Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 CrAccepted-AOC 20 1ST A CROSS SAI NAGAR AREHLLI UTTARHALLI BANGALORE 560 061 | BENGALURU URBAN | KARNATAKA | 560061 | ₹6.5 Cr | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹6.6 Cr+₹4.9 L (0.75%)Rejected-AOC | ₹6.6 Cr+₹4.9 L (0.75%) | L2 | Rejected-AOC NOT BEING LOWEST |
Tender Value
₹6.0 Cr
EMD Value
₹8.0 L
Closing Date
29 Jan 2022, 6:00 pmClosed
HQ CECZ Island Grounds Chennai - 09
HQ CECZ Island Grounds Chennai - 09
PROVN OF STORAGE SHED AT OD AVADI PH I OF TWO PHASES
2021_MES_492496_1
PROVN OF STORAGE SHED AT OD AVADI PH I OF TWO PHAS
Open Tender
Civil Works
Lump-sum
912 days
GE Avadi
As per tender
8 documents required · 8 mandatory
₹3,000
GE Avadi
₹8.0 L
Yes
3 Mar 2022
4 Dec 2021
1 Feb 2022
4 Dec 2021
29 Jan 2022
17 Jan 2022
4 Dec 2021 - 17 Dec 2021
Amount
GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XIII are under Ser No. 2.00 to 14.00 are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.
Lumpsum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I
Lumpsum price worked out by the tenderer for DEMOLITION as listed in Schedule ‘A’ Part-II
Lumpsum price worked out by the tenderer for SITE CLEARANCE as listed in Schedule ‘A’ Part-III
Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IV
Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-V
Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VI
Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VII
Lumpsum price worked out by the tenderer for ROAD/ FOOTPATH /CULVERT as listed in Schedule ‘A’ Part-VIII
Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part- IX
Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part- X
Lumpsum price worked out by the tenderer for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part- XI
Lumpsum price worked out by the tenderer for LIGHTENING PROTECTION as listed in Schedule ‘A’ Part- XII
Lumpsum price worked out by the tenderer for FIRE FIGHTING as listed in Schedule ‘A’ Part- XIII
SCHEDULE `A' PART - XIV to XVI is not prepriced by MES and prepriced rates indicating 0.0 under column 5 signifies this fact only. Bidders shall insert their rates in Green field under Col-6.
SCHEDULE 'A' PART XIV - : EOT CRANE
Supply and errection of 500 Kg Single Girder A Frame type crane with electric power for motors AC,3 phase, 415 V,50 Hz and control units with 48 V,1 phase, 50 Hz complete of span 2.67 mtrs, height of lift 3 mtrs, class of duty to be class II 30% ED M5 with 150 starts per hour, UK make or equivalent make Street Hoist-Chain, Operation from floor through Pendant Push Button Control, indoor type with 45 degree Ambient temperature, Main hoisting speed is 5/1.2 m/min dual speed with motor rating 1/0.25 KW, Cross travel speed is 14/7 m/min duel speed with motor rating 0.2/0.1 KW, Manual long travel with wheel load without impact is minimum 0.75 Ton including wheel breaks, Single Shank Swivelling type Hooks, Limit Switches for Hoisting/Cross travel , Provision of Over load limit devices including painting of crane with 2 coats of Golden Yellow enamel paint over a coat of redoxide primer complete including suitable 3 phase power cable of length 50 mtrs for long travel of crane with suitable drum in and including suitable necessary civil work if required as per site condition with 15 months warranty complete all as specified and as directed. Make: K2 Cranes, Vertex Cranes, Reva Cranes or equvalent make.
Earthling complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below normal ground level with the top edge of earth plate at a depth of not less than 1.5 m below normal ground level connected to GI earth strip 32x6 mm dia by means of bolts, nuts, check nuts and washers made out of GI and GI earth strip protected by 40 mm bore light grade GI pipe,watering arrangement by provision of 20mm dia GI pipe medium grade with cast iron funnel,provision of test point and connected to main control board all as shown in electrical plate No 3 of SSR Part I including necessary earth work and excavation in any type of soil and PCC 1 : 2 : 4 type B - 1 in chamber and 40 mm thick RCC 1 : 2 : 4 type B - 1 cover slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways with 6 mm dia M S hooks complete all as specified and as directed.
SCHEDULE 'A' PART XV - : COOLING APPLIANCES
Supply and installation,commis-sioning of water cooler fully stainless steel electric driven (single phase ), having approx stroage and normal cooling capacity of 60 / 120 litre per hour all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single Phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230v with accuracy of +/- 2.5% and of capacity of 1.0 KVA all as specified and directed.
SCHEDULE 'A' PART XVI - : FITTINGS & FIXTURES AND MISCELLANEOUS ITEMS
Material and Labour for providing and applying 2.5 mm thick and marking strips (Retro reflective ) of specified shade or colour using hard thermo plastic material by fully automatic thermoplastic paint applicator mechine fitted with profile shoe,Glass bed dispenser ,propane tank heater and profile shoe heater ,driven by experienced operator on road surface including cleaning the road surface of all dirt,seals,oil, grease and foreign material etc.complete all as per specification and directed.
Supply installation erection commissioning and testing of LT Feeder Pillar cubical in door type weather/dust of,factory made out of 3.15 mm thick CRCA sheet powder coated with front and back side openable with suitable cable chamber and front side shutters with locking arrangement panel base of angle iron 50x50x6 mm upto 45 cm height for 433 volts, 3 phase, 4 wire system including Four Pole Aluminium bus bar 400 amp capacity including control wiring with suitable size of PVC insulated stranded copper conductor and incoming/outgoing connection with aluminium busbar complete as per manufacture design complete mounted or fixed on PCC foundation above 0.45 mtr on floor and cable connection with suitable size of aluminium lugs and glands size of LT Panel 1500mm x 9500mm x 450mm complete comprising the following :-
INCOMING MCCB a) MCCB,125 Amp 4 pole, FE Frame,Ics=100% of Icu, 35 KA breaking capacity with adjustable Microprocessor release -01 Nos. OUTGOING MCCBs (i) MCCB,100 Amp 4 pole, FE Frame,Ics=100% of Icu, 35 KA breaking capacity with adjustable Microprocessor release -01 Nos (ii) MCCB,63 Amp 4 pole, FE Frame,Ics=100% of Icu, 35 KA breaking capacity with adjustable Microprocessor release -02 Nos (iii) Indicating Lamp LED Type - 01 set of three (iv) Multifunction meter digital type -01 No
Supply.install,testing and commissioning of cubical outdoor LT Electrical distribution feeder pillar box CPRI approved platform mounted factory made totally enclosed dust and vermin proof (protection class IP-65) double shutter front opening with locking arrangement complete made of 1650mm x 1100mm x 450mm thick frame work and 3.15mm thick CRCA sheet duly painted over outside and inside with detachable sheets with holes for cable glands,separate bus bars,cable entry and exit mounted on PCC pillers with bolts grounted complete .The panel comprising of Aluminium bus bars of 400A capacity,415 volt 50Hz,3 phase 4 wire system with insulators and internal wiring complete with following requirements :-
INCOMING:- (i) MCCB,200 Amp 4 pole, FE Frame,Ics=100% of Icu, 35 KA breaking capacity with adjustable Microprocessor release -01 No OUTGOING (i) MCCB,100 Amp 4 pole, FE Frame,Ics=100% of Icu, 35 KA breaking capacity with adjustable Microprocessor release -01 Nos (ii) MCCB,63 Amp 4 pole, FE Frame,Ics=100% of Icu, 35 KA breaking capacity with adjustable Microprocessor release -03 Nos (iii) Indicating Lamp LED Type - 01 set (iv) Multifunction meter digital type -01 No
Supply and fix 20W (1X4') LED Astra surface & wall mounted LED batten with extruded aluminium housing and robust construction with electronic driver complete with all fixing arrangement suitable for operating voltage 100 to 270 Volts all as specified and directed .Make: Philips cat part no. BN150W LED20S-6500 PSE OD GR or equivelent model in WIPRO
Supply and fix 10W (1X4') LED smart bright surface and wall mounted LED batten, a reliable and affordable system that delivers up to 40% energy savings complete with all attachment & fixing arrangement all as specified and directed. Make: Philips Cat part No.BN021 LED 10S-6500 PSU GRS1 or equivelent model in WIPRO
Supply and fix MCB DB TPN 8 way, having degree of protection as per IP 43 with metal door (double door) 415 Volts complete with 200 Amps rated copper bus bar with neutral link with provision for MCB TPN as incomer and SP MCBs as outgoing and total number of modules equal to 8 + 24 with blanking plates etc, all as specified and directed as per L&T cat part No.DBTPN008DD
Supply and fix MCB DB SPN 8 way, having degree of protection as per IP 43 with metal door (double door), 240 Volts, complete with 200 Amps rated copper bus bar and neutral link with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 6 complete all as specified and directed. L&T cat part No.DBSPN006DD(For Security light )
Supply and fix DB VTPN MCCB incomer, 8 way, 415 Volts, powder coated double door CRCA sheet metal door, complete with 200 Amps rated copper bus bar and neutral link with provision for MCCB as incomer and MCB TP, SP MCBs as outgoing with blanking plates etc, complete all as specified and directed as per Indo Asian cat part No.811890
Suppy and fix MCCB, 4 pole, 100 Amp with ultimate breaking capacty Icu-16kA at 415 Volts and adjustable thermal magnetic release conforming to IEC 60947 Part-I/IS-13947-Part-I with breaking capacity Ics=100%Icu at 415 Volts of 16 KA, overload setting 70% to 100%, short circuit setting 5 to 10 times complete all as specified and directed
Suppy and fix MCB TPN 63 Amps,415 Volts,10 KA, "B" series complete all as specified and directed. L&T cat No.AU10S4063B
"S&F flame proof/weather proof, high bay light fittings of 70W LED Well glass fixture IP-66, Temp class T6 with citizen japan COB LED, in Cast Aluminium LM6, certified by CIMFR Dhanbad for gas group IIC. Make : sudhir Cat No. WMF/1240"
"S&F fresh air fans 24" flame proof/weather proof IP65 wall mounted,Temp class T5, in Cast Aluminium LM6, certified by CIMFR Dhanbad for gas group IIC. Make : sudhir Cat No. WMF/140"
"S&F flame proof/weather proof IP 65,Exhaust fan, single phase, 1440 RPM, Temp class T6, in Cast Aluminium LM6, certified by CIMFR Dhanbad for gas group IIC and Zone 21 & 22. Make : sudhir Cat No.EF/140"
Supply and Fix MCB single pole 6 Amp to 32 Amps, 230 Volts, 10 KA, 'B' series complete all as specified and directed L&T Cat No.AU10S10323B
HARI ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .