REPAIR TO ROAD FURNITURE, INFORMATORY SIGN BOARD AND MISC WORK IN DOMESTIC AREA AT AF STN UTARLAI

Amount

S&F in repair solar road studs made out of aluminium housing and precast construction solar powered by SEIMENS monocrystal solar panel 2W 120mA type of battery NI-CD 1.2 volt 2500m AH & flash rate 2Hz or 70Hz view distance over 300mtr. Fitted with 2Hz EL-805-3 pieces each side on two ends total 6 pieces LEDs, flashing upto 12 Hrs of light at night and solar battery automatically charged in day/ sun light duly fixed with cement and hardener. 125 x 125 x 25mm in red /yellow colours complete all as specified and directed.

S&F in repairs road studs GB733 (B) (100X100X 19mm) made of ABS materials two reflectors are fitted in body. The road stud is dynamically designed so that it can bear load up to 25 Tons and its impact strength is about 253 KN weight of stud is 130 gms. Approx body available in Red/White/ Yellow colour available with swareflex beads also. complete all as specified and directed.

S&F in repair retro reflective road delineator made of ABS plastic body having two 100 mm dia circular reflectors & two rectangular reflectors of 70mm x 23 mm fixed on both sides of 1000 mm long MS pipe 50mm dia fully powder coated guide post to fixed with screws/embeded in concrrete PCC 1:2:4 type B-2 usuing 40 mm graded crusted stone aggregate having size 20cm x 20cm x 20cm complete all as specified and directed. Note Reflector shell be covered with 4mm dia galvanised wire of mesh size 100 x150mm .

S&F in repairs speed bumps made from heavy duty ABS high resistance wear & tear property UV stabilized black & yellow combination high reflective reflector having available on both sides in red & yellow colour with L= 500mm, W=380mm, H=50mm complete all as specified and directed.

Supply and fixing in repair Road Safety Convex Mirror 100 cm dia Model No OS-789 of make Oscar or equivalent make including stand/padestal embedded /fixed in to concrrete PCC 1:2:4 type B-2 usuing 40 mm graded crusted stone aggregate having size 45x45x60cm and necessary earth work.,complete all as specified and directed by Engr-in-Charge.

Dismantling of old / brocken cautionary mandatory and information sign boards of any size, any position and any description including frame work embedded in ground or PCC, complete as as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L for providing cement concrete in foundation filling and mass concrete 1:2:4, type B2 (using 40mm graded aggregare), complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, work such as cautionary mandatory and information sign boards and similar work channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F in repair retro reflective cautionary mandatory and information sign boards as per IRC 67 made of high intensity reflective grade sheeting fixed over aluminium sheet 1.5mm thick, including writing letters(computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shade incl making arrow/sign, border and logs,complete all as specified and directed. Note: The rate of 1.5mm thick sheet shall beincluded in this item.

S&F in repair solar flasher pole mounting with protective cover road delineator made of ABS plastic body having circular solar flasher fixed on 1000 mm long MS pipe 50mm dia fully powder coated guide post to fixed with screws/embeded in concrete PCC 1:2:4 type B-2 using 40mm graded crusted stone aggregate having soze 20cmx20cmx20cm complete all as specified and directed. Note:- Solar flesher shall be covered with 4mm dia galvanised wire of mesh size 100x150mm.

S&F in repairs retro reflective cautionary mandatory and information sign boards as per IRC 67 made of high intensity reflective grade sheeting fixed over 06mm thick acrylic sheet, including writing letters(computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shed incl making arrow/sign, border and logs,complete all as specified and directed. Note: The rate of 6mm thick acrylic sheet shall beincluded in this item.

S&F Framed work such as cautionary mandatory and information sign boards, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel anging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and similar work structural steel con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in retro reflective informatory sign board as per IRC 67 made of high intensity reflective grade sheeting over MS black sheet 1.25 mm thick , including writing letters (computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shed incl making arrow/ sign, border and logs with same material,all as specified and directed. Note: The rate of 1.25mm thick MS sheet shall beincluded in this item.

M&L for preparation of old steel surface of any description, over 10cm width or girth and applying one coats of synthetic enamel paint , complete all as specified and directed

M&L for preparation of new steel surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide , complete all as specified and directed

M&l for applying one coat of synthetic enamel paint incl preparation of old concrete surface complete all as specified and directed

Demolition Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc and rubbish off the premises complete all as specified.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal from site exc. 50 m complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&l for applying two coats synthetic enamel paint over a coat of primer incl preparation of new stone /concrete surface complete all as specified and directed

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as sub base of floor.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M&L for chequrred cement concrete tiles of size 300x300x22 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surface of tiles as floor with and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 60 mm thick, M-35 Machine pressed precast interlocking paver block any shape and size confirming to IS 15658-2006 fixed with cement and pigment glossy finish coloured as approved by GE fixed on sand cushion 40 mm thick & ends to be closed with PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as site reqd to filing the gaps between tiles and road edgs complete all as specified and directed.

M&L for marking 2.5mm thick centre line , side line, stop line, dashes, arrows, brackets & similar work on road surfaces as per IRC pattern with thermo plastic paint of approved quality & make with 8% glass beads laid at temperature of 160 degree centigrate with a special applicator machine complete all specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high per 10 Nos (per CM Height) including painting of base with white and black colour complete all as specified and directed by Engr-in-Charge.

Devi Engineeing

M/s Malinath Electricals

M.D. CONSTRUCTION CO.

M/S HARIOM CONSTRUCTION COMPANY