REPAIR TO RUNWAY SIGN BOARDS SLOGAN BOARDS WIND SOCKS AND DTGMs AT ICGAS DAMAN

Amount

Demolition of plain cement concrete unreinforced in any position n.exc 15 cm thick and removal of the same outside MD land etc complete all as specified and as directed by engr-In-Charge.

M&L for 100 mm thick cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregage finished even and smooth without using extra cement complete all as specified and as directed by engr-In-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by engr-In-Charge

S&F for Framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by engr-In-Charge

S&Fsteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S 1161-1998 grade St-240

S&F as in repairs 1.25 mm thick mild steel, plain, black sheet in wall clading, steel gates and similar works , cut to size , holes punched; incl round headed screws, clout nails or rivets and fixed to steel framing with plain 40mm lap joints with riveted or welded or welded seams incl bending or turning up, mitred angles etc as required complete all as specified and as directed .

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-In-Charge.

S&F 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed by engr-In-Charge

M&L for two coats of synthetic enamel paint over a coat of red oxide incl preparation of new steel surfaces complete all as specified and as direted .

S&F as in repairs of 10mm thick clear transparant polycarbonate sheet as in sign boards cut to sizes as required and fixed in the sliding arrangements of frame work etc complete all as specified and directed.

S&F as in repairs of vinyl sheet as in lines ,dashes, arrows, lettters etc in any colour and size not exc 60 cm height on any colour vinyl sheet pasted on transparant polycarbonate sheets all as per manufacturers instructions and as specified and as directed .

M&L in re-writing or repainting on wall surfaces, letters of figures (Block Romen,Italic or Indian) not exc 60 cm high using syenthetic enamel paint etc complete all as specified and as direted .

M&L in re-writing or repainting on wall surfaces, Stops, commas, short lines, dashes, hyphens, brackets, etc high using syenthetic enamel paint etc complete all as specified and as direted .

M&L in re-writing or repainting on wall surfaces, index hands (natural size) or arrows (up to 40Cm long) using syenthetic enamel paint etc complete all as specified and directed.

Dismantling unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as direted .

Excavation in post hole or similar holes in soft/loose soil each not exceeding 0.50 cum including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick each layer, watering and removing surplus soil to distance not exceeding 50 metre and making good surface, complete all as specified and as directed .

M&L cement concrete Type C -2, 1:3:6 (40mm graded stone aggregate) in foundations, filling and mass concrete as in columns, pillars, boundary pillars and posts etc ,complete all as specified and directed .

M&L Clean sawn second class hard-wood in scantlings, complete all as specified and as direted by EIC.

S&F as in repairs 25mm dia Low density polyethylene black colour pipes of pressure rating 6 kg/cm2 fixed on wooden frame work using screw,nail etc. complete all as specified and as direted by EIC.

S&F as in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc. complete all as specified and as direted .

M&L two coat of syenthetic enamel paint over a coat of pink primer incl preparation of new wood and wooden based surfaces , complete all as specified and as direted .

S&F as in repair of plastic vinyl sign figures, letters with reflective orange colour tape on DTGMs , complete all as specified and directed .

S&F as in repairs 75mm long butt hinges, medium weight, cold rolled mild steel fixed with welded to MS steel members, complete all as specified and directed .

S&F as in repairs 125mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed .

Demolition of Brick work or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Cement concrete Type D2, 1:4:8 (40mm garded stone aggregate) in foundations, filling and mass concrete , complete all as directed .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil.

Material and labour for brick work with sub class ‘B’ bricks burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified and as directed.

M&L for walling of random rubble uncoursed well bounded bedded and solidly hearthed and built in cement mortar(1:4) complete all as spd and directed .

M&L for keyed pointing in cement mortar (1:3) to random rubble walling uncoursed ,complete all as specified and directed.

Material and Labour for pre-cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in pre-cast fencing posts, average cross sectional area exceeding 100 Sqcm but not exceeding 250 Sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops, fixing in position, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed .

M&L for preparing newly plastered surfaces and applying two coats of weather proof Acrylic Exterior Emulsion paint over a coat of primer complete all as spd and directed .

Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work , complete all as specified and as directed.

M & L for hardcore with broken stone boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15mm thickeach layer , watered and rammed to a true surface , complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick each layer ,complete all as directed by Engr-In-Charge

Removal of surplus excavated soil/materials to out side MD land to any distance complete all as directed. Schedule of credit is Rs 29010.83

neeraj electricals