Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.1 LAccepted-AOC | ₹1.1 L | 1 | Accepted-AOC Lowest quoted amount 5.81 percent above the estimate amount |
| 2 | 2₹1.2 L+₹10,050 (9.16%)Rejected-Finance | ₹1.2 L+₹10,050 (9.16%) | 2 | Rejected-Finance Higher bidder 2 |
| 3 | 3₹1.2 L+₹11,950 (10.9%)Rejected-Finance | ₹1.2 L+₹11,950 (10.9%) | 3 | Rejected-Finance Higher bidder 3 |
| Sl No | Description | Qty | Unit | TAJ ELECTRICAL WORKS L2 | A VELMURUGAN L1 | MAHILNIVASINI CONSTRUCTIONS AND TRANSPORT L3 |
|---|---|---|---|---|---|---|
| 1.00 | Supply of 5mtr length hot dip galvanized Octagonal pole fabricated from HT steel with bottom dia 130mm, top dia 70mm, thickness 3mm and base plate : 200mm x 200mm x 12mm thick with inbuild junction box with suitable single arm bracket and foundation bolts/nuts/washer and anchor plate as required. | 3 | Nos | 10,000 ₹30,000 Lowest | 10,000 ₹30,000 Lowest | 17,500 ₹52,500 |
| 2.00 | Erection of metallic pole of following length in cement concrete 1:3:6 graded stone aggregate 20mm of size 300mm x 300mm x750mm depth with reinforced (steel) 10mm dia -2Kg, 8mm –1Kg and foundation including excavation and refilling etc as required. | 3 | Nos | 5,000 ₹15,000 | 8,000 ₹24,000 | 2,500 ₹7,500 Lowest |
| 3.00 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6500°K(As per ANSBin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM
warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 90 watts | 3 | Nos | 6,000 ₹18,000 | 300 ₹900 Lowest | 5,500 ₹16,500 |
| 4.00 | Supply of following size of XLPE insulated, sheathed armoured UG aluminium conductor power cable 1.1KV grade as required.(Make: Polycab, Havells) 4 x 16sq mm. | 85 | meter | 280 ₹23,800 | 220 ₹18,700 Lowest | 290 ₹24,650 |
| 5.00 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering/suitable DWC pipe and refilling the trench etc. as required.
Upto 35 sq. mm | 75 | meter | 400 ₹30,000 | 450 ₹33,750 | 250 ₹18,750 Lowest |
| 6.00 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.
a. 4x 16sqmm | 6 | Nos | 500 ₹3,000 | 400 ₹2,400 | 300 ₹1,800 Lowest |
Tender Value
₹1.0 L
EMD Value
₹2,500
Closing Date
2 Jul 2026, 4:00 pmClosed
The Assistant engineer
Administrative Biulding/ Electrical wing /Pondicherry university
PROVIDING STREET LIGHTS APPROACH ROAD FROM E TYPE QUARTERS TO GEOMAGNETISM.
2026_PU_914512_1
pu/Elw/2026/EQuarters
Open Tender
Electrical Works
Works
15 days
pondicherry university
Please refer Tender documents.
3 documents required · 3 mandatory
₹525
The finance officer
₹2,500
Yes
23 Jul 2026
24 Jun 2026
3 Jul 2026
24 Jun 2026
2 Jul 2026
24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of 5mtr length hot dip galvanized Octagonal pole fabricated from HT steel with bottom dia 130mm, top dia 70mm, thickness 3mm and base plate : 200mm x 200mm x 12mm thick with inbuild junction box with suitable single arm bracket and foundation bolts/nuts/washer and anchor plate as required. | - | Nos | 1.25 | - |
| 2 | Erection of metallic pole of following length in cement concrete 1:3:6 graded stone aggregate 20mm of size 300mm x 300mm x750mm depth with reinforced (steel) 10mm dia -2Kg, 8mm –1Kg and foundation including excavation and refilling etc as required. | - | Nos | 1.25 | - |
| 3 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6500°K(As per ANSBin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM
warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 90 watts | - | Nos | 1.25 | - |
| 4 | Supply of following size of XLPE insulated, sheathed armoured UG aluminium conductor power cable 1.1KV grade as required.(Make: Polycab, Havells) 4 x 16sq mm. | - | meter | 1.25 | - |
| 5 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering/suitable DWC pipe and refilling the trench etc. as required.
Upto 35 sq. mm | - | meter | 1.25 | - |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.
a. 4x 16sqmm | - | Nos | 1.25 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
Tendernotice_2.pdf
PDF • 0.52 MB
BOQ_961066.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .