hoes powrah - as per IS 1759 (Q3)

hoes powrah - as per IS 1759 (Q3)

Factory made steel windows with side hung shutter with glazng bars using profile section

Factory made steel windows with side hung shutter without glazng bars using profile section

Framed mild steel work such as grills grating etc. with ends of bars shouldered and or riveted

75 mm thick cement concrete type C 1 1.3.6 using 20 mm graded stone aggregate

S and F Rotational moulded polythene water storage tanks 500 ltrs capacity cylindrical vertical with closed top

Mand L for Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius

15 mm thick rendering in cement mortar 1.6 on fair faces of brick work or concrete

Cutting into existing manhole for connecting new drains and making good for 150mm bore pipe

RCC type B 0 1.2.4 using 12.5 mm graded stone aggregates as in shelves cooking platform etc

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending

M and L Granite 16 TO 18 mm of any type work table rubbed and polished thick in steps jambs

Two coats of synthetic enamel paint over and including a coat of red oxide primer over steel and iron

Taking down chowkhats or frames with shutters without taking off shutters from the frames

Demolition of cement concrete unreinforced of any description and in any position

S and F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm

Rolled mild steel sections as in columns main beam rafter purlins and similar works

150 mm thick cement concrete type D 2 1 4 8 using 40 mm graded stone aggregate

Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M 30

S and F Solid PVC door frame of the size 50mmx47mm with a wall thickness of 5mm made out of extruded 5mm thick

Factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes

S and F 150 mm long aluminium anodized barrel tower bolts of extruded section

S and F 125 mm long aluminium anodized door handle fixed in repairs

S and F for Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin

S and F PVC flushing cistern 10 litre capacity valve less symphonic action type low level

S and F in repairs WC squatting pan Orissa Pattern of size 580 x 440mm white with integral foot rest

S and F stainless steel sink S and F sinks made of stainless steel 1 mm thick for kitchen or laboratory

25 mm thick cement concrete type B 0 1.2.4 using 12.5 mm graded stone aggregate

Roughning surfaces of old concrete floor by picking sweeping clean and washing down

Glazed ceramic coloured tiles 6 to 7 mm thick in vertical surfaces area of each tile exceeding 0.12 Sqm

Non skid ceramic coloured tiles 7 to 8mm thick square rectangular area of each tile exc. 0.08 sqm

Rendering 5 mm thick on fair faces of concrete surfaces finished fair and even on ceiling surfaces

Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and fair

Three coats of white washing on newly plastered ceiling surfaces including preparation

S and F 15 mm dia PVC bib taps standard of PTMT any colour screwed for iron pipe

S and F 15 mm dia PVC angle cock standard of PTMT any colour screwed for iron pipe

S and F GI tubes medium grade with all fitting and fixed complete to walls ceilings or laid

S and F tubes 20 mm bore dia medium grade galvanised with all fitting and fixed complete

S and F in repair for PVC SWR pipes single socketed in any length