Hz Make L&t cat no.CS91044BEDH,havells model urja

S & F in repairs three phase prewired Direct on line pumpset starters with necessary parameter indicators and actuators in steel sheet enclosure 9-15/8-12.5 Amp relay for 5/7.5 HP pumpsets all as diected and specified by Engr-in-charge make: L& T cat no.MN 16 SS94351,siemens3TW72911A.75,ABB

S & F in repairs three phase prewired fully automatic star delta pumpset starters with necessary parameter indicators and actuatorshaving wideband coil volatage capacity in steel sheet enclosure 9-15/10-16 Amp relay for 15/17.5 HP pumpsets all as diected and specified by Engr-in-charge make: L& T cat no.SS94362 ,siemens 3TE72910A.77,ABB

Supply and fix in repairs tape insulated copper wounded Current transformer having following ratio and VA burden as per site requirement complying with IEC : 62053-21 / IS: 13779 and accuracy of class I including necessary connection with energy meter all as diected and specified by Engr-in-charge

current transformer coil with ratio100/5

current transformert coil with ratio 60/5

current transformer coil with ratio 40/5

Supply and replacement Motor protection relay with in-built earth fault protection MPR300 O/L 4-11 including removal of existing unserviceable one complete all as specified and as directed by Engg-in- charge.

M&L for running welding of CI/DI/MS thickness n'exc 6mm in repairs complete all as diected and specified by Engr-in-charge

S & F in repairs Aluminium alloy, anodised, 200 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed with gi nut bolts, washers on the doors of outdoor LT Panels all as diected and specified by Engr-in-charge

Supply and replacement dry run Motor protection relay with inbuilt microprocesssor controlled Auto/Manual/Bypass Mode available ,suitable for all starters – upto 40A able to work on 240 V and 415 Volts complete all as specified and as directed by Engg-in- charge. Make L & T cat no. I-AD, or equivalent in siemens,schneider

Taking down / up for repair centrifugal pump Set from foundation, separating pump amd motor, opening motor separating stator , rotor and carrying out the repairs and replacement of unserviceable spares reassembling and connecting up with the electric motor all as specified for the following capacity Replacement of spare parts all as specified and as given here in after during the process of repair of of pump set of following capacity & reconnecting the same after repairs as completed Make of pumpsets kirloskar,Crompton ,CRI Note:- The quoted rate involes M & L for temporary joining of pipe lines or fixing of blank plates etc as per site requirment

0.5-1 HP 1 phase , 230 Volts 50 HZ

3.0-7.50 HP 3 phase , 415 Volts 50 HZ

10.0 -15.0 HP 3 phase , 415 Volts 50 HZ

18.5/ 20.0-25 .0 HP 3 phase , 415 Volts 50 HZ

M & L for rewinding with the same gauge of winding wire after Cleaning of rotating and static parts of motors , removing burned out winding , cleaning the slots, insulation of slots,reassembling the pump sets for the following capacites :- Make of pumpsets kirloskar,Crompton ,CRI

0.5-1 HP 1 phase , 230 Volts 50 HZ

3.0 HP 3 phase , 415 Volts 50 HZ

5.0 HP 3 phase , 415 Volts 50 HZ

7.5 HP 3 phase , 415 Volts 50 HZ

10.0 HP 3 phase , 415 Volts 50 HZ

12.5 HP 3 phase , 415 Volts 50 HZ

15.0 HP 3 phase , 415 Volts 50 HZ

18.5/ 20.0 HP 3 phase , 415 Volts 50 HZ

Supply and fix in repairs the spares for centrifugal pump with their respective capacities as mentioned:Make of pumpsets kirloskar,Crompton ,CRI

Impeller made of brass for 0.5 HP pump

Impeller made of brass for 1 HP pump

Impeller made of CI for 3HP pump

Impeller made of CI for 5-7.5 HP pump

Impeller made of CI for 10 HP pump

Impeller made of CI for 12.5 HP pump

Impeller made of CI for 15 -25HP pump

PVC cooling fan for 0.5-1 HP pump

PVC cooling fan for 3-7.5 HP pump

PVC cooling fan for 10-25 HP pump

Pump shaft made of stainless steel for 0.5HP pump

Pump shaft made of stainless steel for 1 HP pump

Pump shaft made of stainless steel for 3-5 HP pump

Pump shaft made of stainless steel for 7.5-12.5HP pump

Pump shaft made of stainless steel for 12.5-15 HP pump

Pump shaft made of stainless steel for 18.5/20-25HP pump

Sleeve made of stainless steel for 3 HP pump

Sleeve made of stainless steel for 5-10 HP pump

Sleeve made of stainless steel for 12.5-15 HP pump

Sleeve made of stainless steel for 18.5/20-25 HP pump

Ball Ball Bearing made of stainless steel for 0.5-1 HP pump Make SKF,Tata,NBC(NEI)

