2025-26 15th FC Tied 2nd ward mc poigai lattion Maitnance in Sambavarvadakarai TP

Dismantling Floor tiles Mosaic-in-situ finish in cement mortar in flooring and in wall surface all other in incidental charges etc complete.

Dismantling of Plain cement concrete using all tools and plants rental charges ,including cost of removing the dismantle the rubbish all other in incidental charges etc complete.

Dismantling dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs all other in incidental charges etc complete.

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete

Floor Finishing First Quality Design Ceramic tiles of All colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete

Supply and fixing in position best quality of approved make Indian Water closet of size 580 x 440 mm with all accessories such as P' trap or S trap confirming to IS 2556 part XII with sand cushion and forming flooring alround the closet using 40 mm leveling course 1:4:8 -100 mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the disturbed potion to original condition without leakage etc., including Labour charges for fixing etc., (Colour)

Dadooing walls with Glazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.

Plastering in cement mortar 1:5 (one cement Five sand) using 12mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification.

Painting new iron work with two coats of best first quality synthetic enamel paint of approved colour over the existing red oxide primer coat as directed by departmental officers complete complying with standard specification.