Ball Ball Bearing made of stainless steel for 3 HP pump Make SKF,Tata,NBC(NEI)

Ball Bearing made of stainless steel for 5 HP pump Make SKF,Tata,NBC(NEI)

Ball Bearing made of stainless steel for 7.5 HP pump Make SKF,Tata,NBC(NEI)

Ball Bearing made of stainless steel for 10 HP pump Make SKF,Tata,NBC(NEI)

Ball Bearing made of stainless steel for 12.5 HP pump Make SKF,Tata,NBC(NEI)

Ball Bearing made of stainless steel for 15 HP pump Make SKF,Tata,NBC(NEI)

Ball Bearing made of stainless steel for 20 HP pump Make SKF,Tata,NBC(NEI)

Shaft Lock

Water seal for 0.5 to 1HP pumpset

Gland Cap made of CI for 3-7.5 HP pump

Gland Cap made of CI for 10-15 HP pump

Gland Cap made of CI for 18.5/20-25 HP pump

Gland Cap bolts made of stainless steel

Coupling assembly assembly with key for 20-25 HP pump

Lathe machine work for Pump

Bakelite electrical 6/3 pole terminal for 3-5HP motor

Bakelite electrical 6/3 pole terminal for 7.5-10HP motor

Bakelite electrical 6/3 pole terminal for 20-25HP motor

Brass air release key and socket complete set

M & L for Lifting of vertical/ horizontal submersible pump set of upto capacity 1HP to 15 Phase 220/415 V 50 Hz from borewell/shallow well of depth from 40M to 70M by disconnecting the electrical connections, column pipes of various sizes, submersible cable, removing carefully to store for safe custody or transportaion to workshop for repair and back and reinstallation after repair of pump set and testing all as specified complete all as directed by EIC. Note:The quoted rate includes dewatering of the openwell with necessary tools and human power required.

M & L for Opening the submersible pumpset , carrying out the repairs and replacement of unserviceable spares reassembling and connecting up with the electric motor all as specified Replacement of spare parts all as specified and as given here in after during the process of repair of pump upto 5.0 HP Submersible Pump set vide Sl item No 88 above

M & L for Cleaning of rotating and static parts of motors , removing burned out winding , cleaning the slots, insulation of slots, rewinding with the same gauge of PVC coated copper winding wire,reassembling the pump sets for the following capacity submersible pump.Make of pumpsets kirloskar,Crompton ,CRI,Beacon

M & L for Cleaning of rotating and static parts of motors , removing burned out winding , cleaning the slots, insulation of slots, rewinding with the same gauge of copper winding wire including replacement of unserviceable mechanical seal,angular Ball Bearing and cable etc,reassembling the pump setsfor the following capacity submersible pump.

Supply and fix in repairs the spares for vertical centrifugal submersible pump with their respective capacities as mentioned:

Top bowl housing assembly

"O" ring valve metal seat

Brass sleeve/distance piece

Key set

Stage Bowl

Thrust Ball Bearing assembly

Lathe work for pump

Strainer (with screwing etc.)

Brass bush (4 No's set)

Coupling assembly

Impeller made of FRP Vinyl impellar for V4 engines

Pump shaft

Diffuser

Cable guard made of stainless steel

Cheese haed cap screw

Casing strip with threaded bolt end

Transformer oil having dielectric strength 50Kv/2.5mm Make:Indian oil

Sand guard

Rotor shaft pump

CIR clip

Lower end of the shield of motor/pump

M & L for Opening the horizontal/openwell submersible pump set of following capacity , carrying out the repairs and replacement of unserviceable spares reassembling and connecting up with the electric motor all as specified for the following capacity of pumpset Replacement of spare parts all as specified and as given here in after during the process of repair of of pump of horizontal submersible pump set with capacities from 0.5 HP to 5 HP single phase and three phase

Motor rewinding 1-1.5 HP 230 V 50 Hz

Motor rewinding 2 HP 230 V 50 Hz

Motor rewinding 3 HP 415 V 50 Hz

Motor rewinding 5 HP 415 V 50 Hz

Motor rewinding 7.5 HP 415 V 50 Hz

Motor rewinding 10 HP 415 V 50 Hz

Motor rewinding 15 HP 415 V 50 Hz

Lathe machine work for pump/motor any capacity

Brass bush 1 HP 230 V 50 Hz

Brass bush 1.5-3 HP 230 V 50 Hz

Brass bush 5-7.5 HP 415 V 50 Hz

Brass bush 10-15 HP 415 V 50 Hz

Carbon Thrust Ball Bearing and plate for 1-2 HP 230 V 50 Hz

Carbon Thrust Ball Bearing and plate for 3 HP 415 V 50 Hz

Carbon Thrust Ball Bearing and plate for 5-7.5 HP 415 V 50 Hz

Carbon Thrust Ball Bearing and plate for 10-15 HP 415 V 50 Hz

Impeller made of cast iron 1 HP 230 V 50 Hz

Impeller made of noyl PVC 1.5 HP 230 V 50 Hz

Impeller made of cast iron 2-3 HP 230 V 50 Hz

Impeller made of cast iron 5 HP 415 V 50 Hz

Impeller made of cast iron 7.5 HP 415 V 50 Hz

Impeller made of cast iron 10-15 HP 415 V 50 Hz

Supply and fix in repairs nylon rope as per the site requirement for borewells with HDPE pipes

Supply and fix/ lowering in repairs High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors, trenches,borewell etc. including necessary fittings such as tee,bends,elbow etc having bore sizes as following Of Make:SFMC ,Finolex,Supreme:-

(i) 25 mm bore

(i) 40 mm bore

(ii) 50 mm bore

M&L in repair CI borewell cap of size 300mm dia 6mm thickness and similar to casing pipe including necessary nuts, bolts etccomplete all as specified and as directed

Supply and fix in repairs mild steel connecting pieces one end flanged and other threaded including two coat of anticorrosive paint and taking up/down old unserviceable connecting piece complete including necessary nuts, bolts and rubber packing material for the size of pipes upto 200 mm bore all as specified and directed.

M&L for Angle Iron,flat iron etc as in broken or unserviceable cross arms, brazings, supports,, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint.

Supply and fix in repairs heavy duty iron chain able to withstand a weight of 50-100 kgs at a height of not less than 6 mtrs

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) for plinth ,founation,platform etc including necessary formwork and demolition of unserviceable structure complete all as specified and as directed.

M&L for PCC 1:2:4 type 8-1 (using 20 mm graded stone aggregate) for plinth ,founation,platform etc coverincluding necessary formwork and demolition of unserviceable structure complete all as specified and as directed.

Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 10 mtrs Flow rate-35 LPM power input 0.1 KW with three opearting position OFF/AUTO/MANNUL and componants of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections, relaying of pipe lines, GI fittings, and removal of old unsv one complete all as specified and as directed. Make Wilo cat no.PB88,Kirloskar,KSB

Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 16 mtrs Flow rate-50 LPM power input 0.2 KW with three opearting position OFF/AUTO/MANNUL and componants of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections relaying of pipe lines, GI fittings, GI fittings and removal of old unsv one complete all as specified and as directed. Make Wilo cat no. PB 200,Kirloskar,KSB

Supply and fix on replacement water lifting pump 0.25 Hp single phase suction and discharge,( 25 mm x 25 mm ) total head upto 3- 15 mtr, capcity upto 1600 LPH,with thermal over load protection monoblock pump type suitable for 230 volts with all necessary GI fittings including copper cable upto 5mtr.Including removol of old unsv one complete all as specified and as directed.Make kirloskar tiny,crompton

Supply and fix on replacement water lifting pump 0.5 Hp single phase suction and discharge,( 25 mm x 25 mm ) total head upto 6- 42 mtr, capcity upto 2120 LPH ,with thermal over load protectionmonoblock pump type suitable for 230 volts with all necessary GI fittings including copper cable upto 5mtr.Including removol of old unsv one complete all as specified and as directed.Make kirloskar Jalraj

Supply and fix on replacement water lifting pump 1 Hp single phase suction and discharge,( 25 mm x 25 mm ) total head upto 6-42 mtr, capcity upto 3300 LPH ,with thermal over load protection monoblock pump type suitable for 230 volts with all necessary GI fittings including copper cable upto 5mtr.Including removol of old unsv one complete all as specified and as directed Make kirloskar Jalraj-2

Supply and fix on replacement water lifting and booster pump 1.5 Hp single phase suction with necessary factory fabricated auxillary tank and discharge,( 25 mm x 25 mm ) total head upto 10-42 mtr, capcity upto 75 - 6 LPM monoblock, multiple noryl/brass impellar pump type suitable for 230 volts with all necessary fittings including copper cable upto 5mtr.Including removol of old unsv one complete all as specified and as directed Make kirloskar CPBS 84424H/V,KSB KSB KHM 406,Texmo ADBS 44 HS / 60L

S & F in repairs pressure control switch having ,IP 65 rating,dry running protection with automatic reset NoiselessDesigned for high start/stop per hour Built in thermal protection Make:Btalli,V guard,CRI

S & F in repairs pressure control switch KP-35 Pressure Switch - 060-113391, R:-0.2 to 7.5 BAR, D:0.7 to 4 BAR, IP 30 for Water Pump Make:Btalli,V guard, Danfoss

S & F in repairs the spares for on line pressure boosting pump for the capacity mentioned

(i)Printed circuit board for PB 200 make wilo

(ii)Printed circuit board for PB 88 make wilo

(iIi)flow sensor for PB 200 make wilo

(iI)flow sensor for PB 88 make wilo

S & F in repairs film capacitors able to work on 440 V ,50Hz supply for motor run /start having following capacity.Make:Epcos ,L&T,SH,Havells

6 micro farad

9 micro farad

12 micro farad

10 mili farad

20 mili farad

36 mili farad

45 mili farad

56 mili farad

60 mili farad

72 mili farad

76 mili farad

120 mili farad

150 mili farad

250 mili farad

S & F in repairs flexible cable 3 core copper cable of following capacity and size as per IS 694:

3 core 1.5 sqmm

3 core 2.5 sqmm

S & F in repairs 3 pin plug top 6 amps 240 V ISI approved plug top shock reistant and durable

S & F in repairs bakelite plate not less than12 mm thick as the stand of 0.5HP and 1 HP monoblock pumpset installed at various locations.

M&L for Cleaning and redevelopment of existing borewells and with 250 psi and 750 cfm capacity air compressor (to get maximum yeild ) continously until clear water obtained all as specified and directed by EIC. Note : Cleaning hours will be measured after the cleaning machine has gone to the lowest depth already achieved in the existing borewell.

Suppy and fix in repairs agitator shaft in the dosing tank made out of poly propylene rigid of dia 32 mm, length 500 mm with two bladed pitched blade turbine impeller with 3Nos. blades are welded to the shaft including removal of old unsv one complete all as specified and as directed. Make : As per E-in-C's Branch approved manufacturer.

Material and labour for preparation of feeder pillar /outdoor & indoor LT starter panels/DG st at various places , old decorated surfaces by scraping rust , grease ,dust and old paints and applying one coat of red oxide two coats of synthetic enamel paint with spray painting complete all as specified and as directed. Note:The cost of taking up and refixing of switchgears,contactors and other electrical and mechanical parts is deemed included in the quoted rate. Make of paint: Berger Luxol,Asian Paints,Nerolac Paints

Supply and fix in repairs PVC two way MCB box with metallic din rail Make:Havells,Legrand,Schneider

M & L for Lathe work for pumpset shaft of any size

M &L for 3 position piano switch having three positions manual/off /auto for PB-88/200 inline booster pump

S & F in repairs not less than 2 mm thick GI strainer strainer for horizontal submersible pumps including necessary gI fittings, nut bolts, gasket, flange etc all as required at site complete all as specified an as directed by Engineer in charge for following sizes

40 mm bore

50 MM Bore

80 mm bore

100 mm bore

Supply and fix in repairs float switch sensor having PVC body with 1 mtrs 2.5sqmm 2 core included cable working on 8 Amps 240 Volts 50Hz

Supply and fix in repairs stainless steel water pressure gauge having pressure range 0- 25 Kg/sq cm having socket for 15 mm with necessary SS pipe of length approx 30 cm and hudraulic isolation valve necessary including removal of old unserveceable one complete all as specified and directed.Make:H guru, Wika,Baumer

Supply and lay in repairs 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV of following sizes fixed complete to walls, ceilings or in floors,laid in trenches etc. with all fitting such as tee, bends, union, elbow reducer, pasting adhesive materials etc with outer dia of pipe 63 mm Make:Finolex,Prince,Kisan,Supreme

M & L for fixing in repairs boxes fabricated out of GI sheet of thickness not more than 2mm for covers of inline booster pumps, tullu pumps , centrifugal pumps,starter panel boxes etc all as directed and specified by Engineer in charge.

Cleaning and removing all scale old dirt from PVC/ RCC/ steel service tanks, at any floor of Md Accns, OTM Accns under GE (North) area with anti bacterial agent having six stage of cleaning process (i.e mechanically, dewatering, sludge removal, high pressure, vacuum cleaning, anti bacterial spray of tank capacity and writing of the date of cleaning of the water tank with white/Black letters complete all as specified and as directed by the Engineer-in-Charge for the capacity up to 500 litres. Note:-In case of airlocking of water tanks post cleaning contractor will normalise the water supply after the service to user's terminal by using requisite equipment/machinery/tools .The quoted rate deemed includes the same.

All as serial item No. 96.00 but for Capacity 1000 Ltrs

All as serial item No. 96.00 but for Capacity 2000 Ltrs

All as serial item No. 96.00 but for Capacity 5000 Ltrs

All as serial item No. 96.00 but for Capacity 10000 Ltrs

Supply and replcement of suitable regular LID/ Tank covers made of fiber reinforced plastics/ heavy duty PVC for outdoor weather proof black in colour ECO polimer/modular build type, suitable clear opening type having minimum load bearing of 100 Kg with locking arrangement with PVC hinges fixed with the tank with MS screws at any floor of Md Accns, OTM Accns under GE (North) area complete all as specified and as directed by the Engr-in-Charge for the capacity up to 500-2000 litres.Make:Sintex,Supreme,Plasto

All as serial item No. 101 but for Capacity 5000-10000 Ltrs

Supply and fix in repairs 3 inches PVC butt hinges with locking arrangement using necessary Galvanised iron screws on PVC overhead water tanks kept on married accn. And OTM bulding upto 4 storeyed all as directed and specified by Engineer-in-charge

Cutting green growing and grass by manual labour or by machine at all E/M water supply installation premisses and along the boundary fencing and removing rubbish from the site of work where didected not exceeding 100 mtr from the starting point. (The green growth shall be cleaned once in every three month and the measuremet shall be taken every time independently for executed quantity each time.

Supply and fix in replacement of synthetic metal PTMT Float valve heavy duty with suitable company designed length Aluminium Rod, HDPE Ball, SYMET PTMT ball cock of 15 mm dia including taking out the old one in over head reservoir located upto 4 stories buildings of OTM and Married Accomodation as per the direction of Engr- In - Charge. Make : PRAYAG/ Zoloto/Jaypee

Supply and fix in replacement of of synthetic metal PTMT Float valve heavy duty with suitable company designed length Aluminium Rod, HDPE Ball, SYMET PTMT cock of 20 mm dia including taking out the old one in over head reservoir located upto 4 stories buildings of OTM and Married Accomodation as per the direction of Engr- In - Charge. Make : Make : PRAYAG/ Zoloto/Jaypee

Supply and fix in replacement of of synthetic metal PTMT Float valve heavy duty with suitable company designed length Aluminium Rod, HDPE Ball, SYMET PTMT ball cock of 25 mm dia including taking out the old one in over head reservoir located upto 4 stories buildings of OTM and Married Accomodation as per the direction of Engr- In - Charge. Make : Make : PRAYAG/ Zoloto/Jaypee

Supply and fix in replacement of of synthetic metal PTMT Float valve heavy duty with suitable company designed length Aluminium Rod, HDPE Ball, SYMET PTMT ball cock of 40 mm dia including taking out the old one in over head reservoir located upto 4 stories buildings of OTM , Married Accomodation and underground sump as per the direction of Engr- In - Charge. Make : Make : PRAYAG/ Zoloto/Jaypee

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Sujitha Infrastructure (BID ID -3403422)

ANAND ENTERPRISES (BID ID -3403641)

Suchit constructions (BID ID -3404772)